The topics of performance-based fire safety engineering* and performance-based building codes are the focus of significant discussion, research, and development worldwide. Although the two topics are highly related, they are indeed separate concepts that can each stand alone. This paper discusses the elements of performance-based fire safety engineering and outlines a basic application of methodology. Special attention is given to identifying specific client objectives that can be quantified in engineering terms as the basis for design.
Get full access to this article
View all access options for this article.
References
1.
Meacham, B.J. , "International Development and Use of Performance-Based Building Codes and Fire Safety Design Methods," SFPEBulletin , March/ April 1995.
2.
Building Regulations, 1985, United Kingdom.
3.
Total Fire Safety Design System of Buildings, Ministry of Construction, The Building Center of Japan, Tokyo, 1989.
4.
Fire Administration Authorization Act of 1992, Public Law 102-522, Section 106, Fire Safety Systems in Federally Assisted Buildings, of Title I, United States Fire Administration (commonly referred to as the Federal Fire Safety Act of 1992).
5.
Appendix D, FireSafety Criteria, U.S. General Services Administration, 1972.
6.
Fitzgerald, R.W. , TheAnatomy of Building Firesafety, Worcester Polytechnic Institute , Worcester, MA, 1982.
7.
NFPA 550, National Fire Protection Association, Quincy, MA, 1985.
8.
NFPA 101, The Life Safety Code, National Fire Protection Association, Quincy, MA, 1988.
9.
Proceedings of the Conference on Fire Safety Design in the 21st Century, Worcester Polytechnic Institute, Worcester, Massachusetts, May 1991.
10.
Wakamatsu, T. , "Fire Research in Japan -- Development of a Design System for Building Fire Safety," Proceedings of the 6th Joint Panel Meeting, UJNR Panel on Fire Research and Safety, Tokyo, Japan, May 1982.
11.
Warren Centre, Project Report and Technical Papers, Books 1 and 2, Fire Safety Engineering Project, The Warren Centre for Advanced Engineering , University of Sydney, Sydney. Australia, December 1989.
12.
Cooke, G. and Deakin, G., "Future Codes for Fire Safety Design," Proceedings of the Technical Conference Fire Safety by Design: A Framework for the Future, Fire Research Station, Borehamwood, U.K., 10 November 1993.
13.
ISO/TC92/SC4, The Application of Fire Safety Performance Concepts to Design Objectives.
14.
CIB W14 Subgroup on Engineering Evaluation of Building Firesafety.
15.
Buchanan, A.H. , Fire Engineering Design Guide, Centre for Advanced Engineering, University of Canterbury, Christchurch, New Zealand, July 1994.
16.
Custer, R.L.P. and Meacham, B.J., Society of Fire Protection Engineers course on Performance-Based Fire Detection and Signalling Systems: A Tutorial for Engineers, Oakland, CA (March 1993), Atlanta, GA (September 1993), and Auckland , New Zealand (February 1995).
17.
Custer, Richard L.P. and Meacham, Brian J., Society of Fire Protection Engineers course Introduction to Performance-Based Design for Fire Protection Engineers , Denver, CO, May 1995.
18.
Custer, R.L.P. , "Progress on Computer Modeling and Performance-Based Detection System Design in the United States," European Society for Automatic Alarm Systems, Duisberg, Germany, January 14, 1994. (Proceedings in press)
19.
Custer, R., Meacham, B., and Wood, C., "Performance-Based Design Techniques for Detection and Special Suppression Applications," Proceedings of the SFPE Engineering Seminars on Advances in Detection and Suppression Technology, San Francisco, 18 May 1994.
20.
Custer, R.L.P., "Introduction to the Use of Fire Dynamics in Performance-Based Design ," Proceedings of the SFPE Technical Symposium: Applications of Fire Dynamics, University of British Columbia , Vancouver, British Columbia, 10-11 July 1995.
21.
Meacham, B.J. , "Factors Affecting the Early Detection of Fire in Electronic Equipment and Cable Installations," Fire Technology , Vol. 29, No. 1, February 1993.
22.
Meacham, B.J. , "Fire Protection in Cable and Service Tunnels: A Goal Oriented Approach," Proceedings of the International Conference on Safety in Cable and Service Tunnels, London , England, November 1993. (Independent Technical Conferences, Ltd., Kempston, Beds.)
23.
Custer, R., Demerest, D., Dobson, P., and Donohue, J., "Detecting and Minimizing Potential Impacts from HVDC Valve Hall Fires," IEEE Transactions onPower Delivery, Vol. 7, Issue 1, January/February 1991.
24.
Capaul, T. and Meacham, B.J., "Structural Fire Resistance Analysis of a Diesel Engine Driven Power Generating Plant: A Performance-Based Approach," Proceedings of the SFPE Engineering Seminars on Performance-Based Fire Safety Engineering, Phoenix, Arizona, November 1993.
25.
