The marvelous uniqueness of vibration responses of faulty roller bearings can be simply observed through its vibration signature. Therefore, vibration analysis has been claimed as an effective tool not only for primitive detection but also for subsequent analysis. The dynamic behavior of roller bearings has been investigated by systematic modeling of system and its validation under diverse operating conditions. This article presents an overview of imperative marks in the development of dynamic modeling of rolling-element bearing, which especially predicted vibration responses of damaged bearings. This study aims to address dimensional analysis; a new and imperative way to model the dynamic behavior of rolling-element bearings and their real-time performance in a rotor-bearing system. The findings are described with influential advantages over earlier research to pinpoint the intention behind its development. A literature summary is trailed by remarkable findings and future directions for research.
SaidiLJaouherBAFarhatF. The use of spectral kurtosis as a trend parameter for bearing faults diagnosis. In: 15th international conference on sciences and techniques of automatic control and computer engineering, Hammamet, 21–23 December 2014, pp. 211–215. New York: IEEE.
2.
TandonNNakraBC. Vibration and acoustic monitoring techniques for the detection of defects in rolling element bearings: a review. Shock Vib Dig1992; 24(3): 3–11.
3.
KimPYLoweIRG. A review of rolling-element bearing health monitoring. In: Proceedings of machinery vibration monitoring and analysis meeting vibration institute, Houston, TX, 19–21April1983, pp. 145–154NRC Aeronautical & Mechanical Engineering Library.
4.
MathewJAlfredsonRJ. The condition monitoring of rolling element bearings using vibration analysis. J Vib Acoust Stress Reliab Des1984; 106(3): 447–453.
5.
McFaddenPDSmithJD. Vibration monitoring of rolling element bearings by the high-frequency resonance technique: a review. Tribol Int1984; 17(1): 3–10.
6.
KimPYI. A review of rolling-element bearing health monitoring: preliminary test results on current technologies. II. In: Proceedings of machinery vibration monitoring and analysis meeting, Vibration institute, New Orleans, LA, 26–28 June 1988, pp. 127–137.
7.
KimPY. A review of rolling-element bearing health monitoring (III): preliminary test results on eddy current proximity transducer technique. In: Proceedings of 3rd international conference on vibration in rotating machinery, York, Institution of Mechanical Engineers, 11–13 September 1984, pp. 119–125.
8.
HouserDRDrosjackMJ. Vibration signal analysis techniques. Technical report US. Army Air Mobility Research and Development Laboratory, Moffett Field, California, 1973.
9.
CollacottRA. Vibration monitoring and diagnosis techniques for cost-effective plant maintenance. New York: Halsted Press, 1979.
10.
RogerLM. The application of vibration analysis and acoustic emission source location to on-line condition monitoring of anti-friction bearings. Tribol Int1979; 12(2): 51–58.
11.
YuWMechefskeCKTimuskM. The dynamic coupling behavior of a cylindrical geared rotor system subjected to gear eccentricities. Mech Mach Theory2017; 107: 105–122.
12.
YuWMechefskeCKTimuskM. Effects of tooth plastic inclination deformation due to spatial cracks on the dynamic features of a gear system. Nonlinear Dyn2017; 87: 2643–2659.
13.
SwanssonNSFavaloroSC. Applications of vibration analysis to the condition monitoring of rolling element bearings. Technical Report ARL-AERO-PROP-R-163, January1984. Canberra, ACT, Australia: Defense Science and Technology Organization.
14.
ChoudhuryATandonN. Application of acoustic emission technique for the detection of defects in rolling element bearings. Tribol Int2000; 33(1): 39–45.
15.
AntoniJ. The spectral kurtosis: a useful tool for characterizing non-stationary signals. Mech Syst Signal Pr2006; 20(2): 282–307.
16.
AntoniJRandallRB. The spectral kurtosis: application to the vibratory surveillance and diagnostics of rotating machines. Mech Syst Signal Pr2006; 20(2): 308–331.
17.
AntoniJ. Fast computation of the kurtogram for the detection of transient faults. Mech Syst Signal Pr2007; 21(1): 108–124.
18.
MbaDRaoRB. Development of acoustic emission technology for condition monitoring and diagnosis of rotating machines; bearings, pumps, gearboxes, engines, and rotating structures. Shock Vib Dig2006; 38(1): 3–16.
