Bipolar plates play a crucial role in the performance and viability of proton exchange membrane fuel cells. Polymeric composites have demonstrated their potential as alternatives to graphite and metallic materials for bipolar plates due to their good corrosion resistance, lightweight nature, flexibility, and cost-effectiveness. However, these polymeric materials often suffer from low electrical conductivity. The incorporation of various electrically conducting fillers can improve the electrical conductivity of these materials. This work presents a comprehensive review of the utilization of polymeric materials-based composites for bipolar plates for proton exchange membrane fuel cells. Various aspects related to bipolar plates in proton exchange membrane fuel cells, including materials, fabrication techniques, applications, cost analysis, and the current status of proton exchange membrane fuel cells are discussed in this work. Both thermoplastic and thermoset-based composites are explored as matrix materials for bipolar plates, along with different conducting filler/reinforcement options, and their best results are also explored. The impact of traditional as well as emerging fabrication techniques on the performance of bipolar plates is evaluated, emphasizing the need to reduce the cost of bipolar plates for the commercialization of proton exchange membrane fuel cells. Furthermore, the paper also examines the applications and current status of proton exchange membrane fuel cells in India as well as worldwide.
ChenYPBashirSLiuJL. Nanostructured materials for next-generation energy storage and conversion: hydrogen production, storage, and utilization. Berlin Heidelberg: Springer, 2017. DOI: https://doi.org/10.1007/978-3-662-53514-1/COVER.
2.
Boehmer-ChristiansenS. Fuel for thought. Energy Environ2006; 17: 287–324.
3.
JeongK IlOhJSongSA, et al.A review of composite bipolar plates in proton exchange membrane fuel cells: electrical properties and gas permeability. Compos Struct2021; 262: 113617.
4.
KhanSSShareefHWahyudieA, et al.Influences of ambient conditions on the performance of proton exchange membrane fuel cell using various models. Energy Environ2019; 30: 1087–1110. DOI: https://doi.org/10.1177/0958305X18802775
5.
Boyaci SanFGTekinG. A review of thermoplastic composites for bipolar plate applications. Int J Energy Res2013; 37: 283–309.
WangYChenKSMishlerJ, et al.A review of polymer electrolyte membrane fuel cells: Technology, applications, and needs on fundamental research. Appl Energy2011; 88: 981–1007. DOI:https://doi.org/10.1016/j.apenergy.2010.09.030
8.
WangYRuiz DiazDFChenKS, et al.Materials, technological status, and fundamentals of PEM fuel cells—A review. Mater Today2020; 32: 178–203.
9.
PourrahmaniHSiavashiMYavarinasabA, et al.A review on the long-term performance of proton exchange membrane fuel cells: from degradation modeling to the effects of bipolar plates, sealings, and contaminants. Energies2022; 15(14): 5081. DOI: https://doi.org/10.3390/en15145081
10.
BorupRLKusogluANeyerlinKC, et al.Recent developments in catalyst-related PEM fuel cell durability. Curr Opin Electrochem2020; 21: 192–200.
11.
SongYZhangCLingCY, et al.Review on current research of materials, fabrication and application for bipolar plate in proton exchange membrane fuel cell. Int J Hydrogen Energy2020; 45: 29832–29847.
12.
LarminieJDicksA. Fuel cell systems explained: Second edition. Germany: Wiley, 2013. Epub ahead of print 2013. DOI: https://doi.org/10.1002/9781118878330.
13.
ReddyKJSudhakarN. ANFIS-MPPT control algorithm for a PEMFC system used in electric vehicle applications. Int J Hydrogen Energy2019; 44: 15355–15369.
14.
AbdeldjalilDNegrouBYoussefT, et al.Incorporating the best sizing and a new energy management approach into the fuel cell hybrid electric vehicle design. Energy Environ2023; 0(0): 00–00. DOI: https://doi.org/10.1177/0958305X231177743
15.
