Influence of internally reflected sunlight on the visibility of vehicle direction indicators with clear lenses

Abstract

There is some concern that vehicle direction indicator lamps with clear outer lenses make it difficult in bright, sunny conditions to decide whether the signal is on or not. This study photometrically evaluated, under bright, sunny conditions, both luminance contrast and colour contrast between the on and off states for direction indicator lamps that use either an amber lens or a dear lens. The results indicate that luminance contrast between the on and off states is greater for lamps using an amber lens. On the other hand, the results indicate that colour contrast between the on and off states is greater for lamps using a clear lens. Because luminance contrast is likely to be the primary variable influencing driver performance, these results suggest that using clear-lens direction indicators is likely to make it more difficult to determine, in bright, sunny conditions, whether the signal is on or not. However, the magnitude of the decrement in real-world performance with dear-lens signal lamps remains to be ascertained.

Get full access to this article

View all access options for this article.

References

Lighting handbook: reference and application 8th edition (New York: Illuminating Society of North America) (1993)

Wyszecki G. and Stiles G. Colour science: concepts and methods, quantitative data and fomulae 2nd edition (New York: Wiley) (1982)

Dawson H (ed.) The eye voL 2A (New York: Academic Press) (1976)

Coren S. , Porac C. and Ward L.M. Sensation and perception (New York: Academic Press) (1979)

Teghtsoonian R.

On the experiment in Stevens' Law and the constant in Ekman's Law

Psychol. Rev. 78 71-80 (1971)

Adrian W. (1993) The physiological basis of the visibility concept Proceedings of the 2nd International Symposium on Visibility and Luminance in Roadway Lighting (New York : Lighting Research Institute) pp17-30 (1993)

Huey R. , Dekker D. and Lyons R. Driver perception of just-noticeable differences of automotive signal lamp intensities Report DOT HS 808 209 (Washington, DC : National Highway Traffic Safety Administration) (1994)

Society of Automotive Engineers Standard J588 : Turn signal lamps for use on motor vehicles less than 2032 mm in overall width (Warrendale, PA: Society of Automotive Engineers) (1994)

Federal Motor Vehicle Safety Standard 108 : Lamps, reflective devices, and associated equipment Code of Federal Regulations Part 571.108 (Washington, DC: US Government Printing Office) (1996)