19.
JardineAKLinDBanjevicD. A review on machinery diagnostics and prognostics implementing condition-based maintenance. Mech Syst Signal Pr2006; 20(7): 1483–1510.
20.
RandallRBAntoniJ. Rolling element bearing diagnostics: a tutorial. Mech Syst Signal Pr2011; 25(2): 485–520.
21.
RandallRB. Vibration-based condition monitoring: industrial aerospace and automotive applications. Hoboken, NJ: John Wiley & Sons, 2011.
22.
MaHSongRPangX, et al. Time-varying mesh stiffness calculation of cracked spur gears. Eng Fail Anal2014; 44: 179–194.
23.
MaHZengJFengR, et al. Review on dynamics of cracked gear systems. Eng Fail Anal2015; 55: 224–245.
24.
MaHPangXFengR, et al. Fault features analysis of cracked gear considering the effects of the extended tooth contact. Eng Fail Anal2015; 48: 105–120.
25.
WuWHuCHuJ, et al. Jet cooling for rolling bearings: flow visualization and temperature distribution. Appl Therm Eng2016; 105: 217–224.
26.
GhaisasNV. Dynamics of cylindrical and tapered roller bearings using the discrete element method. MSc thesis, School of mechanical engineering, Purdue University, West Lafayette, IN, 2003.
27.
GuptaPK. Advanced dynamics of rolling elements. New York: Springer, 1984, p. 5.
28.
LiewAFengNHahnE. Transient rotordynamic modeling of rolling element bearing systems. J Eng Gas Turbin Power2002; 124(4): 984–9991.
29.
DaidiAChaibZGhosnA. 3D simplified finite elements analysis of load and contact angle in a slewing ball bearing. J Mech Design2008; 130(8): 082601.
30.
WaltersCT. The dynamics of ball bearings. J Lubricat Technol1971; 93(1): 1–10.
31.
MaurielloJALagasseNJonesAB, et al. Rolling element bearing retainer analysis. DTIC document report no AD 774 264, 1973. Fort Belvoir, VI: Defense Technical Information Center.
KannelJWBuparaSS. A simplified model of cage motion in angular contact bearings operating in the EHD lubrication regime. J Lubricat Technol1978; 100(3): 395–403.
34.
GuptaPK. Transient ball motion and skid in ball bearings. J Lubricat Technol1975; 97(2): 261–269.
35.
GuptaPK. Dynamics of rolling element bearings—Parts I: cylindrical roller bearing analysis. J Lubricat Technol1979; 101(3): 293–302.
36.
GuptaPK. Some dynamic effects in high-speed solid-lubricated ball bearings. ASLE Trans1983; 26(3): 393–400.
37.
BrownPFCarranoMJDobekLJ, et al. Main shaft high-speed cylindrical roller bearings for gas turbine engines Parts I to IV. Report NAPC-PE-60C, Navel Air Propulsion Center, Trenton, New Jersey, 1980.
MeeksCRNgKO. The dynamics of ball separators in ball bearings—Part I: analysis. ASLE Trans1985; 28(3): 277–287.
40.
MeeksCR. The dynamics of ball separators in ball bearings—Part II: results of optimization study. ASLE Trans1985; 28(3): 288–295.
41.
GuptaPKForsterNH. Modeling of wear in a solid- lubricated ball bearing. ASLE Trans1987; 30(1): 55–62.
42.
GuptaPK. On the geometrical imperfections in ball bearings. J Tribol1988; 110(1): 19–25.
43.
GuptaPK. On the frictional instabilities in a cylindrical roller bearing. Tribol Trans1990; 33(3): 395–401.
44.
GuptaPK. On the dynamics of a tapered roller bearing. J Tribol1989; 111(2): 278–287.
45.
GuptaPK. Visco-elastic effects in Mil-L-7808-type lubricant part III: model implementation in bearing dynamics computer code. Tribol Trans1992; 35(4): 724–730.
46.
AramakiH. Rolling bearing analysis program package brain. Motion Control1997; 3: 15–24.
47.
StackeLEFritzsonDNordlingP. Beast—a rolling bearing simulation tool. Proc IMechE, Part K: J Multi-body Dynamics1999; 213(2): 63–71.