GadallaMZafarS. Analysis of a hydrogen fuel cell-PV power system for small UAV. Int J Hydrogen Energy2016; 41: 6422–6432.
16.
BallMWietschelM. The future of hydrogen – opportunities and challenges. Int J Hydrogen Energy2009; 34: 615–627.
17.
CoralliASarrufBJMDe MirandaPEV, et al.Fuel cells. In: Science and engineering of hydrogen-based energy technologies: hydrogen production and practical applications in energy generation. Cambridge, Massachusetts: Academic press, 2019, pp. 39–122.
18.
ElerianAFAbu-SaiedMAAbd-ElnaimGH, et al.Development of polymer electrolyte membrane based on poly(vinyl chloride)/graphene oxide modified with zirconium phosphate for fuel cell applications. J Polym Res2023; 30: 1–19.
19.
CindrellaLKannanAMLinJF, et al.Gas diffusion layer for proton exchange membrane fuel cells-A review. J Power Sources2009; 194: 146–160.
20.
QiuDYiPPengL, et al.Study on shape error effect of metallic bipolar plate on the GDL contact pressure distribution in proton exchange membrane fuel cell. Int J Hydrogen Energy2013; 38: 6762–6772.
21.
YuanXZWangHZhangJ, et al.Bipolar plates for PEM fuel cells-from materials to processing. J New Mater Electrochem Syst2005; 8: 257–267.
22.
TaherianR. A review of composite and metallic bipolar plates in proton exchange membrane fuel cell: Materials, fabrication, and material selection. J Power Sources2014; 265: 370–390.
23.
WangYSeoBWangB, et al.Fundamentals, materials, and machine learning of polymer electrolyte membrane fuel cell technology. Energy AI2020; 1: 100014. DOI: https://doi.org/10.1016/J.EGYAI.2020.100014
24.
HermannAChaudhuriTSpagnolP. Bipolar plates for PEM fuel cells: a review. Int J Hydrogen Energy2005; 30: 1297–1302.
25.
KhosraviH SAbbasQReichmannK. Electrochemical aspects of interconnect materials in PEMFCs. Int J Hydrogen Energy2021; 46: 35420–35447.
26.
PlanesEFlandinLAlberolaN. Polymer composites bipolar plates for PEMFCs. In: Energy procedia. Amsterdam: Elsevier Ltd, 2012, pp. 311–323.
27.
DarıcıkFTopcuAAydınK, et al.Carbon nanotube (CNT) modified carbon fiber/epoxy composite plates for the PEM fuel cell bipolar plate application. Int J Hydrogen Energy2023; 48: 1090–1106.
28.
MathewCNaina MohamedSDevanathanLS. A comprehensive review of current research on various materials used for developing composite bipolar plates in polymer electrolyte membrane fuel cells. Polym Compos2022; 43: 4100–4114.
29.
BanerjeeSPattnayekSKumarR, et al.Impact of graphite on thermomechanical, mechanical, thermal, electrical properties, and thermal conductivity of HDPE/copper composites. Fuel Cells2020; 20: 16–130. DOI: https://doi.org/10.1002/fuce.201900004
30.
KumarRKarKKDasguptaK. Static and dynamic mechanical analysis of graphite flake filled phenolic-carbon fabric composites and their correlation with interfacial interaction parameters. Polym Eng Sci2017; 58: 1987–1998. DOI: https://doi.org/10.1002/pen.24809
31.
PozioAZazaFMasciA, et al.Bipolar plate materials for PEMFCs: A conductivity and stability study. J Power Sources2008; 179: 631–639.
Hydrogen Storage Technologies Roadmap Fuel Cell Technical Team Roadmap, www.uscar.org. (2013, accessed 4 August 2023).
34.
Hydrogen Storage Technologies Roadmap Fuel Cell Technical Team Roadmap, www.uscar.org. (2017, accessed 4 August 2023).
35.
