In the present study, the fatigue, resilience, hardness, and swelling behaviour of natural rubber and recycled acrylonitrile-butadiene rubber (NR/NBRr) blends were studied in the concentration range from 5 to 35 phr of recycled NBR. NBR gloves have excellent resistance to punctures, tear and many types of chemicals, while NR has good physical and mechanical properties. Blending NBRr into the rubber blends improved the processability, stiffness and resilience and conferred excellent oil resistance. The fatigue life of NR/NBRr blends decreased as the NBRr content increased, due to the incompatibility and poor dispersion of NBRr in the NR matrix. However, increasing NBRr content gave NR/NBRr blends better resistance towards swelling and hardness. Both properties increased due to the improvement in crosslink density when more NBRr was added, but the resilience properties exhibited an opposite trend. Scanning electron microscopy study indicated that the recycled NBR shows a coarser and poor dispersion in NR matrix particularly when more NBRr content was used, which leads to lower fatigue life of the NR/NBRr blends.
NorimanN.Z., IsmailH., and RashidA.A.Curing characteristics, mechanical and morphological properties of styrene butadiene rubber/virgin acrylonitrile-butadiene rubber (SBR/vNBR) and styrene butadiene rubber/ recycled acrylonitrile-butadiene rubber (SBR/rNBR) blends. Polymer-Plastics Technology and Engineering, 47, (2008) 1016–1023.
2.
NorimanN.Z., IsmailH., and RashidA.A., Characterization of styrene butadiene rubber/recycled acrylonitrile-butadiene rubber (SBR/NBRr) blends: The effects of epoxidized natural rubber (ENR-50) as a compatibilizer. Polymer Testing, 29, (2010) 200–208.
3.
IsmailH., and HairunezamH.M.The effect of a compatibilizer on curing characteristics, mechanical properties and oil resistance of styrene butadiene rubber/epoxidized natural rubber blends. European Polymer Journal, 37, (2001) 39–44.
4.
IsmailH., TanS., and PohB.T.Curing and Mechanical Properties of Nitrile and Natural Rubber Blends. Journal of Elastomers and Plastics, 33, (2001) 251.
5.
AwangM., IsmailH., and HazizanM.A.Polypropylene-based blends containing waste tire dust: Effects of trans-polyoctylene rubber (TOR) and dynamic vulcanization. Polymer Testing, 26, (2007) 779–787.
6.
RahimanK.H., UnnikrishnanG., SujithA., and RadhakrishnanC.K.Cure characteristics and mechanical properties of styrene–butadiene rubber/acrylonitrile butadiene rubber. Materials Letters, 59, (2005) 633–639.
7.
IsmailH., and SupriA.G.Rheological behavior, tensile properties, morphology, and thermal stability of recycled poly(vinyl chloride)/acrylonitrile butadiene rubber (PVCr/NBR) blends: the effect of maleic acid. Journal of Elastomer and Plastics, 40, (2008) 113–126.
8.
El-NemrK.F.Effect of different curing systems on the mechanical and physic-chemical properties of acrylonitrile butadiene rubber vulcanizates. Materials and Design, 32, (2011) 3361–3369.
9.
RattanasomN., PrasertsriS., and RuangritnumchaiT.Comparison of the mechanical properties at similar hardness level of natural rubber filled with various reinforcing-fillers. Polymer Testing, 28, (2009) 8–12.
10.
IsmailH., NordinR., and NoorA.M.The comparison properties of recycle rubber powder, carbon black, and calcium carbonate filled natural rubber compounds. Polymer-Plastics Technology and Engineering, 41(5), (2002) 847–867.
11.
HassanM.M., BadwayN.A., GamalA.M., ElnaggarM.Y., and HegazyE.A.Effect of carbon black on the properties of irradiated recycled polyamide/rubber waste composites. Nuclear Instruments and Methods in Physics Research B, 268, (2010) 2527–2534.
12.
SekkarV., NarayanaswamyK., ScariahK.J., NairP.R., SastriK.S., and AngHow Ghee. Evaluation by various experimental approaches of the crosslink density of urethane networks based on hydroxyl-terminated polybutadiene. Journal of Applied Polymer Science, 103, (2007) 3129–3133.
13.
RattanasomN., PoonsukA., and MakmoonT.Effect of curing system on the mechanical properties and heat aging resistance of natural rubber/tire tread reclaimed rubber blends. Polymer Testing, 24, (2005) 728–732.
14.
IsmailH., NordinR., and NoorA.M.The effects of recycle rubber powder (RRP) content and various vulcanization systems on curing characteristics and mechanical properties of natural rubber/RRP blends. Iranian Polymer Journal, 12(5), (2003) 373–380.
15.
IsmailH., NordinR., and NoorA.M.The effect of filler loading on curing and mechanical properties of natural rubber/recycled rubber powder blends. International Journal of Polymeric Materials, 54, (2005) 9–20.
16.
IsmailH., NordinR., and NoorA.M.Cure characteristics, tensile properties and swelling behavior of recycled rubber powder-filled natural rubber compounds. Polymer Testing, 21, (2002) 565–569.
17.
IsmailH., GalpayaD., and AhmadZ.Comparison of properties of polypropylene (PP)/virgin acrylonitrile butadiene rubber (NBRv) and polypropylene (PP)/recycled acrylonitrile butadiene rubber (NBRr) blends. Polymer-Plastics Technology and Engineering, 48, (2009) 440–445.
18.
KumnuantipC., and SombatsompopN.Dynamic mechanical properties and swelling behaviour of NR/ reclaimed rubber blends. Materials Letters, 57, (2003) 3167–3174.
19.
IsmailH., GalpayaD., and AhmadZ.Effects of dynamic vulcanization on tensile properties, morphology and natural weathering of polypropylene/recycled acrylonitrile butadiene rubber (PP/NBRr) blends. Polymer-Plastics Technology and Engineering, 49, (2010) 110–119.
20.
ZulkepliN.N., IsmailH., and RashidA.Effects of different particle sizes of recycled acrylonitrile-butadiene rubber and its blend ratios on mechanical and morphological properties and curing characteristics of SBR/NBRr blends. Iranian Polymer Journal, 18(2), (2009) 139–148.
