Sage Journals: Discover world-class research

Abstract

This study set out to explore the influence of phase adjustment on the acoustic field of a cascade thermoacoustic engine. The system consists of one standing wave unit and one traveling wave unit arranged in series. The straight-line configuration allows suppressing a time-averaged mass flow or Gedeon streaming, which causes some unwanted convective heat transport and reduces the efficiency of the system. Theoretically, the regenerator of the traveling wave unit must be operated within the traveling wave phasing and high impedance region in order to achieve an efficient performance. The various techniques of phase adjustment by modifying the configurations and geometrical dimensions of the system are investigated both numerically and experimentally to adjust the position of the sweet spot as well as to achieve the high acoustic impedance in the regenerator. The effective tuning methods with less modification here are accomplished by changing the volume of the down-cavity and reducing the flow area of the down-resonator by inserting the pencil. However, the pencil insertion scheme causes an extra loss due to viscous dissipation that should be taken into account. The change of the down-resonator length has a strong effect on the acoustic field in the system. After the phase-adjustment schemes are completely implemented, the performance of the proposed system is significantly improved, in which the regenerator of the traveling wave unit operates within the traveling wave phase region with high acoustic impedance. This prototype operated with air at atmospheric pressure can supply acoustic power up to 33 W to the down-resonator, which is about 9.5% of Carnot efficiency.

Keywords

Cascade phase-adjustment sweet spot thermoacoustic engine traveling wave phasing

Get full access to this article

View all access options for this article.

References

Jaworski

Mao

. Development of thermoacoustic devices for power generation and refrigeration. Proc IMechE, Part A: J Power and Energy 2013; 227: 762–782.

Ceperley

. A pistonless Stirling engine – The traveling wave heat engine. J Acoust Soc Am 1979; 66: 1508–1513.

Ceperley

. Gain and efficiency of a short traveling wave heat engine. J Acoust Soc Am 1985; 77: 1239–1244.

Yazaki

Iwata

Maekawa

. Traveling wave thermoacoustic engine in a looped tube. Phys Rev Lett 1998; 81: 3128–3131.

Backhaus

Swift

. A thermoacoustic-Stirling heat engine: Detailed study. J Acoust Soc Am 2000; 107: 3148–3166.

Gardner

Swift

. A cascade thermoacoustic engine. J Acoust Soc Am 2003; 114: 1905–1919.

Luo E, Dai E and Ling H. Basic operation principle of a novel cascade thermoacoustic prime mover. In Proceedings of the twentieth international cryogenic engineering conference (ICEC20). Oxford: Elsevier Science, 2005, pp.317–320.

Ling H, Luo E, Dai W, et al. Numerical simulation on a novel cascade thermoacoustic prime mover. In: Proceedings of the twentieth international cryogenic engineering conference (ICEC20). Oxford: Elsevier Science, 2005, pp.333–336.

Xie

. Design and experiment on a mini cascade thermoacoustic engine. Ultrasonics 2006; 44: e1515–e1517.

10.

. A high frequency cascade thermoacoustic engine. Cryogenics 2006; 46: 771–777.

11.

Biwa

Tashiro

Mizutani

. Experimental demonstration of thermoacoustic energy conversion in a resonator. Phys Rev E 2004; 69: 066304–066304.

12.

Ward

Clark

Swift

. Design environment for low-amplitude thermoacoustic energy conversion (DELTAEC) programme. Version 6.2 b3, New Mexico, USA: Los Alamos National Laboratory, 2008.

13.

Swift

. Thermoacoustics: A unifying perspective for some engines and refrigerators. J Acoust Soc Am 2003; 113: 2379–2381.

14.

Organ

. Thermodynamics and gas dynamics of the Stirling cycle machine, Cambridge: Cambridge University Press, 1992.

15.

Fusco

Ward

Swift

. Two-sensor power measurements in lossy ducts. J Acoust Soc Am 1992; 91: 2229–2235.

16.

Swift

. Thermoacoustic engines. J Acoust Soc Am 1988; 84: 1145–1180.

Effect of phase adjustment on the acoustic field of a cascade thermoacoustic engine

Abstract

Keywords

Get full access to this article

References