LinCHTsaiSY. An investigation of coated aluminium bipolar plates for PEMFC. Appl Energy2012; 100: 87–92. DOI: https://doi.org/10.1016/j.apenergy.2012.06.045
36.
HuangPChenZZhangJ, et al.Stainless steel bipolar plate fuel cell with different flow field structures prepared by laser additive manufacturing. Int J Heat Mass Transf2022; 183: 122186.
37.
ShiJZhangPHanY, et al.Investigation on electrochemical behavior and surface conductivity of titanium carbide modified Ti bipolar plate of PEMFC. Int J Hydrogen Energy2020; 45: 10050–10058.
38.
WangHCHouKHLuCE, et al.Investigation of electroplating trivalent Cr-C on copper alloy as bipolar plates with different current density in PEMFCS. ECS Meeting Abstracts2015; MA2015-01: 154.
39.
BauerAHärtelSAwiszusB. Manufacturing of metallic bipolar plate channels by rolling. J Manuf Mater Process2019; 3: 48.
40.
AdlooASadeghiMMasoomiM, et al.High performance polymeric bipolar plate based on polypropylene/graphite/graphene/nano-carbon black composites for PEM fuel cells. Renew Energy2016; 99: 867–874.
41.
PandeyAKKumarRKachhavahVS, et al.Mechanical and thermal behaviours of graphite flake-reinforced acrylonitrile-butadiene-styrene composites and their correlation with entanglement density, adhesion, reinforcement and: C factor. RSC Adv2016; 6: 50559–50571. DOI: https://doi.org/10.1039/c6ra09236e
42.
TangACrisciLBonvilleL, et al.An overview of bipolar plates in proton exchange membrane fuel cells. J Renew Sustain Energy2021; 13: 022701. DOI:https://doi.org/10.1063/5.0031447
43.
AntunesRADe OliveiraMCLEttG, et al.Carbon materials in composite bipolar plates for polymer electrolyte membrane fuel cells: a review of the main challenges to improve electrical performance. J Power Sources2011; 196: 2945–2961.
44.
MüllerAKauranenPVon GanskiA, et al.Injection moulding of graphite composite bipolar plates. J Power Sources2006; 154: 467–471.
45.
SantiagoÓRasoMANavarroE, et al.Selection of thermoplastic polymers for use as bipolar plates in direct methanol fuel cell applications. Mater Des2019; 183: 108148. DOI: https://doi.org/10.1016/j.matdes.2019.108148
46.
AkhtarMNSulongABUmerA, et al.Multi-component MWCNT/NG/EP-based bipolar plates with enhanced mechanical and electrical characteristics fabricated by compression moulding. Ceram Int2018; 44: 14457–14464.
47.
MighriFHuneaultMAChampagneMF. Electrically conductive thermoplastic blends for injection and compression molding of bipolar plates in the fuel cell application. Polym Eng Sci2004; 44: 1755–1765.
YadavAKBanerjeeSKumarR, et al.Mechanical analysis of nickel particle-coated carbon fiber-reinforced epoxy composites for advanced structural applications. ACS Appl Nano Mater2018; 1: 4332–4339. DOI: https://doi.org/10.1021/acsanm.8b01193
50.
Mohd RadzuanNASulongABSomaluMR, et al.Fibre orientation effect on polypropylene/milled carbon fiber composites in the presence of carbon nanotubes or graphene as a secondary filler: application on PEM fuel cell bipolar plate. Int J Hydrogen Energy2019; 44: 30618–30626.
51.
Lopes De OliveiraMCSayegIJEttG, et al.Corrosion behavior of polyphenylene sulfide–carbon black–graphite composites for bipolar plates of polymer electrolyte membrane fuel cells. Int J Hydrogen Energy2014; 39: 16405–16418.
52.
