ThompsonNJCousinsEW. The FM construction materials calorimeter. Quarterly of the National Fire Protection Association. Vol. 52, No. 3, Boston: MA, January 1959.
2.
EmmonsHW. A U. S. Program of Fire Research. Quarterly of the National Fire Protection Association. Vol. 52, No. 3, Boston: MA, January 1959.
3.
SmithEE. Heat release rate of building materials. Philadelphia, PA: STP502, American Society for Testing and Materials1971.
4.
ParkerWJLongME. Development of a heat release rate calorimeter at NBS. Philadelphia, PA: STP502, American Society for Testing and Materials, 1971.
5.
American Society for Testing and Materials. Standard test method for surface burning characteristics of building materials. Philadelphia, PA: ASTM E 84-70, American Society for Testing and Materials, 1970.
6.
ThorntonWM. The relation of oxygen to the heat of combustion of organic compounds”. Philosophical Magazine1917; 33: 196–203.
7.
HuggettC. Oxygen consumption calorimetry. Fall Technical Meeting on Chemical and Physical Processes in Combustion, Combustion Institute/Eastern States Section, Pittsburgh, PA, December 1978.
8.
BeasonDGAlvaresNJ. Variations in the burning characteristics of low porosity cribs. Combustion Institute/Western States Section, Spring 1977.
9.
ParkerWJ. An investigation of the fire environment in the ASTM E 84 tunnel test. NBS Technical Note 945, National Bureau of Standards, August 1977.
10.
SensenigDLParkerWJ. New concept for rate of heat release measurements by oxygen consumption. The Combustion Institute/Eastern Section, Pittsburgh, PA, December 1978.
11.
BabrauskasVLawsonJRWaltonWDTwilleyWH. Upholstered furniture heat release rates measured with a furniture calorimeter. Gaithersburg, MD: NBSIR 82-2604. National Bureau of Standards, 1982.
12.
BabrauskasV. Development of the cone calorimeter – A bench-scale heat release rate apparatus based on oxygen consumption. Gaithersburg, MD: NBSIR 82-2611. National Bureau of Standards, 1982.
13.
TwilleyWHBabrauskasV. User’s guide for the cone calorimeter. NBS Special Publication 745. Gaithersburg MD. National Bureau of Standards, 1988.
14.
American Society for Testing and Materials. E1354-04, Standard test method for heat and visible smoke release rates for materials and products using an oxygen consumption calorimeter. West Conshohocken, PA: ASTM International, 2007.