Sage Journals: Discover world-class research

Abstract

The hydraulic design optimization and performance analysis of a mixed-flow pump for marine waterjet propulsion has been carried out using mean streamline analysis and three-dimensional computational fluid dynamics (CFD) code. In the present study, conceptual design optimization has been formulated with a nonlinear objective function to minimize fluid dynamic losses and then a commercial CFD code was incorporated to allow for detailed flow dynamic phenomena in the pump system. The newly designed mixedflow model pump has been tested in the laboratory. Predicted performance curves by the CFD code agree fairly well with experimental data for a newly designed mixed-flow pump over the normal operating conditions. The design and prediction methods presented herein can be used efficiently as a unified hydraulic design process of mixed-flow pumps for marine waterjet propulsion.

Keywords

waterjet propulsion mixed-flow pump mean streamline analysis performance characteristics commercial CFD code

Get full access to this article

View all access options for this article.

References

Koushan

A preliminary design and off-design prediction method for waterjet propulsion systems. International Conference on Waterjet Propulsion—Latest Developments, Amsterdam, The Netherlands, October 1998, Paper No. 3 (The Royal Institution of Naval Architects, London).

Huntsman

Hothersall

Development of quasi 3D design methods and 3D flow solvers for the hydrodynamic design of water jets. International Conference on Waterjet Propulsion III, Gothenburg, Sweden, February 2001, Paper No. 10 (The Royal Institution of Naval Architects, London).

H. W.

Yoon

E. S.

Chung

M. K.

An optimum set of loss models for performance prediction of centrifugal compressors. Proc. Instn Mech. Engrs, Part A: J. Power and Energy, 1997, 211(A4), 331–338.

Yoon

E. S.

H. W.

Chung

M. K.

J. S.

Performance prediction of mixed-flow pumps. Proc. Instn Mech. Engrs, Part A: J. Power and Energy, 1998, 212(A2), 109–115.

H. W.

Kim

K-Y.

Mean streamline performance analysis of mixed-flow fan impellers covering the low flowrate characteristics. Proc. Instn Mech. Engrs, PartA: J. Power and Energy, 2001, 215(A4), 513–518.

H. W.

Chung

M. K.

Optimum values of design variables versus specific speed for centrifugal pumps. Proc. Instn Mech. Engrs, Part A: J. Power and Energy, 1999, 213(A3), 219–226.

H. W.

Kim

K-Y.

Conceptual design optimization of mixed-flow pump impellers using mean streamline analysis. Proc. Instn Mech. Engrs, Part A: J. Power and Energy, 2001, 215(A1), 133–138.

CFX-BladeGen & CFX-BladeGenPlus, Version 4.1 (AEA Technology Engineering Software Inc., El Dorado Hills).

Sell

Treiber

Casciaro

Gyarmathy

Tip-clearance-affected flow fields in a turbine blade row. Proc. Instn Mech. Engrs, Part A: J. Power and Energy, 1999, 213(A4), 309–318.

10.

Koumoutsos

Tourlidakis

Elder

R. L.

Computational studies of unsteady flows in a centrifugal compressor stage. Proc. Instn Mech. Engrs, Part A: J. Power and Energy, 2000, 214(A6), 611–633.

11.

Zangeneh

CFD calculation of the flow through a water-jet pump. International Conference on Waterjet Propulsion III, Gothenburg, Sweden, February 2001, Paper No. 14 (The Royal Institution of Naval Architects, London).

12.

Balje

O. E.

Turbomachines: A Guide to Design, Selection, and Theory, 1981 (John Wiley, New York).

A practical approach to the hydraulic design and performance analysis of a mixed-flow pump for marine waterjet propulsion

Abstract

Abstract

Keywords

Get full access to this article

References