KumarRVarshneySKarKK, et al.Fabrication and characterization of eco-friendly human-hair derived porous carbon-filled carbon fabric-reinforced polymer composites. Polym Compos2019; 40: E1573–E1587. DOI: https://doi.org/10.1002/pc.25078
53.
RaunijaTSKGautamRKBhradwajVM, et al.Low cost and rapidly processed randomly oriented carbon/carbon composite bipolar plate for PEM fuel cell. Fuel Cells2016; 16: 801–809. DOI: https://doi.org/10.1002/fuce.201600079
54.
MehtaVCooperJS. Review and analysis of PEM fuel cell design and manufacturing. J Power Sources2003; 114: 32–53.
55.
WangXQuZYangH, et al.Collective enhancements on thermal-electrical and mechanical properties of graphite-based composite bipolar plates through the coupled manipulations of molding and impregnation pressures. Membranes (Basel)2022; 12: 222–235. DOI: https://doi.org/10.3390/membranes12020222
56.
SimaafrookhtehSTaherianRShakeriM. Stochastic microstructure reconstruction of a binder/carbon fiber/expanded graphite carbon fiber paper for PEMFCs applications: Mass transport and conductivity properties. J Electrochem Soc2019; 166: F3287–F3299.
57.
KumarRKarKKDasguptaK. Superior electrical, mechanical and viscoelastic properties of CNTs coated carbon textile reinforced phenolic composite for high-performance structural applications. J Appl Polym Sci2021; 138(10): 49968. DOI:https://doi.org/10.1002/app.49968
58.
PalRJhaAKAkhtarMJ, et al.Enhanced microwave processing of epoxy nanocomposites using carbon black powders. Adv Powder Technol2017; 28: 1281–1290. DOI:https://doi.org/10.1016/j.apt.2017.02.016
59.
TawfikHHungYMahajanD. Metal bipolar plates for PEM fuel cell—A review. J Power Sources2007; 163: 755–767.
60.
KumarRVarshneySKarKK, et al.Enhanced thermo-mechanical and electrical properties of carbon-carbon composites using human hair derived carbon powder as reinforcing filler. Adv Powder Technol2018; 29: 1417–1432. DOI: https://doi.org/10.1016/j.apt.2018.03.004
61.
KumarRKarKKDasguptaK. Enhanced electrical, mechanical, and viscoelastic properties of carbon-carbon composites using carbon nanotubes coated carbon textile as reinforcement. J Compos Mater2021; 55: 1733–1748. DOI: https://doi.org/10.1177/0021998320978517
62.
VermaVSharmaC. Fatigue behavior of epoxy alumina nanocomposite—role of particle morphology. Theor Appl Fract Mech2020; 110: 102807.
63.
VermaVSayyedAHMSharmaC, et al.Tensile and fracture properties of epoxy alumina composite: Role of particle size and morphology. J Polym Res2020; 27: 1–14.
64.
VadivelanMRDrRaviSKumarDrS, et al.Composite and different metallic bi-polar plates in proton exchange membrane (PEM) fuel cells: materials, fabrication, platings and material selection for fuel cells—a review. IOSR J Appl Chem2016; 09: 79–106.
65.
YeetsornRPrissanaroon-OuajaiWOnyuK. Assessment of surface resistance reduction on polypyrrole-coated composite bipolar plates. J Polym Res2020; 27: 1–14.
66.
NguyenLMighriFDeyrailY, et al.Conductive materials for proton exchange membrane fuel cell bipolar plates made from PVDF, PET and co-continuous PVDF/PET filled with carbon additives. Fuel Cells2010; 10: 938–948.
67.
HuangXSongXXieW, et al.Ion exchange bipolar membrane: poly(ether ether ketone) grafting poly(2-(N,N-dimethylaminoethyl) methacrylate) synthesized via ATRP. J Polym Res2015; 22: 1–9.
68.
HickmannTZielinskiO. Bipolar plates: different materials and processing methods for their usage in fuel cells. In: E3S Web of Conferences, 2020. EDP Sciences. Epub ahead of print 25 March 2020. DOI: https://doi.org/10.1051/e3sconf/202016001002.