48.
StackeLEFritzsonD. Dynamic behaviour of rolling bearings: simulations and experiments. Proc IMechE, Part J: J Engineering Tribology2001; 215(6): 499–508.
HoupertL. CAGEDYN: a contribution to roller bearing dynamic calculations part I: basic tribology concepts. Tribol Trans2009; 53(1): 1–9.
51.
NakhaeinejadMBryantMD. Dynamic modeling of rolling element bearings with surface contact defects using bond graphs. J Tribol2011; 133(1): 011102.
52.
YeZWangL. Effect of external loads on cage stability of high-speed ball bearings. Proc IMechE, Part J: J Engineering Tribology2015; 229(11): 1300–1318.
53.
WensingJA. On the dynamics of ball bearings. PhD Thesis, Department of Mechanical Engineering, University of Twente, Enschede, The Netherlands, 1998.
54.
SakaguchiTHaradaK. Dynamic analysis of cage stress in tapered roller bearings using component-mode-synthesis method. J Tribol2009; 131(1): 011102.
55.
SakaguchiTHaradaK. Dynamic analysis of cage behavior in a tapered roller bearing. J Tribol2006; 128(3): 604–611.
56.
WeinzapfelNSadeghiF. A discrete element approach for modeling cage flexibility in ball bearing dynamics simulations. J Tribol2009; 131(2): 021102.
57.
AshtekarASadeghiF. A new approach for including cage flexibility in dynamic bearing models by using combined explicit finite and discrete element methods. J Tribol2012; 134(4): 041502.
58.
BrouwerMDSadeghiFAshtekarA, et al. Combined explicit finite and discrete element methods for rotor bearing dynamic modeling. Tribol Trans2015; 58(2): 300–315.
59.
McFaddenPDSmithJD. The Vibration Produced by Multiple point defects in a rolling element bearing. J Sound Vib1985; 98(2): 263–273.
60.
SchlichtingH. Boundary layer theory, 7th ed. New York: McGraw Hill, 1979, pp. 596–631.
61.
GoksemPGHargreavesRA. The effect of viscous shear heating on both film thickness and rolling traction in an EHL line contact—Part I: fully flooded conditions. J Lubricat Technol1978; 100(3): 346–352.
62.
McGrewJMGuAChengH, et al. Elastohydrodynamic lubrication: preliminary design manual. DTIC document report no AFAPL-TR-70-27, 1970. Fort Belvoir, VI: Defense Technical Information Center.
63.
McCoolJIChiuIPLiuJY, et al. Influence of elastohydrodynamic lubrication on the life and operation of turbine engine ball bearings. SKF, report no. AL75PO14, SKF Group Investor Relations, 1975.
64.
HoupertL. Piezoviscous—rigid rolling, and sliding traction forces application: the rolling element—cage pocket contact. J Tribol1987; 109(2): 363–370.
65.
ForsterNHSchrandJBGuptaPK. Viscoelastic effects in MIL-L-7808-type lubricant Part II: experimental data correlations. Tribol Trans1992; 35(2): 275–280.
66.
GardosM.Solid lubricated rolling element bearings semiannual status report No. 4 and No. 5—Part I: executive summary. Hughes Aircraft Company, Report No. FR 81-76-661, 1981.
67.
MurakiMKimuraY. Traction characteristics of lubricating oils (2nd report, A simplified thermal theory of traction with a non-linear viscoelastic model). J Japan Soc Lubricat Eng1983; 28(10): 753–760 (in Japanese).
68.
KragelskiiIVDobychinMNKombalovVS. Friction and wear: calculation methods. Oxford: Pergamon Press, 1982, pp. 156–207.
69.
PanPHamrockBJ. Simple formulas for performance parameters used in elastohydrodynamically lubricated line contacts. J Tribol1989; 111(2): 246–251.
70.
MartinH. Lubrication of gear teeth. Engineering1916; 102: 119–121.
71.
HarrisTA. Rolling bearing analysis. Hoboken, NJ: John Wiley & Sons, 1966, p.01-481.
72.
RubiniRMeneghettiU. Application of the envelope and wavelet transform analyses for the diagnosis of incipient faults in ball bearings. Mech Syst Signal Pr2001; 15(2): 287–302.
