Linear motion control with a low-power hydraulic switching converter

Abstract

Switching control can be employed for hydraulic motion control. Among the many hydraulic switching methods investigated so far, the so-called hydraulic buck converter convinces by its simplicity. It consists of two switching valves, an inertance pipe, and a hydraulic accumulator to flatten the pulsation resulting from switching. This accumulator entails significant softness and nonlinearity which, in combination with sealing friction of the hydraulic cylinder, may lead to inferior performance with simple control concepts. In this paper a sub-kilowatt hydraulic buck converter, its components, design, dimensioning, and steady-state performance characteristics are presented first. Measurements on a testrig for linear motion employing a simple P-controller show the necessity of a model-based control to achieve the desired control performance. Therefore, a dynamic model of the converter and the linear drive is derived and studied by simulations. It is shown that the model incorporates the relevant physical effects and that it is qualified for a flatness-based control, which is derived in Part II of the publication.

Keywords

Hydraulics buck converter switching control energy efficiency

Get full access to this article

View all access options for this article.

References

Brown

. Switched reactance hydraulics: a new way to control fluid power. In National conference on fluid power, pp. 25–33.

Brown

Tentarelli

Ramachandran

. A hydraulic rotary switched-inertance servo transformer. ASME J Dynam Syst Meas Control 1988; 110(2): 144–150.

Gall

Senn

. Freilaufventile - Ansteuerungskonzept zur Energieeinsparung bei hydraulischen Linearantrieben. Ölhydraulik Pneumatik 1994; 38: 1–2.

Scheidl

Lail

ASAE

Schindler

. On fluid power control by switching techniques. In Acar

Penney

(eds.) Joint Hungarian–British international mechatronics conference, 21–23 September, Budapest. Southampton: Computational Mechanics Publishers, pp. 551–556.

Scheidl

Schindler

Riha

. Basics for the energy-efficient control of hydraulic drives by switching techniques. In Lückel

(ed.) Proceedings of the 3rd conference on mechatronics and robots.

Scheidl

Riha

. Energy efficient switching control by a hydraulic resonance converter. In Burrows

Edge

(eds.) Proceedings of the workshop on power transmission and motion control (PTMC’99), 8–11 September, Bath, pp. 267–273.

Linjama

. Digital fluid power - state of the art. In 12th Scandinavian interational conference on fluid power (SICFP’11), 18–20 May, Tampere, Finland, volume 2(4).

Johnston

. A switched inertance device for efficient control of pressure and flow. In ASME 2009 dynamic systems and control conference, Hollywood, California.

Wang

Kudzma

Johnston

. The influence of wave effects on digital switching valve performance. In The 4th workshop on digital fluid power, 21–22 September, Linz, Austria, pp. 10–25.

10.

Pan

Johnston

Hillis

. Active control of pressure pulsation in a switched inertance hydraulic system. Proc IMechE I: J Syst Control Eng 2013; 227(7): 610–620.

11.

Scheidl

Manhartsgruber

Kogler

. The hydraulic buck converter - concept and experimental results. In Proceedings of the 6th international fluid power conference. Dresden: IFK.

12.

Kogler

Scheidl

. The hydraulic buck converter exploiting the load capacitance. In 8th IFK - “Fluid Power Drives”, 26–28th March, Dresden, Germany.

13.

Kogler

Scheidl

Ehrentraut

. A compact hydraulic switching converter for robotics applications. In Proceedings of the Bath/ASME symposium on fluid power and motion control (FPMC2010), 11–17 September, Bath, UK.

14.

Guglielmino

Semini

Kogler

. Power hydraulics - switched mode control of hydraulic actuation. In Proceedings of the 2010 IEEE/RSJ international conference on intelligent robots and systems (IROS 2010), 18–22 October, Taipei, Taiwan.

15.

Peng

Kogler

Guglielmino

. The use of a hydraulic DC–DC converter in the actuation of a robotic leg. In International conference on intelligent robots and systems (IROS 2013), 3–8 November, Tokyo Big Sight, Japan.

16.

Ehrentraut

. Auslegung und Realisierung eines kompakten energieeffizienten hydraulischen Antriebes für kleine Leistungen. Master’s Thesis, Institute of Machine Design and Hydraulic Drives, Johannes Kepler University, Linz, 2010.

17.

Leati

Plöckinger

Scheidl

. A simulation study of valve timing problems of an electrically actuated high frequency oscillating pump. In 7th FPNI PhD symposium on fluid power, 27–30 June, Reggio Emilia, Italy, pp. 853–866.

18.

Yamamoto

Aribowo

Hayamizu

. Visualization of the helical pipe flow. Fluid Dynam Res 2002; 30: 251–267.

19.

Kogler

. The Hydraulic Buck Converter - Conceptual Study and Experiments. PhD Thesis, Johannes Kepler University, Linz, Austria, 2012.

20.

Plöckinger

Scheidl

Winkler

. Development and prototyping of a compact, fast 3/2 way switching valve with integrated onboard electronics. In Proceedings of the 11th Scandinavian international conference on fluid power (SICFP’09), 2–4 June, Linköping, Sweden.

21.

Kogler

Scheidl

. A simulation model of a hydraulic buck converter based on a mixed time frequency domain iteration. In ASME/BATH 2013 symposium on fluid power and motion control (FPMC2013), 6–9 October, Sarasota, FL.

22.

Fliess

Join

. Model-free control. Int J Control 2013; 86(12): 2228–2252.

23.

Armstrong-Hélouvry

. Control of Machines with Friction. Kluwer Academic Publishers, 1991.

Linear motion control with a low-power hydraulic switching converter - Part I: Concept,test rig,simulations

Abstract

Keywords

Get full access to this article

References