69.
HuangJBairdDGMcGrathJE. Development of fuel cell bipolar plates from graphite filled wet-lay thermoplastic composite materials. J Power Sources2005; 150: 110–119.
70.
YangGYuSMoJ, et al.Bipolar plate development with additive manufacturing and protective coating for durable and high-efficiency hydrogen production. J Power Sources2018; 396: 590–598.
71.
DweiriRSahariJ. Electrical properties of carbon-based polypropylene composites for bipolar plates in polymer electrolyte membrane fuel cell (PEMFC). J Power Sources2007; 171: 424–432.
72.
DazaLAcostaJLOjedaMC, et al.New polymer bipolar plates for polymer electrolyte membrane fuel cells: synthesis and characterization. J Appl Polym Sci2002; 83: 2817–2822.
73.
LiaoSHYenCYWengCC, et al.Preparation and properties of carbon nanotube/polypropylene nanocomposite bipolar plates for polymer electrolyte membrane fuel cells. J Power Sources2008; 185: 1225–1232.
74.
El AchabyMArrakhizFEVaudreuilS, et al.Mechanical, thermal, and rheological properties of graphene-based polypropylene nanocomposites prepared by melt mixing. Polym Compos2012; 33: 733–744. DOI: https://doi.org/10.1002/pc.22198
75.
JiangXDrzalLT. Exploring the potential of exfoliated graphene nanoplatelets as the conductive filler in polymeric nanocomposites for bipolar plates. J Power Sources2012; 218: 297–306.
76.
CunninghamBDBairdDG. Development of bipolar plates for fuel cells from graphite filled wet-lay material and a compatible thermoplastic laminate skin layer. J Power Sources2007; 168: 418–425.
77.
YangTShiP. Study on the mesocarbon microbeads/polyphenylene sulfide composite bipolar plates applied for proton exchange membrane fuel cells. J Power Sources2008; 175: 390–396.
78.
WuMShawLL. A novel concept of carbon-filled polymer blends for applications in PEM fuel cell bipolar plates. Int J Hydrogen Energy2005; 30: 373–380.
79.
BinZBingchuMChunhuiS, et al.Study on the electrical and mechanical properties of polyvinylidene fluroide/titanium silicon carbide composite bipolar plates. J Power Sources2006; 161: 997–1001.
80.
LiWZengHPengT, et al.A high conductive composite bipolar plate with conductive network constructed by chemical vapor deposition. Energies (Basel)2022; 15: 4979–4994. DOI: https://doi.org/10.3390/en15144979
81.
LeeMHKimHYOhSM, et al.Structural optimization of graphite for high-performance fluorinated ethylene–propylene composites as bipolar plates. Int J Hydrogen Energy2018; 43: 21918–21927.
82.
GautamRKBanerjeeSKarKK. Bipolar plate materials for proton exchange membrane fuel cell application. Recent Patents Mater Sci2015; 8: 15–45.
83.
KakatiBKDekaD. Differences in physico-mechanical behaviors of resol(e) and novolac type phenolic resin based composite bipolar plate for proton exchange membrane (PEM) fuel cell. Electrochim Acta2007; 52: 7330–7336.
84.
SimaafrookhtehSKhorshidianMMomenifarM. Fabrication of multi-filler thermoset-based composite bipolar plates for PEMFCs applications: molding defects and properties characterizations. Int J Hydrogen Energy2020; 45: 14119–14132.
85.
TaherianRHadianfardMJGolikandAN. Manufacture of a polymer-based carbon nanocomposite as bipolar plate of proton exchange membrane fuel cells. Mater Des2013; 49: 242–251.
86.
KakatiBKGhoshAVermaA. Efficient composite bipolar plate reinforced with carbon fiber and graphene for proton exchange membrane fuel cell. Int J Hydrogen Energy2013; 38: 9362–9369.