73.
BellRNMcwilliamsDWOdonnellP, et al. Report of large motor reliability survey of industrial and commercial installations, part I. IEEE Trans Ind Appl1985; 21(4): 853–864.
74.
BellRNHeisingCROdonnellP, et al. Report of large motor reliability survey of industrial and commercial installations, part II. IEEE Trans Ind Appl1985; 21(4): 865–872.
75.
O’DonnellPHeisingCSinghC, et al. Report of large motor reliability survey of industrial and commercial installations, part III. IEEE Trans Ind Appl1987; 23(1): 153–158.
76.
AlbrechtPFAppiariusJCMcCoyRM, et al. Assessment of the reliability of motors in utility applications: updated. IEEE T Energy Convers1986; 1: 39–46.
77.
ZhangPDuYHabetlerTG, et al. A survey of condition monitoring and protection methods for medium voltage induction motors. IEEE Trans Ind Appl2011; 47(1): 34–46.
78.
SeinschHO.Monitoring und diagnose elektrischer maschinen und antriebe. In: Proceedings VDE workshop allianz schadensstatistik an HS Motoren, Frankfurt am Main, 28 June 2001.
79.
LouBHanLLuZ, et al. The rolling contact fatigue behaviors in carburized and hardened steel. In: Fatigue 90: proceedings of the fourth international conference on fatigue and fatigue thresholds (eds KitagawaHTanakaT), Honolulu, HI, Birmingham, UK : Materials and Component Engineering Publications, 15–20 July 1990, pp. 627–632.
80.
HonoluluHISahetaV. Dynamics of rolling element bearings using discrete element method. M.S. thesis, Purdue University, West Lafayette, IN, 1990.
RajeNSadeghiFRateickRG, et al. A numerical model for life scatter in rolling element bearings. J Tribol2008; 130(1): 011011.
83.
RajeNSadeghiFRateickRG. A statistical damage mechanics model for subsurface initiated spalling in rolling contacts. J Tribol2008; 130(4): 042201.
84.
JalalahmadiBSadeghiF. A Voronoi FE fatigue damage model for life scatter in rolling contacts. J Tribol2010; 132(2): 021404.
85.
WarhadpandeASadeghiFKotzalasMN, et al. Effects of plasticity on subsurface initiated spalling in rolling contact fatigue. Int J Fatigue2012; 36(1): 80–95.
86.
WeinzapfelNSadeghiFBakolasV, et al. A 3D finite element study of fatigue life dispersion in rolling line contacts. J Tribol2011; 133(4): 042202.
87.
WeinzapfelNSadeghiFBakolasV. An approach for modeling material grain structure in investigations of Hertzian subsurface stresses and rolling contact fatigue. J Tribol2010; 132(4): 041404.
88.
WeinzapfelNSadeghiF. Numerical modeling of subsurface initiated spalling in rolling contacts. Tribol Int2013; 59: 210–221.
89.
YoshiokaTFujiwaraT. Measurement of propagation initiation and propagation time of rolling contact fatigue cracks by observation of acoustic. Tribol Ser1987; 12: 29–33.
90.
YoshiokaT. Detection of rolling contact sub-surface fatigue cracks using acoustic emission technique. Lubr Eng1993; 49(4): 303–308.
91.
ManoHoshiokaTKorenagaA, et al. Relationship between growth of rolling contact fatigue cracks and load distribution. Tribol Trans2000; 43(3): 367–376.
92.
SchwachDWGuoYB. A fundamental study on the impact of surface integrity by hard turning on rolling contact fatigue. Int J Fatigue2006; 28(12): 1838–1844.
93.
ElforjaniMMbaD. Assessment of natural crack initiation and its propagation in slow-speed bearings. Nondestructive Test Eval2009; 24(3): 261–275.
94.
EftekharnejadBCarrascoMRCharnleyB, et al. The application of spectral kurtosis on acoustic emission and vibrations from a defective bearing. Mech Syst Signal Pr2011; 25(1): 266–284.
95.
ZhangZQLiGLWangHD, et al. Investigation of rolling contact fatigue damage process of the coating by acoustics emission and vibration signals. Tribol Int2012; 47: 25–31.
