An Equivalent Circuit Model for Ionic Polymer-Metal Composites and their Performance Improvement by a Clay-Based Polymer Nano-Composite Technique

Abstract

Ionic Polymer-Metal Composite (IPMC) is a new class of polymeric material exhibiting large strain with inherent soft actuation. The observed motion characteristics of an IPMC subjected to an electric field is highly nonlinear. This is believed to be due primarily to the particle electrodes on the IPMC surface, which is inherently both capacitive and resistive due to particle separation and density. Knowing that the value of resistivity and capacity can be manipulated by the number of metal platings applied to the IPMC, the force response of an IPMC when subjected to an imposed electric field is due to the interaction of an array of capacitors and resistors along with ionic migration. In this effort we attempt to incorporate a capacitive and resistive model into the linear irreversible thermodynamic model. The advantages of using such a model are (i) the possible dynamic predictability of the material itself in connection with capacitive responses; and (ii) the realization of capacitive and resistive effect arising from the particle electrodes and the base polymer, respectively. The behavior of the proposed model can explain typical experimentally obtained values well. Also, an experimental effort to improve the properties of the base polymer was carried out by a novel nanocomposite technique. The experiment results on the current/voltage (I/V) curves indicate that the starting material of ionic polymer-metal composites (IPMCs) can be optimized to create effective polymer actuators.

Get full access to this article

View all access options for this article.

References

Alexandre, M. , Dubois, P. 2002 . ”Polymer-layered Silicate Nanocomposites: Preparation, Properties, and Uses of a New Class of Materials,” Materials Science and Engineering , 28 : 1 - 63 .

Asaka, A. , Oguro, K. , Nishimura, Misuhata, M. and Takenaka, H. 1995 . ”Bending of Polyelectrolyte Membrane-Platinum Composites by Electric Stimuli, I. Response Characteristics to Various Wave Forms,” Polymer Journal , 27 : 436 - 440 .

De Gennes, P.G. , Okumura, K. , Shahinpoor, M. and Kim, K.J. 2000 . ”Mechanoelectric Effects in Ionic Gels,” Europhysics Letters , 50 ( 4 ): 513 - 518 .

De Groot, S.R. and Mazur, P. 1966 . Thermodynamics of Irreversible Processes , North-Holland Publications , Amsterdam .

Eisenberg, A. and Yeager, H.L. 1982 . ”Perfluorinated Ionomer Membranes,” ACS Symposium Series Vol. 180 , ACS , Washington DC .

Hashimoto, T. , Fujimura, M. and Kawai, H. 1982 . ”Structure of Sulfonated and Caboxylated Perfluorinated Ionomer Membrane,” In: Eisenberg, A. and Yeager, H (eds), Perfluorinated Ionomer Membranes , ACS Symposium Series Vol. 180 .

Kim, K.J. and Shahinpoor, M. 2002a . ”Application of Polyelectrolytes in Ionic Polymeric Sensors, Actuators, and Artificial Muscles,” Review Chapter In: Tripathy, S. , Kumar, J. and Nalwa, H.S. (eds), Handbook of Polyelectrolytes , Vol. 3, Chapt. 1, pp. 1 - 22 , American Scientific Publishers (ASP) , Stevenson Ranch, CA

Kim, K.J. and Shahinpoor, M. 2002b . ”Development of Three Dimensional Ionic Polymer-Metal Composites as Artificial Muscles,” Polymer , 43 ( 3 ): 797 - 802 .

Kim, K.J. and Shahinpoor, M. 2003 . ”Effective Diffusivity of Nanoscale Ion-Water Clusters within Ion-Exchange Membranes Determined by a Novel Mechano-Electric Technique,” International Journal of Hydrogen Energy , 28 ( 1 ): 85 - 90 .

10.

Mallavarapu, K. , Newbury, K. and Leo, D. 2001. ”Feedback Control of the Bending Response of Ionic Polymer-Metal Composite Actuators,” In: Proceedings of Smart Structures and Materials 2001-Electroactive Polymer Actuators and Devices , Vol. 4329, pp. 301 - 310 .

11.

Millet, P. , Pineri, M. and Durand, R. 1989 . ”New Solid Polymer Electrolyte Composites for Water Electrolysis,” Journal of Applied Electrochemistry , 19 : 162 - 166 .

12.

