Linear Location of Acoustic Emission Sources with a Single Channel Distributed Sensor

Abstract

In this paper, distributed sensors are evaluated for structural health monitoring. A distributed sensor is formed by electrically connecting a number of acoustic emission sensor nodes in series. The individual nodes are placed at strategic locations on the structure. This arrangement allows the detection of acoustic emissions occurring at multiple regions of the structure using a single monitoring channel, and hence significantly reduces the cost, complexity, and weight of on-board instrumentation. The performance of the distributed sensor is compared against that of conventional single node sensors on a fiberglass bar and on a graphite epoxy sandwich panel using simulated acoustic emission signals. These comparisons indicate that a single distributed sensor can monitor large areas of the structure without degrading the signal amplitude or the frequency bandwidth. A new analysis procedure to determine the location of the acoustic emission source from this single channel data is also introduced. Experiments performed on a steel bar indicate that reasonable accuracy can be achieved in locating the acoustic emission sources along a line segment just using the single channel data from the distributed sensor.

Get full access to this article

View all access options for this article.

References

Auld, B.A. (1990). Acoustic Fields and Waves in Solids. Vol. II. Krieger Publishers.

Achenbach, J.D. (1973). Wave Propagation in Elastic Solids. North Holland Publishing Company.

Alleyne, D.N. and Cawley, P. (1992). The interaction of lamb waves with defects. IEEE Trans. Ultrasonics, Ferroelectrics, Freq. Control, 39: 381-397.

Anon (1989). Nondestructive evaluation and quality control. Metals Handbook. 9th Edn. Vol. 17. ASM Intl.

Chee, C.Y.K. , Tong, L. and Steven, G.P. (January 1998). A review on the modeling of piezoelectric sensors and actuators incorporated in intelligent structures. J. Intelligent Material Systems and Structures, 9: 3-19.

Cordell, T.M. (1995). Life management of aging air force aircraft: NDE Perspective. SPIE, 2455(34).

Komsky, I.N. and Achenbach, J.D. (1996). Ultrasonic imaging of corrosion and fatigue cracks in multilayered airplane structures. SPIE, 2945.

Miller, R. (1987). Acoustic emission testing. Nondestructive Testing Handbook. 2nd Edn. Vol. 5. American Society of Nondestructive Testing.

Ness, S. and Sherlock, C.N. (1996). Nondestructive testing overview. Nondestructive Testing Handbook. Vol. 10. American Society for Nondestructive Testing.

10.

Smith, C.D. (1996). Federal aviation administration inspection research and development program. SPIE, 2495.

11.

Sundaresan, M.J. , Ghoshal, A. , Schulz, M.J. and Pai, P.F. (1999). Acoustic emission sensing using piezoceramic and active fiber composite patches. ASNT 1999 Fall Conference, Phoenix, AZ., 11-15 October.

12.

Sundaresan, M.J., Ghoshal, A. and Schulz, M.J. (June 2000). continuous acoustic emission and vibration sensor. Patent application.

13.

Sundaresan, M.J. , Ghoshal, A. and Schulz, M.J. (2001a). An intelligent sensor to measure acoustic waves in plates. submitted to Journal of Intelligent Material Systems and Structures.

14.

Sundaresan, M.J. , Ghoshal, A. and Schulz, M.J. (2001b). An intelligent sensor for damage detection in bars. submitted to Journal of Smart Materials and Structures.

15.

Wasley, R.J. (1973). Stress Wave Propagation in Solids. New York: Marcel Dekker, Inc.