96.
ZhaoPHadfieldMWangYG, et al. Subsurface propagation of partial ring cracks under rolling contact. Part I. Exp Stud Wear2006; 261(3): 382–389.
97.
ZhaoPHadfieldMWangYG, et al. Subsurface propagation of partial ring cracks under rolling contact. Part II. Fract Mech Anal Wear2006; 261(3): 390–397.
98.
GlodežSPotocnikRFlaskerJ, et al. Numerical modelling of crack path in the lubricated rolling-sliding contact problems. Eng Fract Mech2008; 75(3): 880–891.
99.
KadinYRychahivskyyAV. Modeling of surface cracks in rolling contact. Mater Sci Eng A2012; 541: 143–151.
100.
WenJSJuWEHanTK, et al. Finite element analysis of a subsurface penny-shaped crack with crack-face contact and friction under a moving compressive load. J Mech Sci Technol2012; 26(9): 2719–2726.
101.
PotočnikRFlaškerJGlodežS. Numerical analysis of 3D subsurface crack propagation in large slewing bearing. Princ Pract Constr Program2013; 2009: 1033–1040.
102.
DengSHanXQinX, et al. Subsurface crack propagation under rolling contact fatigue in bearing ring. Sci China Technol Sci2013; 56(10): 2422–2432.
103.
DengSQinXHuangS. A study on the effect of subsurface crack propagation on rolling contact fatigue in a bearing ring. J Mech Sci Technol2015; 29(3): 1029–1038.
104.
BomidiJASadeghiF. Three-dimensional finite element elastic-plastic model for subsurface initiated spalling in rolling contacts. J Tribol2014; 136(1): 011402.
105.
PaulsonNREvansNEBomidiJA, et al. A finite element model for rolling contact fatigue of refurbished bearings. Tribol Int2015; 85: 1–9.
106.
WalvekarAAPaulsonNSadeghiF, et al. A new approach for fatigue damage modeling of subsurface initiated spalling in large rolling contacts. J Tribol2017; 139: 011101.
107.
LiuJShiZFShaoYM. An investigation of a detection method for a subsurface crack in the outer race of a cylindrical roller bearing. Eksploatacja I Niezawodnosc. Maint Reliab2017; 19(2): 211–219.
108.
LiuJShiZFShaoYM, et al. A numerical study on vibrations of a roller bearing with a surface crack in the races. In: Proceedings of the ASME 2017 international design engineering technical conferences & computers and information in engineering conference IDETC, Cleveland, OH, 6–9 August 2017.
109.
RafsanjaniaAAbbasionaSFarshidianfarbA, et al. Nonlinear dynamic modeling of surface defects in rolling element bearing systems. J Sound Vib2009; 319: 1150–1174.
110.
TadinaMBoltežarM. An improved model of a ball bearing for the simulation of vibration signals due to faults during the run-up. J Sound Vib2011; 330(17): 4287–4301.
111.
RahnejatHGoharR. The vibrations of radial ball bearings. J Mech Eng Sci1985; 199(3): 181–193.
112.
ChangqingBQingyuX. Dynamic model of ball bearings with internal clearance and waviness. J Sound Vib2006; 294(1): 23–48.
113.
HarshaSP. The effect of ball size variation on nonlinear vibrations associated with ball bearings. J Multi-Body Dyn2004; 218(4): 191–210.
114.
UpadhyaySHJainSCHarshaSP. Non-linear vibration signature analysis of a high-speed rotating shaft due to ball size variations and varying number of balls. J Multi Body Dyn2009; 223(2): 83–105.
115.
KappaganthuKNatarajC. Nonlinear modeling and analysis of a rolling element bearing with a clearance. Commun Nonlinear Sci Numer Simul2011; 16(10): 4134–4145.
116.
ZhangXHanQPengZ, et al. Stability analysis of a rotor-bearing system with time-varying bearing stiffness due to finite number of balls and unbalanced force. J Sound Vib2013; 332(25): 6768–6784.
117.
ZhangXHanQPengZ, et al. A comprehensive dynamic model to investigate the stability problems of the rotor-bearing system due to multiple excitations. Mech Syst Signal Pr2016; 70: 1171–1192.
118.
