Sage Journals: Discover world-class research

Abstract

This paper describes a type of mobile robot with a spherical shape designed to act as a platform to carry sensing devices or actuators in an environment where the conditions are harsh and the stability of the mechanical platform is critical. A remotely controlled internal unit drives the spherical robot. The paper focuses on the design and motion control of a robot with a spherical shape. The developed control modules are implemented in digital programmable logic devices, using a hardware description language named VHDL. The digital hardware controls multiple devices: a multichannel analogue-to-digital (A/D) converter, a pair of radio-frequency (RF) modules and four radio-controlled (R/C) servos. The robot motion is modelled by a configuration space function using the path curvature. The motion controller was designed to drive the robot to the desired path using control based on the path curvature. Because of the lack of a special steering mechanism, the robot steers only by controlling the displacement of its centre of gravity.

Keywords

spherical mobile robot remotely controlled control modules VHDL digital hardware

Get full access to this article

View all access options for this article.

References

Bhattacharya

Agrawal

S. K.

Design, experiments and motion planning of a spherical rolling robot. In Proceedings of the IEEE International Conference on

Robotics and Automation, San Francisco, California, April 2000, pp. 1207–1212.

Halme

Suomela

SchoUnberg

Wang

A spherical mobile micro-robot for scientific applications. Technical Report, Automation Technology Laboratory, Helsinki University of Technology, 1996.

Halme

SchoUnberg

Wang

Motion control of a spherical mobile robot. In 4th IEEE International Workshop on

Advanced Motion Control (AMC'96), Mie University, Japan, 1996.

Koshiyama

Yamafuji

Design and control of an all-direction steering type mobile robot. Int. J. Robotics Res., 1993, 12 (5), 411–419.

Marigo

Bicchi

Rolling bodies with regular surface: Controllability theory and application. IEEE Trans. Autom. Control, September 2000, 45 (9).

Canny

Motion of two rigid bodies with rolling constraint. IEEE Trans. Robotics and Automn, 1990, 6 (1), 62–72.

Brockett

Dai

Nonholonomic kinematics and the role of elliptic functions in constructive controllability. In Nonholonomic Motion Planning (Eds Li

Canny

J. F.

), 1993 (Norwell, Massachusetts and Kluwer, Dordrecht, The Netherlands).

Jurdjevic

The geometry of the plate-ball problem. Arch. Rational Mechanics and Analysis, 1993, 124, 305–328.

Mukherjeen

Das

Feedback stabilization of a spherical mobile robot. In Proceedings of International Conference on

Intelligent Robots and Systems (IROS 2002), Lausanne, Switzerland, October 2002.

10.

Ashenden

P. J.

VHDL Cookbook, 1st edition, 1990 (Department of Computer Science, University of Adelaide, South Australia, Australia).

11.

Craig

J. J.

Introduction to Robotics: Mechanics and Control, 2nd edition, 1986 (Addison-Wesley, Reading, Massachusetts).

12.

Paul

R. P.

Robot Manipulators: Mathematics, Programming, and Control, 1981 (The MIT Press, Cambridge, Massachusetts).

13.

Low-power, 8-channel, serial 12-bit ADCs MAX186/MAX188. Datasheet from the ADC used, Maxim Integrated Products, 1996.

14.

Kanayama

Y. J.

Fahroo

A new line tracking method for nonholonomic vehicles. In Proceedings of IEEE International Conference on

Robotics and Automation, Albuquerque, New Mexico, April 1997, Vol.4, pp. 2908–2911.

15.

K. W.

Path following of a single wheel robot. In Proceedings of IEEE International Conference on

Robotics and Automation, San Francisco, California, April 2000, pp. 2925–2930.

16.

Kolmanovsky

McClamroch

Developments in nonholonomic control problems. IEEE Control Systems Mag., December 1995, 15 (6), 20–36.

Design and control of a spherical mobile robot

Abstract

Abstract

Keywords

Get full access to this article

References