The work proposed the double parameter optimization method of the non-volute centrifugal fan’s blade profile based on the steepest descent method. Total-pressure efficiency improvement at the high-flow area was taken as an optimization objective. A method of applying the steepest descent method to modify the blade profile of backward centrifugal fan is proposed in this paper. The gradient descent direction was analyzed to design the blade profile and obtain the optimal blade profile at a high-flow rate. Besides, numerical simulations were carried out to analyze the aerodynamic performance and the internal flow characteristics of the centrifugal fan by the computational fluid dynamics method. Numerical results showed that the blade profile along the gradient descent was optimized to effectively increase the total pressure and the total pressure efficiency of the original model at the high-flow rate. The steepest descent method for local optimization could improve the fan blade design.
WangZWXieRWangXF, et al.Numerical Study on influence of moving blade installation angles on performances of a flue gas turbine. In Asia-Pacific Power and Energy Engineering Conference, APPEEC, Chengdu, China, 28–31 March 2010. DOI:10.1109/APPEEC.2010.5449131.
3.
LeeYTVineetAAshvinH, et al.Impeller design of a centrifugal fan with blade optimization. Int J Rotating Machinery2011; 2011(1): 1–16. DOI: 10.1155/2011/537824.
4.
LeeYT. Impact of fan gap flow on the centrifugal impeller aerodynamics. J Fluids Eng2010; 132(9): 091103. DOI: 10.1115/1.4002450.
5.
AlmohammadiKMInghamDBMaL, et al.2-D-CFD analysis of the effect of trailing edge shape on the performance of a straight-blade vertical axis wind turbine. IEEE Trans Sustain Energy2015; 6(1): 228–235. DOI: 10.1109/T STE.2014.2365474.
6.
HeWFZhangXKHanD, et al.Sensitivity analysis from the blade angle regulation of the forced draught fans in an air-cooled steam condenser. Appl Therm Eng. 2017, 123:810–819.DIO:10.1016/j.applthermaleng.2017.05.151
7.
JafariMSojoudiAHafezisefatP, et al.Numerical study of aeroacoustic sound on performance of bladeless fan. Chin J Mech Eng2017; 2(48): 483–494. DOI: CNKI:SUN: YJXB.0.2017-02-026.
8.
WeiYKYingCLXuJ, et al.Effects of single-arc blade profile length on the performance of a forward multiblade fan. Processes2019; 7(9): 629–640. DOI: 10.33 90/pr7090629.
9.
DingHCLiZKGongXB, et al.The influence of blade outlet angle on the performance of centrifugal pump with high specific speed. Vacuum2019; 159: 239–246. DOI: 10.1016/j.vacuum.2018.10.049.
10.
JafariMAfshinHFarhaniehB, et al.Experimental and numerical investigation of a 60cm diameter bladeless fan. J Appl Fluid Mech2016; 9(2): 935–944. DOI: 10.18869/acadpub.jafm.68.225.24081.
11.
TanJMLiSBLiuYP, et al.Performance comparison of multi-blade centrifugal fan with different blade curves. Refrigeration and Air-Conditioning2015; 15(6): 11–14.
12.
Xiao-WeiZAi-LingYEr-YunC. Study on the aerodynamic characteristics of the double circular arc profile of the constant thickness blade of centrifugal fan. Energy Eng2018; 2: 7–11. DOI: 10.16189/j.cnki.nygc.2018.02.002.
13.
ShioyaTStrongeWJ. Impact bending of a rotating rigid-plastic fan blade. J Propulsion Power1985; 1(5): 375–380. DOI: 10.2514/3.22812.
14.
GebrehiwotMGDe BaerdemaekerJBaelmansM. Effect of a cross-flow opening on the performance of a centrifugal fan in a combine harvester: computational and experimental study. Biosyst Eng2010; 105(2): 247–256. DOI: 10.1016/j.biosystemseng.2009.11.003.
15.
MarekR. Shape optimization of the turbomachine channel by a gradient method-accuracy improvement. J Therm Sci2003; 12: 239–244. DOI: CNKI:SUN: RKXY.0.2003-03-009.
16.
WuLDouH-SWeiY, et al.Optimization of blade profile of a plenum fan. Int J Fluid Machinery Syst2016; 9(1): 95–106. DOI: 10.529 3/IJFMS.2016.9.1.095.
17.
DerakhshanSMohammadiBNourbakhshA. The comparison of incomplete sensitivities and Genetic algorithms applications in 3D radial turbomachinery blade optimization. Comput Fluids2010; 39(10): 2022–2029.
18.
KimK-YSeoS-J. Shape optimization of forward-curved-blade centrifugal fan with navier-stokes analysis. J Fluids Eng2004; 126(5): 735–742. DOI: DOI:10.1115/1.1792256.
19.
AmjadimaneshAAjamHNezhadH. Numerical study of blade number effect on the performance of a 3D FC centrifugal fan. Int J Mechatronics Electr Comput Technol2015; 5(15): 2109–2119.
20.
DnuZ. Structural analysis of centrifugal fan impeller using CATIA software. Appl Mech Mater2015; 809–810: 859–864. DOI: 10.4028/www.scientific.net/AMM.809-810.859.
21.
CraveroCMarsanoD. Criteria for the stability limit prediction of high-speed centrifugal compressors with vaneless diffuser. Part I: flow structure analysis. In: Proceedings of the ASME Turbo Expo 2020: Turbomachinery Technical Conference and Exposition, Virtual Conference, 21–25 September 2020. DOI:10.1115/GT2020-14579.
22.
CraveroCMarsanoD. Criteria for the stability limit prediction of high-speed centrifugal compressors with vaneless diffuser. Part II: the development of prediction criteria. In: Proceedings of ASME Turbo Expo 2020: Turbomachinery Technical Conference and Exposition, Virtual Conference, 21–25 September 2020. DOI:10.1115/GT2020-14589.
23.
LarsSS. An introduction to computational fluid dynamics: the finite volume method. Pearson Schweiz Ag2007; 20(5): 400. DOI: 10.1016/j.enganabound.200 4.05.002.
24.
YangH.NuernbergerD.KerskenH.-P., 2005. Towards excellence in turbomachinery CFD: a hybrid structured-unstructured RANS solver. In: ASME Turbo Expo 2005: Power for Land, Sea And Air, Reno, Nevada, USA, 6–9 June 2005. DOI:10.1115/GT2005-68735.
25.
BlazekJ. Computational Fluid Dynamics: Principles and Applications. 3rd edition. Oxford: Butterworth-Heinemann, 2015, pp. 409–422. DOI: 10.1016/B978-0-08-0 99995-1.09983-8.
TsengP.YunS.A coordinate gradient descent method for nonsmooth separable minimization. Math Programming2009; 117: 387–423. DOI: 10.1007/s10107-007-0170-0.
28.
ZhouHCaiGZhangJ, et al.Research of wall roughness effects based on Q criterion. Microfluidics and Nanofluidics2017; 21(7): 114–121. DOI: 10.1007/s10404-017-1951-2.