BerceaICretuSNeliasD. Analysis of double-row tapered roller bearings, Part I-model. Tribol Trans2003; 46(2): 228–239.
119.
KiralZKaragülleH. Simulation and analysis of vibration signals generated by rolling element bearing with defects. Tribol Int2003; 36(9): 667–678.
120.
SopanenJMikkolaA. Dynamic model of a deep-groove ball bearing including localized and distributed defects, part 1: theory. J Multi Body Dyn2003; 217(3): 201–211.
121.
SawalhiNRandallRB. Simulating gear and bearing interactions in the presence of faults: Part I: the combined gear bearing dynamic model and the simulation of localized bearing faults. Mech Syst Signal Pr2008; 22(8): 1924–1951.
122.
LiuJShaoYLimTC. Vibration analysis of ball bearings with a localized defect applying piecewise response function. Mech Mach Theory2012; 56: 156–169.
123.
LiuJShaoYZuoMJ. The effects of the shape of a localized defect in ball bearings on the vibration waveform. J Multi Body Dyn2013; 227(3): 261–274.
124.
LiuJShaoYLimTC. Impulse vibration transmissibility characteristics in the presence of localized surface defects in deep groove ball bearing systems. J Multi Body Dyn2014; 228(1): 62–81.
125.
LiuJShaoYZhuWD. A new model for the relationship between vibration characteristics caused by the time-varying contact stiffness of a deep groove ball bearing and defect Sizes. J Tribol2015; 137(3): 031101.
126.
LiuJShaoY. A new dynamic model for vibration analysis of a ball-bearing due to a localized surface defect considering edge topographies. Nonlinear Dyn2015; 79(2): 1329–1351.
127.
YuanXZhuYZhangY. Multi-body vibration modelling of ball bearing-rotor system considering single and compound multi-defects. J Multi Body Dyn2014; 228(2): 199212.
128.
KulkarniPGSahasrabudheAD. A dynamic model of ball bearing for simulating localized defects on outer race using cubic hermite spline. J Mech Sci Technol2014; 28(9): 3433–3442.
129.
NiuLCaoHHeZ, et al. Dynamic modeling and vibration response simulation for high speed rolling ball bearings with localized surface defects in raceways. J Manuf Sci Eng2014; 136(4): 041015.
130.
NiuLCaoHXiongX. Dynamic modeling and vibration response simulations of angular contact ball bearings with ball defects considering the three-dimensional motion of balls. Tribol Int2017; 109: 26–39.
131.
PatelUAUpadhyaySH. Theoretical model to predict the effect of the localized defect on dynamic behavior of cylindrical roller bearing at inner race and outer race. J Multi Body Dyn2014; 228(2): 152–171.
132.
NakhaeinejadM. Fault detection and model-based diagnostics in nonlinear dynamic systems, PhD Thesiss, The University of Texas at Austin, Austin, TX, 2010.
133.
PurohitRKPurohitK. Dynamic analysis of ball bearings with effect of preload and number of balls. Int J Appl Mech Eng2006; 11(1): 77–91.
134.
TiwariMGuptaKPrakashO. Dynamic response of an unbalanced rotor supported on ball bearings. J Sound Vib2000; 238(5): 757–779.
135.
TiwariMGuptaKPrakashO. Effect of radial internal clearance of a ball bearing on the dynamics of a balanced horizontal rotor. J Sound Vib2000; 238(5): 723–756.
136.
CaoMXiaoJ. A comprehensive dynamic model of double-row spherical roller bearing—model development and case studies on surface defects, preloads, and radial clearance. Mech Syst Signal Pr2008; 22(2): 467–489.
137.
BehzadMBastamiARDavidMB. A new model for estimating vibrations generated in the defective rolling element bearings. J Vib Acoust2011; 133: 1–8.
138.
ReddyGMReddyVD. Theoretical investigations on dimensional analysis of ball bearing parameters by using Buckingham Pi-theorem. Proced Eng2014; 97: 1305–1311.
139.
ZhangYYWangXLZhangXQ, et al. Dynamic analysis of a high-speed rotor-ball bearing system under elastohydrodynamic lubrication. J Vib Acoust2014; 136(6): 061003.
140.
LimTCSinghR. Vibration transmission through rolling element bearings Part II: system studies. J Sound Vib1990; 139(2): 201–225.
