A two dimensional beam model is proposed for delamination analysis of composite laminates, where Timoshenko's plane cross-section assumption is abandoned, and the longitudinal displacement of the beam is proposed as continuous functions of the transverse and the longitudinal coordinates, to match shear deformations. Moreover, the composite laminate is modeled as upper and lower sub-beam through the delamination interface, and corresponding conditions for interface sliding are satisfied through a generalized variational theory. The accuracy of the results of this analytical model is verified by comparison with those from three dimensional finite element models. Furthermore, the influences of delamination depth, length, central position and modulus mismatch ratio (E1/E2) of the upper and lower sublaminate to the energy release rate are discussed.
NishimuraA., and AotaniH., New fabric structures for composites. In: Recent Advances in Japan and the United States, Proceedings of Composites’ 86, Tokyo, Japan, June 1986. p. 29–36.
2.
SimitsesG.J., Delamination buckling of flat laminates. In: TurveyG J, MarshallI H, editors. Buckling and postbuckling of composite plates.London: Chapman and Hall, 1995. p. 299–328.
3.
AntonioM., and MiguelA.J., Application of the finite element method to prediction of onset of delamination growth, Appl. Mech. Rev., 55 (2002), 89–106.
4.
TayT.E., Characterization and analysis of delamination fracture in composites: an overview of developments from 1990 to 2001, Appl. Mech. Rev., 56 (2003), 1–32.
ChaiH., BabcockC.D., and KnaussW.G., One-dimensional modeling of failure in laminated plates by delamination buckling, Int. J. Solids Struct., 17 (1981), 1069–1083.
7.
SuoZ., and HutchinsonJ.W., Interface crack between two elastic layers, Int. J. Fract., 43 (1990), 1–18.
8.
SchaperyR.A., and DavidsonB.D., Prediction of energy release rate for mixed-mode delamination using classical plate theory, Appl. Mech. Rev., 43 (1990) S281–S287.
9.
WangJ.L., and QiaoP.Z., Interface crack between two shear deformable elastic layers, J. Mech. Phys. Solids, 52 (2004), 891–905.
10.
WangJ.L., and QiaoP.Z., Novel beam analysis of end notched flexure specimen for mode-II fracture, Eng. Fract. Mech., 71 (2004), 219–231.
11.
BrunoD., and GrecoF., Mixed mode delamination in plates: a refined approach, Int. J. Solids Struct., 38 (2001), 9149–9177.
12.
KardomateasG.A., and SchmueserD.W., Buckling and postbuckling of delaminated composites under compressive loads including transverse shear effects, AIAA J., 26 (1988), 337–343.
13.
ChenH.P., Shear deformation theory for compressive delamination buckling and growth, AIAA J, 29 (1991), 813–819.
14.
KyoungW.M., and KimC.G., Delamination buckling and growth of composite laminated plates with transverse shear deformation, J. Compos. Mater., 29 (1995), 2047–2068.
15.
GuH.Z., and ChattopadhyayA., A new higher-order plate theory in modeling delamination buckling of composites. In: 35th AIAA/ASME/ASCE/AHS/ASC Structures, Structural Dynamics and Materials Conference, Hilton Head, SC, April, 1994, p. 504–513.
16.
DavidJ.E., RodneyS.T., MinhQ.N., and MurrayL.S., Review of delamination predictive methods for low speed impact of composite laminates, Compos. Struct., 66 (2004), 677–683.
17.
TawkI., NavarroP., FerreroJ.F., BarrauJ.J., and AbdullahE., Composite delamination modelling using a multi-layered solid element, Compos. Sci. Technol., 70 (2010), 207–214.
18.
WashizuK., Variational methods in elasticity and plasticity, 2nd edition, Oxford: Pergamon Press, 1975.
19.
MengQ.C., and ZhangX., Analytical-variational and generalized weighted conservative integral method on solution of interfacial cracks with their applications to bi-metal glued joints, Eng. Fract. Mech., 52 (1995), 1127–1137.
20.
GriffithA.A., The phenomena of rupture and flow in solids, Phil. Trans. R. Soc. A, 221 (1920), 163–198.
21.
IrwinG.R., Fracture dynamics, fracturing of metals, Cleveland, OH, American Society for Metals, 1948, p. 147–166.
22.
MurakamiY., Stress intensity factors handbook, Pergamon press, 1986, p. 434.