Meacham, B.J. , "Fire Safety in Nuclear Facilities: A Performance-Based Approach," Proceedings of the Post SMiRT Conference No. 6 on Fire Safety in Nuclear Facilities, Heidelberg , Germany, August 1993.
26.
Capaul, T., Meacham, B.J., and Sica, G., "Resistenza Antincendio di un Impianto di Generalzione con Motore Diesel," Antincendio, No. 2, Ministero dell'Interno, Rome, Italy, February 1994.
27.
Capaul, T., Meacham, B.J., and Fontana, M., "The Application of a Performance-Based Evaluation and Design Approach to a Structural Fire Resistance Problem," to be published in the Proceedings of the IAFSS First European Symposium on Fire Safety Science, ETH, Zurich, Switzerland, August 1995.
28.
Meacham, B.J. , Capaul, T., and Custer, R.L.P., "Engineering Fire Protection in Large Enclosed Spaces: A Performance-Based Approach," to be published in the Proceedings of the First International Conference on Fire Safety and Security of Large Enclosed Spaces, Lille , France, Independent Technical Conferences, Ltd., September 1995.
29.
Schifiliti, R.P. , Meacham, B.J., and Custer, R.L.P., "Design of Detection Systems," SFPE Handbook of Fire Protection Engineering, 2nd edition, National Fire Protection Association, Quincy, MA, 1995.
30.
Standard Test for Determining Material Ignition and Flame Spread Properties, ASTM, Philadelphia, PA.
31.
Standard Test Method for Heat and Visible Smoke Release Rates for Materials and Products Using an Oxygen Consumption Calorimeter, ASTM, Philadelphia, PA, 1990.
32.
National Materials Advisory Board, Fire Safety Aspects of Polymeric Materials, Volume 4: Fire Dynamics and Scenarios , National Academy of Sciences, Washington, D.C., 1978, p. 9.
33.
Drysdale, D.D. , An Introduction to Fire Dynamics, John Wiley & Sons, NY, NY, 1985 .
34.
DiNenno, Philip J., Editor-in- Chief, SFPE Handbook of Fire Protection Engineering, 1st Edition, National Fire Protection Association, Quincy, MA, 1988.
35.
NFPA 92B, Guide for Smoke Management in Atria, 1991 edition, National Fire Protection Association, Quincy, MA.
36.
NFPA 72, National Fire Alarm Code, National Fire Protection Association, Quincy, MA.
37.
Oleszkiewicz, I., "The Concept and Practice of Performance-Based Building Regulations," National Research Council Canada, Internal Report No. 697, Ottawa, Canada, November 1994.
38.
Building Industry Commission, " Reform of Building Controls, Volume I," ISBN 0-477-01545-X, Wellington, New Zealand, January 1990.
39.
BOCA National Building Code, Section 921.3, Building Officials Congress of America, 1993.
40.
Section 5: Fire Risk Analysis, SFPE Handbook of Fire Protection Engineering, 2nd Edition, National Fire Protection Association, Quincy, MA1995.
41.
National Materials Advisory Board; Guidelines for Developing and Analyzing Fire Scenarios ; Fire Safety Aspects of Polymeric Materials, Volume 4: Fire Dynamics and Scenarios, National Academy of Sciences, Washington, D.C., 1978, pp. 42-56.
42.
Tewarson, A., "Generation of Heat and Chemical Compounds in Fire," SFPE Handbook of Fire Protection Engineering, 1st Edition, National Fire Protection Association, Quincy, MA, 1988.
43.
Mulholland, G.W. , "Smoke Production and Properties," SFPE Handbook of Fire Protection Engineering, 1st Edition, National Fire Protection Association, Quincy, MA, 1988.
44.
Babrauskas, V., "Burning Rates," SFPE Handbook of Fire Protection Engineering, 1st Edition, National Fire Protection Association , Quincy, MA, 1988.
45.
Deal, S., Technical Reference Guide for FPETOOL Version 3.2, NISTIR 5486, U.S. Department of Commerce, National Institute of Standards and Technology , Gaithersburg, MD, August 1994.
46.
NFPA 12, National Fire Protection Association, Quincy, MA,
47.
Friedman, R. , "An International Survey of Computer Models for Fire and Smoke," Journal of Fire Protection Engineering , Vol. 4, No. 3, 1992, pp. 81-92.
48.
Nelson, H.E., "Computer Models in Fire Reconstruction," Proceedings of the SFPE Symposium on ComputerApplications in Fire Protection Engineering, 28-29 June1993, Society of Fire Protection Engineers and Worcester Polytechnic Institute.
49.
Custer, R.L.P. , "Computer Modeling in Fire Reconstruction and Failure Analysis," Proceedings of the SFPE Symposium on Computer Applications in Fire Protection Engineering, 28-29 June1993, Society of Fire Protection Engineers and Worcester Polytechnic Institute.