141.
CuiLZhengJ. Nonlinear vibration and stability analysis of a flexible rotor supported on angular contact ball bearings. J Vib Control2014; 20(12): 1767–1782.
142.
WangWHuLZhangS, et al. Modeling high speed angular contact ball bearing under the combined radial, axial, and moment loads. J Mech Eng Sci2014; 228(5): 852–864.
143.
GunduzADreyerJTSinghR. Effect of bearing preloads on the modal characteristics of a shaft-bearing assembly: experiments on double row angular contact ball bearings. Mech Syst Signal Pr2012; 31: 176–195.
144.
KabusSHansenMRMouritsenA. New quasistatic multi-degree of freedom tapered roller bearing model to accurately consider non-Hertzian contact pressures in time-domain simulations. J Multi Body Dyn2014; 228: 111–125.
145.
WijnantYHWensingJANijenGV. The influence of lubrication on the dynamic behaviour of ball bearings. J Sound Vib1999; 222(4): 579–596.
146.
TiwariRVyasNS. Estimation of non-linear stiffness parameters of rolling element bearings from random response of rotor-bearing systems. J Sound Vib1995; 187(2): 229–239.
147.
PatilMSMathewJRajendrakumarPK, et al. A theoretical model to predict the effect of localized defect on vibrations associated with ball bearing. Int J Mech Sci2010; 52: 1193–1201.
148.
AshtekarASadeghiF. Experimental and analytical investigation of high-speed turbocharger ball bearings. ASME J Eng Gas Turbine Power2011; 133: 1–14.
QiuJSethBBLiangSY, et al. Damage mechanics approach for bearing lifetime prognostics. Mech Syst Signal Pr2002; 16(5): 817–829.
151.
HarshaSP. Nonlinear dynamic analysis of rolling element bearings due to cage run-out and number of balls. J Sound Vib2006; 289(1): 360–381.
152.
PandyaDHUpadhyaySHHarshaSP. Nonlinear dynamic analysis of high-speed bearings due to combined localized defects. J Vib Control2014; 20(15): 2300–2313.
153.
AiniRRahnejatHGoharR. Vibration modeling of rotating spindles supported by lubricated bearings. J Tribol2002; 124(1): 158–165.
154.
JainSHuntH. A dynamic model to predict the occurrence of skidding in wind-turbine bearings. J Phys Conf Ser2011; 305(1): 012027.
155.
KoganGKleinRKushnirskyA, et al. Toward a 3D dynamic model of a faulty duplex ball bearing. Mech Syst Signal Pr2015; 54: 243–258.
156.
LiuJShaoY. A numerical investigation of effects of defect edge discontinuities on contact forces and vibrations for a defective roller bearing. J Multi Body Dyn2016; 230(4): 387–400.
157.
LeblancANeliasDDefayeC. Nonlinear dynamic analysis of cylindrical roller bearing with flexible rings. J Sound Vib2009; 325(1): 145–160.
158.
PatelUKAUpadhyaySH. Nonlinear dynamic response of cylindrical roller bearing-rotor system with 9 degrees of freedom model having a combined localized defect at inner-outer races of bearing. Tribol Trans2017; 60(2): 284–299.
159.
SuYTLinMHLeeMS. The effect of surface irregularities on roller bearing vibrations. J Sound Vib1993; 162: 455–466.
160.
TandonNChoudhuryA. A theoretical model to predict the vibration response of rolling-element bearing in a rotor-bearing system to distributed defects under radial load. J Tribol2000; 122: 609–615.
161.
HarshaSPKumarSPrakashR. Non-linear dynamic behaviors of rolling element bearings due to surface waviness. J Sound Vib2004; 272: 557–580.
162.
KıralZKaragulleH. Vibration analysis of rolling element bearings with various defects under the action of an unbalanced force. Mech Syst Signal Pr2006; 20: 1967–1991.
163.
ArslanHAkturkN. An investigation of rolling element vibrations caused by local defects. Trans ASME J Tribol2008; 130: 041101.
164.
PatelVNTandanNPandeyRK. A dynamic model for vibration studies of deep groove ball bearings considering single and multiple defects in races. ASME J Tribol2010; 132: 041101.
165.