Nam, J.-D. , Lee, J.H. , Choi, H.R. , Kim, H.M. , Jeon, J.W. , Paquette, J , Kim K.J. , Tak, Y.S. and Xu, H. March 2002. ”Development of Electroactive Silicate Nanocomposites Prepared for Use as Ionic Polymer-Metal Composites (IPMC's) Artificial Muscles and Sensors,” In: Proceedings of SPIE - Smart Structures and Materials , San Diego, CA , paper #4965-42.

13.

Nemat-Nasser, S. and Thomas, C.W. 2001 . ”Ionomeric Polymer-Metal Composites,” In: Bar-Cohen, Y. (ed.), Electroactive Polymer (EAP) Actuators as Artificial Muscles, Reality, Potential, and Challenges , SPIE Press , Washington, U.S.A.

14.

Newbury, K.M. and Leo, D.J. 2001. ”Mechanical Work and Electromechanical Coupling in Ionic Polymer Bender Actuators,” In: Proceedings of the ASME International Mechanical Engineering Congress and Exposition , Paper Number AD-23705.

15.

Oguro, K. , Asaka, K. and Takenaka, H. 1993 . ”Actuator Element,” U.S. Patent #5,268,082.

16.

Onish, K. , Sewa, S. , Asaka, K. , Fugiwara, N. and Oguro, K. 2000. ”Bending Response of Polymer Electrolyte Actuator,” In: Proceedings of SPIE Smart Structures and Materials , pp. 121 - 128 .

17.

Sadeghipour, K. , Salomon, R. and Neogi, S. 1992 . ”Development of a Novel Electrochemically Active Membranes and Smart Material Based Vibration Sensor/Damper,” Smart Materials and Structures , 1 ( 2 ): 172 - 179 .

18.

Shahinpoor, M. , Adolf, D. , Segalman, D. and Witkowski, W. 1993 . ”Electrically Controlled Polymeric Gel Actuators,” U.S. Patent #5,250,167.

19.

Shahinpoor, M. and Kim, K.J. 2002a . ”A Novel Physically-Loaded and Interlocked Electrode Developed for Ionic Polymer-Metal Composites (IPMCs),” Actuator and Sensors: A. Physical , 96 : 125 - 132 .

20.

Shahinpoor, M. and Kim, K.J. 2002b . ”Solid-state Actuator Exhibiting Large Electromechanical Effect,” Applied Physics Letters (APL) , 80 ( 18 ): 3445 - 3447 .

21.

Shahinpoor, M. and Kim, K.J. 2001 . ”Ionic Polymer-Metal Composites: I. Fundamentals,” Smart Materials and Structures , 10 : 1 - 15 .

22.

Shahinpoor, M. and Kim, K.J. 2000 . ”The Effect of Surface-Electrode Resistance on the Performance of Ionic Polymer-Metal Composite (IPMC) Artificial Muscles,” Smart Materials and Structures , 9 ( 4 ): 543 - 551 .

23.

Shahinpoor, M. , ”Electro-mechanics of Iono-elastic Beams as Electrically Controllable Artificial Muscles” , SPIE processings , 1999 , pp. 109 - 120 .

24.

Shahinpoor, M. and Mojarrad, M. 2000 . ”Soft Actuators and Artificial Muscles,” U.S. Patent, #6,109,852.

25.

Shahinpoor, M. , Bar-Cohen, Y. , Simpon, J.O. and Smith, J. 1998 . ”Ionic Polymer-Metal Composites (IPMC) as Biomimetic Sensors and Structures - A Review,” Smart Materials and Structures , 7 : 15 - 30 .

26.

Shahinpoor, M. , Kim, K.J. and Leo, D.J. 2003 . ”Ionic Polymer-Metal Composites as Multifunctional Materials,” Polymer Composites , 24 ( 1 ): 24 - 33 .

27.

Tadokoro, S. , Takamori, T. and Oguro, K. 2001 . ”Modeling IPMC for Design of Actuation Mechanisms,” In: Bar-Cohen, Y. (ed.) Electroactive Polymer (EAP) Actuators as Artificial Muscles, Reality, Potential, and Challenges , SPIE Press , Washington, U.S.A.

28.

Theng, B.K.G. 1974 . The Chemistry of Clay-Organic Reactions , Wiley , New York .

29.

Thomas, R.E. and Rosa, A.J. 1998 . The Analysis and Design of Linear Circuits , pp. 305 - 432 , Prentice Hall, Upper Saddle River , NJ .

30.

Yeager, H.L. and Steck, A. 1981 . ”Cations and Water Diffusion in Nafion Ion Exchange Membranes: Influence of Polymer Structure,” Journal of Electrochemical Society , 128 ( 9 ): 1880 - 1884 .