Abstract
In this paper, the optical and mechanical properties of injection-moulded plates (thickness: 1 mm) made of poly(methyl methacrylate) (PMMA) and glass particles as filler with a matching refractive index are investigated. Tests show that the orientation resulting from the injection moulding process greatly affects the tensile strength and elongation at break, whereas the elastic modulus merely depends on the filling degree, which is investigated up to 13 vol.%. In terms of the optical properties, the specimens’ haze depends on the difference in the refractive index between a glass and polymer. However, the absolute value of haze increases with increasing filling degree and decreasing particle size. Surface defects resulting from the injection moulding process were found to be the primary reason for this haze, even with identical RI between PMMA and glass.