This article presents a force control solution for a throttle-free multi-pressure hydraulic cylinder actuator. A model-based force controller was developed and the position and velocity tracking control was implemented using low-order linear controllers. Special attention was paid to robustness against variations in the load mass, bulk modulus, and system delay. Experimental results demonstrated excellent energy efficiency and robustness, and acceptable tracking performance.
MattilaJKoivumäkiJCaldwellDet al. A survey on control of hydraulic robotic manipulators with projection to future trends. IEEE/ASME T Mechatron2017; 22: 669–680.
2.
KimWWonDTomizukaM. Flatness-based nonlinear control for position tracking of electrohydraulic systems. IEEE/ASME T Mechatron2015; 20: 197–206.
3.
KoivumäkiJMattilaJ. High performance nonlinear motion/force controller design for redundant hydraulic construction crane automation. Automat Constr2015; 51: 59–77.
4.
WonDKimWShinDet al. High-gain disturbance observer-based backstepping control with output tracking error constraint for electro-hydraulic systems. IEEE T Contr Syst T2015; 23: 787–795.
5.
LinjamaMHuovaMHuhtalaK. Model-based force and position tracking control of an asymmetric cylinder with a digital hydraulic valve. Int J Fluid Power2016; 17(3): 163–172.
6.
LinjamaMHuovaMKarhuOet al. High-performance digital hydraulic tracking control of a mobile boom mockup. In: 10th international fluid power conference, Dresden, 8–10 March 2016, paper no. A-1, 12pp. Dresden: Technische Universität Dresden.
7.
ErikssonBPalmbergJ-O. Individual metering fluid power systems: challenges and opportunities. Proc IMechE, Part I: J Systems and Control Engineering2011; 225(2): 196–211.
8.
LinjamaMVihtanenH-PSipolaAet al. Secondary controlled multi-chamber hydraulic cylinder. In: 11th Scandinavian international conference on fluid power, Linköping, 2–4 June 2009, 15pp. Linköping: Linköping University.
9.
HuovaMLaamanenALinjamaM. Energy efficiency of three-chamber cylinder with digital valve system. Int J Fluid Power2010; 11(3): 15–22.
10.
HeemskerkEBonefeldRBuschmannH. Control of a semi-binary hydraulic four-chamber cylinder. In: 14th Scandinavian international conference on fluid power, Tampere, 20–22 May 2015, 12pp. Tampere: Tampere University of Technology.
11.
LumkesJAndruchJIII. Hydraulic circuit for reconfigurable and efficient fluid power systems. In: 12th Scandinavian international conference on fluid power, Tampere, 18–20 May 2011, pp.83–98, vol. 2. Tampere: Tampere University of Technology.
12.
KetonenMLinjamaMHuhtalaK. Retrofitting digital hydraulics – an analytical study. In: 9th international fluid power conference, Aachen, 24–26 March 2014, 6pp. Aachen: RWTH Aachen University.
13.
VukovicMLeifeldRMurrenhoffH. STEAM – a hydraulic hybrid architecture for excavators. In: 10th international fluid power conference, Dresden, 8–10 March 2016, paper no. 10-1, 12pp. Dresden: Technische Universität Dresden.
14.
LinjamaMHuovaMPietolaMet al. Hydraulic hybrid actuator: theoretical aspects and solution alternatives. In: 14th Scandinavian international conference on fluid power, Tampere, 20–22 May 2015, 11pp. Tampere: Tampere University of Technology.
15.
HuovaMAaltoALinjamaMet al. Digital hydraulic multi-pressure actuator: the concept, simulation study and first experimental results. Int J Fluid Power2017; 18(3): 141–152.
16.
HuovaMAaltoALinjamaMet al. Study of energy losses in digital hydraulic multi-pressure actuator. In: 15th Scandinavian international conference on fluid power, Linköping, 7–9 June 2017, 10pp. Linköping: Linköping University.
17.
GreenMLimebeerD. Linear robust control. Englewood Cliffs, NJ: Prentice Hall, 1995.
18.
HarrisonAJLStotenDP. Generalized finite difference methods for optimal estimation of derivatives in real-time control problems. Proc IMechE, Part I: J Systems and Control Engineering1995; 209(2): 67–78.
19.
LinjamaMHuovaMBostömPet al. Design and implementation of energy saving digital hydraulic control system. In: 10th Scandinavian international conference on fluid power, Tampere, 21–23 May 2007; pp.341–359, vol. 2. Tampere: Tampere University of Technology.
