The benefits and disadvantages of fibre-reinforced plastics (FRP) for the construction of automotive pedal boxes are described. This review covers the methodologies for the design and manufacture of FRP pedal box systems and discusses the weight and cost savings that can be achieved.
References
1.
SeifTertU. and WalzerP., The future for Automotive Technology, Frances Pinter, London, (1991)
BrüningsW.-D., HauckC. and MüllerD., Development of vehicle pedals made from glass fibre reinforced polyamide, Kunststoffe German Plastics, 79, 3 (1989) 23
Birkbys Plastics Limited Fact Sheet, Plastics as metal replacements, Birkbys Plastics Limited, Liversedge, West Yorkshire, (1995)
6.
Anon., New customers choose Birkbys' expertise, European automotive team work closely with Jaguar on new X300 range, Hot Off the Press!, Birkbys Plastics Limited, Liversedge, West Yorkshire Publication, 9 (1995) 2
7.
O’TooleK., Practical plastic on the road, Engineering Materials and Design, November (1989) 39
8.
WoodR., Automotive Engineering Plastics, Pentech Press, London (1991)
9.
BrüningsW.-D., HauckC. and MüllerD., Test on prototypes of car pedals made from glass reinforced polyamide, Kunststoffe German Plastics, 79, 5, (1989) 37
10.
HauckC., CAE in the development of plastic structure, Plastverarbeiter, 39, 1 (1988) 20
11.
KloopH., Development of pedal work for passenger cars using modern methods, VDI Berichte, No. 700.2, (1988) 121
12.
IkedaT., IwamotoK. and SatoT., Application study of injection mouldings plastics to accelerator pedal by using CAE, SAE 1990 Transactions, Journal of Materials and Manufacturing, Vol. 99 (1990) 893
13.
Anon., Engineering plastics role towards 21st Century vehicles: potentials of engineering plastics for new products development, Porima Daijesuto (Polymer Digest), 45, 3 (1993) 65
14.
TietzJ., Examples of modern uses of polyamides in cars, Kunststoffe, 4 (1993) 44
15.
BrookmanA.P., MazerP. and SchmeyerD., Compounds based on ultra high molecular weight PVC resins for use in automotive applications, Proceedings of the ANTEC ‘92 -Shaping the Future, SAE Conference, volume. 1, Detroit, Michigan, 3-7 May (1992) 1457
16.
BaumannH.U., Clutch pedals of glass fibre reinforced polyamide, Kunststoffe German Plastics, 81, 3 (1991) 36
17.
BaumannH.U. and Baumann,H., European Patent EP 389684, (1989)
18.
ParzefallW., German Patent DE4434254, (1995)
19.
HansmannJ. and BartczakA., Clutch and brake pedals made of plastics, Kunststoffe German Plastics, 81, 6, (1991) 26
20.
GennaroA. and FaltoniG., Advanced design with reinforced polyamides, Macplas International, 3, 2 (1992) 108
21.
RischbieterF., TipkeJ. and ZemlinJ., German Patent DE 4226352, (1993)
22.
ZemlinJ., German Patent DE 4230150, (1992)
23.
ZemlinJ., German Patent DE 4122283, (1992)
24.
WigottskyV., It’s ‘go’ for more plastics in automotive, Plastics Engineering, 41,10 (1985) 27
25.
BroughtonB., Division Material Metrology, National Physical Laboratory, Teddington, Middlesex, Personal Communication, (1995)
26.
GandyD., European Patent EP 0430600A1, (1990)
27.
SapuanS.M. and AbdallaH.S., A prototype knowledge-based system for the material selection of polymeric-based composite for automotive components, Composites Part A: Applied Science and Manufacturing, 29A, 7, (1998) 731
28.
SapuanS.M., AbdallaH.S. and NashR.J., Proposed design and manufacturing techniques of polymeric based composite automotive pedal box system, Proceedings of the 11th National Manufacturing Research Conference, Leicester, De Montfort University, Taylor & Francis Ltd., 12-14 September (1995) 77
29.
SapuanS.M., AbdallaH.S. and NashR.J., An expert system for material selection of polymeric composite automotive pedal box system, Proceedings of the Fifth International Conference on Automated Composites, Glasgow, Institute of Materials, 4-5 September (1997) 373
30.
SapuanS.M. and AbdallaH.S., A concurrent engineering polymeric-composite system for automotive components., Proceedings of the First Symposium on Knowledge Exchange -Manufacturing, Logistics and Management, Loughborough, Loughborough University, Mechanical Engineering Publications Ltd., 24 July (1997) 33
31.
SapuanS.M., A concurrent engineering approach to the design of fibre reinforced plastics for automotive pedal system, Proceedings of the Fourth International Conference on advances in Materials and Processing Technologies (AMPT 98), Kuala Lumpur, 24-28 August (1998) 1083
32.
SapuanS.M., A Concurrent Engineering Design System for Polymeric-Based Composite Automotive Components, Ph.D. Thesis, De Montfort University, Leicester, (1998)
33.
BradburyL.R., The use of thermoplastic brake pedal bracket, Proceedings of Plastics on the road 1996 Conference, Solihull, Institute of Materials, 25-26 November (1996) 1
34.
ReadeL. and AnscombeN., Plastic pedal replaces aluminium, European Plastics News, 23, 2, (1996) 44
35.
Anon., Step on it! Vehicle pedals - injection moulded from Ultramid A3VVG7, European Plastics News, Vol. 23, No. 9, (1996) 6
PriwitzerM. and SchmidtT., German Patent DE 4301229, (1993)
39.
TipkeJ., European Patent EP 0433702A2, (1991)
40.
HenigueC. and PeugeotM., European Patent EP 0431986 Al, (1991)
41.
ByronD., Rearsby Automotive Limited, Rearsby, Leicestershire, Personal Communication, (1995)
42.
SapuanS.M., Foot on the pedal research, Materials World, 6, 11, (1998) 690
43.
SapuanS.M., A computer-aided material selection for design of automotive safety critical components with novel materials, Paper accepted for publication in Malaysian Journal of Computer Sciences, December (1999)