87.
KakatiBKSathiyamoorthyDVermaA. Electrochemical and mechanical behavior of carbon composite bipolar plate for fuel cell. Int J Hydrogen Energy2010; 35: 4185–4194.
88.
HeoSIOhKSYunJC, et al.Development of preform moulding technique using expanded graphite for proton exchange membrane fuel cell bipolar plates. J Power Sources2007; 171: 396–403.
89.
KangKParkSJuH. Effects of type of graphite conductive filler on the performance of a composite bipolar plate for fuel cells. Solid State Ion2014; 262: 332–336.
90.
GautamRKKarKK. Synthesis and properties of highly conducting natural flake graphite/phenolic resin composite bipolar plates for PEM fuel cells. Adv Compos Lett2016; 25: 87–97.
91.
YaoKAdamsDHaoA, et al.Highly conductive and strong graphite-phenolic resin composite for bipolar plate applications. Energy Fuels2017; 31: 14320–14331.
92.
GuoNLeuMC. Effect of different graphite materials on the electrical conductivity and flexural strength of bipolar plates fabricated using selective laser sintering. Int J Hydrogen Energy2012; 37: 3558–3566.
93.
LeeJHJangYKHongCE, et al.Effect of carbon fillers on properties of polymer composite bipolar plates of fuel cells. J Power Sources2009; 193: 523–529.
94.
DuCMingPHouM, et al.Preparation and properties of thin epoxy/compressed expanded graphite composite bipolar plates for proton exchange membrane fuel cells. J Power Sources2010; 195: 794–800.
95.
Rafi-Ud-DinArshadMSaleemA, et al.Fabrication and characterization of bipolar plates of vinyl ester resin/graphite-based composite for polymer electrolyte membrane fuel cells. J Thermoplast Compos Mater2016; 29: 1315–1331. DOI: https://doi.org/10.1177/0892705714563124
96.
MathewCMohamedSNSingaraveluDL. Novel copper fiber-filled polymer composites for enhancing the properties of bipolar plates for polymer electrolyte membrane fuel cells. Int J Hydrogen Energy2024; 52: 941–953.
97.
MathewCMohamedSNLenin SingaraveluD. Development of novel composite bipolar plates using surface-modified conductive carbon filler materials for polymer electrolyte membrane fuel cells. J Appl Polym Sci2023; 140(43): E54584. DOI: https://doi.org/10.1002/APP.54584
98.
BhosaleACRengaswamyR. Interfacial contact resistance in polymer electrolyte membrane fuel cells: Recent developments and challenges. Renewable Sustainable Energy Rev2019; 115: 109351. DOI: https://doi.org/10.1016/J.RSER.2019.109351
99.
YeetsornRFowlerMWTzoganakisC. A review of thermoplastic composites for bipolar plate materials in PEM fuel cells. In: Nanocomposites with unique properties and applications in medicine and industry. Intech Open, 2011. DOI: https://doi.org/10.5772/19262.
100.
RasakiSALiuCLaoC, et al.The innovative contribution of additive manufacturing towards revolutionizing fuel cell fabrication for clean energy generation: a comprehensive review. Renewable Sustainable Energy Rev2021; 148: 111369.
101.
Boyacı SanFGOkurO. The effect of compression molding parameters on the electrical and physical properties of polymer composite bipolar plates. Int J Hydrogen Energy2017; 42: 23054–23069.
102.
LiKCZhangKWuG. Fabrication of electrically conductive polymer composites for bipolar plate by two-step compression molding technique. J Appl Polym Sci2013; 130: 2296–2302.
103.
OhMHYoonYSParkSG. The electrical and physical properties of alternative material bipolar plate for PEM fuel cell system. Electrochim Acta2004; 50: 777–780.
104.
