Non-destructive evaluation of strength and stiffness of Eucalyptus pellita. A comparison of near infrared spectroscopy and acoustic wave velocity assessment

Abstract

Tree improvement programmes benefit from measured data for multiple phenotypes in order to potentially gain maximum genetic leverage for selection. Diameter at breast height, tree height and tree form have traditionally dominated the measured phenotype due to their ease of measurement, and the fact that logs are traded by volume. More complex traits, including those that potentially offer economic benefit in terms of quality and end-product performance such as strength and stiffness, are more difficult to measure in standing trees and are frequently overlooked. These traits are therefore in need of rapid methods of assessment. Tree improvement of Eucalyptus pellita in Malaysian Borneo for solid wood and veneer product utilisation is one such example of where selection for improved stiffness is desirable. Genetic trials of E. pellita were assessed using acoustic velocity measurements at several intervention points, including the standing tree, fallen stem, logs and boards, along with near infrared spectroscopic measurement of the final test samples. Calibrations were developed for modulus of elasticity (MOE), modulus of rupture (MOR) and compression parallel to the grain, using reference values obtained from 3-point bending of small clearwood test samples obtained from the trees following felling and sawing to ensure back-to-log recovery of the test sample location. Dynamic MOE calculated from the standing tree acoustic velocity showed good correlation with the mean MOE from static bending for the wood in the butt log, representing the location where standing tree acoustic velocity measurements were obtained. The Savitzky-Golay second derivative pre-treatment yields the best performing calibration for the microNIR and MPA on ground wood for MOE (R²_Cal = 0.76, r²_CV = 0.80, r²_Pred = 0.46, RMSEC and RMSECV = 1.4 GPa, RMSEP = 2.3 GPa, LV = 3) for the microNIR and R²_Cal = 0.98, r²_CV and r²_Pred = 0.70, RMSEC = 0.5 GPa, RMSECV and RMSEP =1.5 GPa, LV = 4 for the MPA.

Keywords

Acoustic wave velocity Modulus of elasticity Modulus of rupture Near infrared spectroscopy

Get full access to this article

View all access options for this article.

References

Bodig

Jayne

. Mechanics of wood and wood composites. New York, NY: Van Nostrand Reinhold; 1982.

Nicholson

Hillis

Ditchburne

, et al. Some tree growth–wood property relationships of eucalypts. Can J For Res 1975; 5(3): 424–432.

Wimmer

Downes

Evans

, et al. Direct effects of wood characteristics of pulp and handsheet properties of Eucalyptus globulus. Holzforschung 2002; 56(3): 244–252.

Yang

J-L

Evans

. Prediction of MOE of eucalypt wood from microfibril angle and density. Holz Roh Werkst. 2003; 61: 449–452.

Huang

C-L

Lindstrom

Nakada

, et al. Cell wall structure and wood properties determined by acoustics––a selective review. Holz Roh Werkst 2003; 61(5): 321–335.

Innes

. Processing and wood properties of four ages of Eucalyptus obliqua. Holz Roh Werkst 2007; 65(3): 197–200.

Lachenbruch

Johnson

Downes

, et al. Relationships of density, microfibril angle, and sound velocity with stiffness and strength in mature wood of Douglas-fir. Can J For Res 2010; 40: 55–64.

Baar

Tippner

Rademacher

, et al. Prediction of mechanical properties - modulus of rupture and modulus of elasticity - of five tropical species by nondestructive methods. Maderas, Cienc Tecnol 2015; 17(2):23.

Rocha

MFV

Costa

, et al. Wood knots influence the modulus of elasticity and resistance to compression. Wood Sci Technol Floresta e Ambient 2018; 25(4): e20170906.

10.

Larson

. Auxin gradients and the regulation of cambial activity. In TT

Kozlowski

, editors. Tree Growth. New York, NY: Ronald Press; 1962.

11.

Gingras

Zhang

. Twig Tweaking: Timber Management for Wood Quality and End Product Value. Canadian Forest Industries; 1999.

12.

Leles

PSS

Reis

MGF

, et al. Relações hídricas e crescimento de árvores de Eucalyptus camaldulensis e Eucalyptus pellita sob diferentes espaçamentos na região de cerrado. Revista Árvore 1998; 22(1): 41–50.

13.

Harrington

Debell

, et al. Effects of planting, spacing and site quality on 25-year growth and mortality relationships of Douglas-fir (Pseudotsuga menziesii var. menziesii). For Ecol Man 2009; 258(1): 18–25.

14.

Malan

Hoon

. Effect of initial spacing and thinning on some wood properties of Eucalyptus grandis. South Afr For J 1992; 163: 13–20.

15.

Tong

Fleming

Tanguay

, et al. Wood and lumber properties from unthinned and precommercially thinned black spruce plantations. Wood Fib Sci 2009; 41(2): 168–179.

16.

Thomas

Henson

Joe

, et al. Review Growth and wood quality of plantation grown Eucalyptus dunnii. Austr For 2009; 72(1): 3–11.

17.

