The main objective of our research project was to design an electro-pneumatic servo-drive positioning control system, which involved applying a fuzzy logic controller. A proportional–derivative fuzzy logic controller was selected to perform position changeover, follow-up, and teach/playback control. These methods of control are essential in automation equipment, such as pick-and-place machines, manipulators, and robots. Compared to the smart positioning controller SPC200, the proportional–derivative fuzzy logic controller demonstrated superior accuracy required for industrial pneumatic manipulators.
SitumZPavkovicDNovakovicB. Servo pneumatic position control using fuzzy PID gain scheduling. J Dyn Syst-T ASME2004; 126(2): 376–387.
2.
BlasiakSKunderaCz. An analysis of heat transfer in non-contacting face seals with modified surfaces of sliding rings. In: AdamczakSOsannaPH (eds) Science report, project Pl-0007, CEEPUS, Kielce University of Technology, 2008, pp.47–52.
3.
WangYTWongRHLiuCY. A parallel stereo vision-based 3D pneumatic arm. T I Meas Control2011; 33(5): 542–557.
4.
WangYTWongRHLoJH. CCD-based two-dimensional pneumatic arm control system. Proc IMechE, Part I: J. Systems and Control Engineering2009; 223(5): 585–590.
5.
TakosogluJEDindorfRFLaskiPA. Fuzzy logic positioning system of electro-pneumatic servo-drive. In: JimenezAAl HadithiBM (eds) Robot manipulators, trends and development. Croatia: In-Tech, 2010, pp.298–320.
6.
CarneiroJFDe AlmeidaFG. A high-accuracy trajectory following controller for pneumatic devices. Int J Adv Manuf Tech2011; 61(1–4): 253–267.
7.
SchulteHHahnH. Fuzzy state feedback gain scheduling control of servo-pneumatic actuators. Control Eng Pract2004; 12: 639–650.
8.
TakosogluJDindorfRLaskiP. Positioning of electro-pneumatic servo-drive with direct displacement and velocity transducer. Acta Mech Autom2010; 4(1): 86–91.
9.
TakosogluJEDindorfRFLaskiPA. Rapid prototyping of fuzzy controller pneumatic servo-system. Int J Adv Manuf Tech2009; 40(3–4): 349–361.
10.
BucherRBalemiS. Rapid controller prototyping with Matlab/Simulink and Linux. Control Eng Pract2006; 14: 185–192.
11.
DzierzekK. The digital system of the position measurement. Sol St Phen2009; 147–149: 936–941.
12.
DriankovDHellendoornHReinfrankM. An introduction to fuzzy control. Warsaw: WNT, 1996.
YagerRRFilevDP. Essentials of fuzzy modeling and control. Warsaw: WNT, 1994.
15.
LaskiPA. Research into kinematic and dynamic properties of multiaxial electro-pneumatic manipulator of Stewart platform structure. Dissertation, Kielce University of Technology, Kielce, Poland, 2005.
16.
TakosogluJ. Analysis and synthesis of pneumatic multi-axis servo-drive control system using fuzzy controller. Dissertation, Kielce University of Technology, Kielce, Poland, 2005.