LiWJingSWangS, et al.Experimental investigation of expanded graphite/phenolic resin composite bipolar plate. Int J Hydrogen Energy2016; 41: 16240–16246.
105.
ChaiwanPPumchusakJ. Wet vs. Dry dispersion methods for multiwall carbon nanotubes in the high graphite content phenolic resin composites for use as bipolar plate application. Electrochim Acta2015; 158: 1–6.
106.
MathurRBDhakateSRGuptaDK, et al.Effect of different carbon fillers on the properties of graphite composite bipolar plate. J Mater Process Technol2008; 203: 184–192.
107.
LuoBHuMLiF, et al.A novel material fabrication method for the PEM fuel cell bipolar plate. Int J Hydrogen Energy2010; 35: 2643–2647.
108.
HamiltonPJPolletBG. Polymer electrolyte membrane fuel cell (PEMFC) flow field plate: Design, materials and characterisation. Fuel Cells2010; 10: 489–509.
109.
WuMShawLL. On the improved properties of injection-molded, carbon nanotube-filled PET/PVDF blends. J Power Sources2004; 136: 37–44.
110.
WuSDChiouAH. The study on a new method of preparing PMMA forming composite bipolar plate. Sci Rep2021; 11: 8753–8764. DOI: https://doi.org/10.1038/s41598-021-88235-2
111.
CausinVMaregaCMarigoA, et al.Morphological and structural characterization of polypropylene/conductive graphite nanocomposites. Eur Polym J2006; 42: 3153–3161.
112.
KatbabAAHrymakANKasmadjianK. Preparation of interfacially compatibilized PP-EPDM thermoplastic vulcanizate/graphite nanocomposites: Effects of graphite microstructure upon morphology, electrical conductivity, and melt rheology. J Appl Polym Sci2008; 107: 3425–3433.
113.
LiaoWJiangFZhangY, et al.Highly-conductive composite bipolar plate based on ternary carbon materials and its performance in redox flow batteries. Renew Energy2020; 152: 1310–1316.
114.
PhuangngamphanMOkhawilaiMHizirogluS, et al.Development of highly conductive graphite-/graphene-filled polybenzoxazine composites for bipolar plates in fuel cells. J Appl Polym Sci2018; 136: 47183. DOI: https://doi.org/10.1002/app.47183
115.
HuangJBairdDGMcGrathJE.Development of fuel cell bipolar plates from graphite filled wet-lay thermoplastic composite materials. J Power Sources2005; 150: 110–119.
116.
CelikSTimurkutlukBAydinU, et al.Development of titanium bipolar plates fabricated by additive manufacturing for PEM fuel cells in electric vehicles. Int J Hydrogen Energy2022; 47: 37956–37966.
117.
LeeCYTaylorACNattestadA, et al.3D Printing for electrocatalytic applications. Joule2019; 3: 1835–1849.
118.
HudkinsJRWheelerDGPeñaB, et al.Rapid prototyping of electrolyzer flow field plates. Energy Environ Sci2016; 9: 3417–3423.
119.
AlayavalliKBourellDL. Fabrication of modified graphite bipolar plates by indirect selective laser sintering (SLS) for direct methanol fuel cells. Rapid Prototyp J2010; 16: 268–274.
120.
VielstichWLammAGasteigerHA, et al. Handbook of fuel cells: Fundamentals, technology, and applications. United Kingdom: Wiley, 2003.
121.
ChatrattanawetNHakhenTKheawhomS, et al.Control structure design and robust model predictive control for controlling a proton exchange membrane fuel cell. J Clean Prod2017; 148: 934–947.
122.
DEVRİM Y, cell KP-, 2015 undefined. Analysis of a hybrid photovoltaic-electrolyzer-PEM fuel cell system for micro CHP. In: researchgate.net. 2015.
123.
Fuel Cells for Stationary Applications, www.etsap.org.
124.
WilberforceTAlaswadAPalumboA, et al.Advances in stationary and portable fuel cell applications. Int J Hydrogen Energy2016; 41: 16509–16522.