Vega

Hamilton

Downes

, et al. Radial variation in modulus of elasticity, microfibril angle and wood density of veneer logs from plantation-grown Eucalyptus nitens. Ann For Sci 2020; 77(3): 65.

18.

Lima

Biazzo

De Araujo

, et al. Mechanical properties evaluation of Eucalyptus grandis wood at three different heights by impulse excitation technique (IET). BioResourses 2018; 13(2): 3377–3385.

19.

Raymond

. Genetics of eucalyptus wood properties. Ann For Sci 2002; 59(5–6): 525–531.

20.

Hein

PRG

Chaix

Clair

, et al. Spatial variation of wood density, stiffness and microfibril angle along Eucalyptus trunks grown under contrasting growth conditions. Trees 2016; 30: 871–882.

21.

Punches

. Tree Growth, Forest Management, and Their Implications for Wood Quality. Corvallis, OR: Pacific Northwest Extension; 2014.

22.

Wang

Ross

Carter

. Acoustic evaluation of standing trees: Recent research development. In Proceedings of the 14th International Symposium on Non-destructive Testing of Wood. Shaker Verlag; 2015.

23.

Legg

Bradley

. Measurement of stiffness of standing trees and felled logs using acoustics: A review. J Acoust Soc Am 2016; 139(2): 588–604.

24.

Tsuchikawa

Schwanninger

. A review of recent near infrared research for wood and paper (Part 2). Appl Spectrosc Rev 2013; 48: 560–587.

25.

Downes

Meder

Harwood

, et al. A multi-site, multi-species NIR calibration for the prediction of cellulose content in Eucalypt woodmeal. J Near Infrared Spectrosc 2010; 18(6): 381–387.

26.

Meder

Thumm

Marston

, et al. Sawmill trial of at-line prediction of recovered lumber stiffness by NIR spectroscopy of radiata pine cants. J Near Infrared Spectrosc 2003; 11(2): 137–143.

27.

Japarudin

Lapammu

Alwi

, et al. Growth performance of selected taxa as candidate species for productive tree plantations in Borneo. Austr For 2020; 38(1): 29–38.

28.

Japarudin

Meder

Chiu

K-C

, et al. Veneering and sawing performance of plantation-grown Eucalyptus pellita, aged 7-23 years, in Borneo Malaysia. Int Wood Prod J 2021;12(2): 116–127.

29.

Japarudin

Meder

Lapammu

, et al. Compression and flexural properties of plantation-grown Eucalyptus pellita in Borneo, Malaysia. Potential for structural timber end use. Austr For 2021; 84(3): 139–151.

30.

Bucur

. Acoustics of Wood. Springer Series in Wood Science, 2nd edn. New York, NY: Springer, 2006.

31.

Sandak

Meder

. Assessing trees, wood and derived products with near infrared spectroscopy: Hints and tips. J Near Infrared Spectrosc 2016; 24(6): 485–505.

32.

Savitzky

Golay

MJE

. Smoothing and differentiation of data by simplified least squares procedures. Anal Chem 1964; 36(8): 1627–1639.

33.

Martens

Jensen

Geladi

. Multivariate linearity transformations for near infrared reflectance spectroscopy. In OHJ

Christie

, editor. Proceedings of the Nordic Symposium on Applied Statistics. Stavanger: Stokkland Forlag, 1983.

34.

Geladi

MacDougall

Martens

, et al. Linearization and scatter-correction for NIR reflectance spectra of meat. Appl Spectrosc 1985; 39: 491–500.

35.

Kennard

Stone

. Computer aided design of experiments. Technometrics 1969; 11(1): 137–148.

36.

Wang

Verrill

Lowell

, et al. Acoustic sorting models for log segregation. Wood Fib Sci 2013; 45: 343–352.

37.

Raymond

Joe

Anderson

, et al. Effect of thinning on relationships between three measures of wood stiffness in Pinus radiata: standing vs. logs vs. short clear specimens. Can J For Res 2008; 38: 2870–2879.

38.

Grabianowski

Manley

Walker

JCF

, et al. Acoustic measurements on standing trees, logs and green lumber. Wood Sci Technol 2006; 40: 205–216.

39.

Wang

Carter

. Acoustic evaluation of wood quality in standing trees. Part I. Acoustic wave behavior. Wood Fib Sci 2007; 39: 28–38.

40.

Amishev

Murphy

. In-forest assessment of veneer grade Douglas-fir logs based on acoustic measurement of wood stiffness. For Prod J 2008; 58(11): 42–47.

41.

Thumm

Meder

. Stiffness prediction of radiata pine clearwood test pieces using near infrared spectroscopy. J Near Infrared Spectrosc 2001; 9: 117–122.

42.

Schwanninger

Rodrigues

Fackler

. A review of band assignments in near infrared spectra of wood and wood components. J Near Infrared Spectrosc 2011; 19: 287–308.

43.

Workman

Weyer

. Practical Guide and Spectral Atlas for Interpretative Near-Infrared Spectroscopy. Boca Raton, MA: CRC Press, Taylor & Francis, 2012.

44.

Meder

. The magnitude of tree breeding and the role of near infrared spectroscopy. NIR News. 2015; 26(3): 8–10.