Fracture Behaviour of Chopped Glass Strand Reinforced Phenolic Composites

Abstract

Modified phenolic composites were fabricated by compression moulding a mixture of chopped glass strands and a cashew nut shell liquid modified phenolic resin. Single edge notched bend (SENB) tests, double edge notched (DEN) tension tests and 3-point flexure tests on unnotched specimens were conducted at various fibre volume fractions and strand lengths. The candidate stress intensity factors of SENB specimens were significantly higher than those of DEN specimens. Glass strand/phenolic interface debonding and strand pull-out were observed for both SENB and DEN specimens. In addition, the DEN specimens exhibited a considerable degree of splitting of glass strands parallel to their axes. By increasing the fibre volume fraction and the strand length, it was possible to improve the flexural strength without adversely affecting the fracture toughness.

Get full access to this article

View all access options for this article.

References

O'Connor

and Blum

F.D.

, Thermal stability of substituted phenol-formaldehyde resins, J. Appl. Poly. Sci., 33 (1987) 1933.

Subramaniam

, Sinha

B.R.

, Blum

F.D.

, Chen

Y-R.

and Dharani

L.R.

, Glass fiber based friction materials, Intern. J. Polymeric Mater., 15 (1991) 93.

Gopal

, Dharani

L.R.

and Blum

F.D.

, Fade and wear characteristics of a glass-fiber reinforced phenolic friction material, Wear, 174 (1994) 119.

Announcement, Glass/phenolic mouldings to be used in Channel Tunnel locomotives, Compos., 23, 67 (1992).

Strong

A.B.

, Fundamentals of Composites Manufacturing, Society of Manufacturing Engineers, Dearborn, MI, (1989).

Clarke

J.W.

and Ayles

, In Modern Plastics Encyclopedia, 66, 149 (Mid-October, 1989).

Narayan

, Sinha

B.R.

, Blum

F.D.

, Dharani

L.R.

and Chen

Y-R.

, Non-asbestos friction materials: mechanical properties of binary systems, SAMPE Quart., 21 (1990) 17.

Dharani

L.R.

, Chen

Y-R.

, Narayan

and Blum

F.D.

, Non-asbestos friction materials: fracture toughness of binary systems, SAMPE Quart., 22 (1990) 62.

Nimmer

R.R.

and Trantina

G.G.

, In Recent Advances in Composites in the United States and Japan, ASTM STP 864, American Society for Testing and Materials, Philadelphia, (1989) 556.

10.

Tattersall

H.G.

and Tappin

, The work of fracture and its measurements in metals, ceramics and other materials, J. Mater. Sci., 1, (1966) 296.

11.

Davidge

R.W.

and Tappin

R.W.

, The effective surface energy of brittle materials, J. Mater. Sci., 3 (1968) 165.

12.

Beaumont

P.W.R.

and Phillips

D.C.

, The fracture energy of a glass fibre composite, J. Mater. Sci., 7 (1968) 165.

13.

Helfet

J.L.

and Harris

, Fracture toughness of composites reinforced with discontinuous fibers, J. Mater. Sci., 7 (1972) 494.

14.

Owen

M.J.

and Bishop

P.J.

, Critical stress intensity factors applied to glass reinforced polyester resin, J. Comp. Mater., 7 (1973) 146.

15.

Gaggar

S.K.

and Broutman

L.J.

, Strength and fracture properties of random fibre polyester composites, Fib. Sci. Tech., 9 (1976) 205.

16.

Gaggar

and Broutman

L.J.

, In Flaw Growth and Fracture, ASTM STP 631, American Society for Testing and Materials, (1977) 310.

17.

Kumar

A.N.

, Pandey

R.K.

and Nanda

, Crack growth characterization in a short fiber glass-epoxy composite, Comp. Sci. Tech., 29 (1987) 17.

18.

Garg

A.C.

and Trotman

C.K.

, Influence of water on fracture behavior of random fiber glass composites, Engrg. Fract. Mech., 13 (1980) 357.

19.

Nikpur

, Chen

Y.F.

and Kardos

J.L.

, Fracture toughness of unidirectional short-fiber reinforced epoxy composites, Comp. Sci. Tech., 38 (1990) 175.

20.

Brown

W.F.

and Srawley

J.E.

, Plane Strain Crack Toughness Testing of High Strength Metallic Materials, ASTM STP 410, American Society for testing and Materials, Philadelphia (1966).

21.

Subramaniam

, Blum

F.D.

and Dharani

L.R.

, Effects of moisture and other contaminants in friction composites, Polym. Engrg. Sci., 33 (1993) 1204.