125.
VikramAChowdhuryPRPhillipsRK, et al.Measurement of effective bulk and contact resistance of gas diffusion layer under inhomogeneous compression—part I: electrical conductivity. J Power Sources2016; 320: 274–285.
126.
Sustainable Transport, Sustainable Development Interagency Report I Second Global Sustainable Transport Conference. United Nations, 2021.
127.
HuangYXiaoXKangH, et al.Thermal management of polymer electrolyte membrane fuel cells: a critical review of heat transfer mechanisms, cooling approaches, and advanced cooling techniques analysis. Energy Convers Manag2022; 254: 115221.
128.
Haghighat MamaghaniANajafiBCasalegnoA, et al.Optimization of an HT-PEM fuel cell based residential micro combined heat and power system: a multi-objective approach. J Clean Prod2018; 180: 126–138.
129.
myFC unveils the world’s thinnest fuel cell at CES in Las Vegas, www.myfcpower.com.
130.
LuCDMaoPZWenDH, et al.Study on the materials and forming process for bipolar plates of PEMFC. Key Eng Mater2013; 546: 164–175.
131.
WangH-CSheuH-HHouK-H, et al.Preparation and characterization of a bilayer Cr-C/Ni-P coating on aluminum 5052 as bipolar plates. Int J Electrochem Sci2017; 12: 5331–5348.
132.
HassanNUTunaboyluBSoydanAM. A competitive design and material consideration for fabrication of polymer electrolyte membrane fuel cell bipolar plates. Designs2019; 3: 13.
KarimiSFraserNRobertsB, et al.. A review of metallic bipolar plates for proton exchange membrane fuel cells: materials and fabrication methods. Adv Mater Sci Eng2012; 2012;828070. DOI:https://doi.org/10.1063/5.0031447
135.
HeinzelAMahlendorfFNiemzigO, et al.Injection moulded low cost bipolar plates for PEM fuel cells. J Power Sources2004; 131: 35–40.
136.
KuoJKChenCK. A novel nylon-6–S316L fiber compound material for injection molded PEM fuel cell bipolar plates. J Power Sources2006; 162: 207–214.
137.
WekaiLZhiyongXHaodongZ, et al.Current status of research on composite bipolar plates for proton exchange membrane fuel cells (PEMFCs): nanofillers and structural optimization. RSC Adv2024; 14(10): 7172–7194. DOI: https://doi.org/10.1039/D3RA08054D
138.
MinkeCHickmannTDos SantosAR, et al.Cost and performance prospects for composite bipolar plates in fuel cells and redox flow batteries. J Power Sources2016; 305: 182–190.
139.
Huya-KouadioJMJamesBDHouchinsC. Meeting cost and manufacturing expectations for automotive fuel cell bipolar plates. ECS Trans2018; 83: 93–109.
140.
TangDEversheimWSchuhG. Qualitative and quantitative cost analysis for sheet metal stamping. Int J Comput Integr Manuf2004; 17(5): 394–412. DOI: https://doi.org/10.1080/09511920410001662120
141.
AgyekumEBAmpahJDWilberforceT, et al.Research progress, trends, and current state of development on PEMFC-new insights from a bibliometric analysis and characteristics of two decades of research output. Membranes (Basel)2022; 12: 1103.
HallWSpencerTRenjithG, et al.The energy and resources institute Creating Innovative Solutions for a Sustainable Future A pathway for scaling-up low carbon hydrogen across the economy The Potential Role of Hydrogen in India.
148.
SontakkeUJajuS. Green hydrogen economy and opportunities for India. IOP Conf Ser Mater Sci Eng2021; 1206: 012005.
GaoXChenJXuR, et al.Research progress and prospect of the materials of bipolar plates for proton exchange membrane fuel cells (PEMFCs). Int J Hydrogen Energy2024; 50: 711–743.