WuHZhouQZhangZ, et al. Vibration analysis on the rolling element bearing-rotor system of an air blower. J Mech Sci Technol2012; 26(3): 653–659.
166.
MiragliottaG. The power of dimensional analysis in production systems design. Int J Prod Econ2011; 131: 175–182.
167.
DesavaleRGVenkatachalamRChavanSP. Antifriction bearings damage analysis using experimental data based models. ASME J Tribol 0411; 05135(4): 041105.
168.
DesavaleRGVenkatachalamRChavanSP. Experimental and numerical studies on spherical roller bearings using multivariable regression analysis. ASME J Vib Acoust2014; 136(2): 021022.
169.
DesavaleRGKanaiRAVenkatachalamR, et al. Vibration characteristics diagnosis of roller bearing using the new empirical model. J Tribol2016; 138: 011103.
170.
KanaiRADesavaleRGChavanSP. Experimental based faults diagnosis of rolling bearings using artificial neural network. J Tribol2016; 138: 031103.
171.
DesavaleRGMali AsmitaR. Detection of damage of rotor-bearing systems using experimental data analysis. Proced Eng2016; 144: 195–201.
172.
DesavaleRG. Vibration characteristics diagnosis of a rotor-bearing system by dimensional analysis approach: an experimental study. J Comput Nonlin Dynam2019; 14: 014501.
173.
Maheedhara ReddyGDiwakar ReddyVSatheesh KumarB, et al. Experimental investigation on radial ball bearing parameters using Taguchi method. J Appl Comput Mech2018; 4(1): 69–74.
174.
KumbharSGSudhagarPE. Fault diagnostics of roller bearings using dimension theory. ASME J Nondestruct Eval2021; 4(1): 011001.
175.
JamadarIMVakhariaDP. Model development for investigation of localized defects in taper roller bearings using matrix method of dimensional analysis. Proced Eng2016; 144: 751–758.
176.
JamadarIMVakhariaDP. A numerical model for the identification of the structural damages in rolling contact bearings using a matrix method of dimensional analysis. J Tribol2016; 138: 021106.
177.
JamadarIMVakhariaDP. An in-situ synthesized model for detection of defective roller in rolling bearings. Eng Sci Tech Int J2016; 19: 1488–1496.
178.
JamadarIMVakhariaDP. A novel approach integrating dimensional analysis and neural networks for the detection of localized faults in roller bearings. Measurement2016; 94: 177–185.
179.
DesavaleRGSalunkheVG. Damage detection of roller bearing system using experiment data. Proced Eng2016; 144: 202–207.
180.
JamadarIMVakhariaDP. A new damage diagnostic approach for deep groove ball bearings having localized surface defects in the raceways. J Tribol2017; 139(6): 061103.
181.
JamadarIMVakhariaD. Correlation of base oil viscosity in grease with vibration severity of damaged rolling bearings. Ind Lubricat Tribol2018; 70(2): 264–272.
182.
JamadarIMBellarySAIKanaiRA, et al. Model-based condition monitoring for the detection of failure of a ball bearing in a centrifugal pump. J Fail Anal Preven2019; 19: 1556–1568.
183.
MassimoCAlbertoI. Analysis of damage of ball bearings of aeronautical transmissions by auto-power spectrum and cross-power spectrum. J Vib Acoust2002; 124: 180–185.
184.
JangGHJeongSW. Stability analysis of a rotating system due to the effect of ball bearing waviness. J Tribol2003; 125: 91–101.
185.
ChoyFKZhouJBraunMJ, et al. Vibration monitoring and damage quantification of faulty ball bearings. J Tribol2005; 127: 776–783.
186.
MevelBGuyaderJL. Experiments on routes to chaos in ball bearings. J Sound Vib2008; 318: 549–564.
187.
KaracayTAkturkN. Experimental diagnostics of ball bearings using statistical and spectral methods. J Tribol Int2009; 42: 836–843.
188.
ChangqingBHongyanZQingyuX. Experimental and numerical studies on nonlinear dynamic behavior of rotor system supported by ball bearings. J Eng Gas Turbin Power2010; 132: 1–5.
189.
PatilMSMathewJRajendrakumarPK. Experimental studies using response surface methodology for condition monitoring of ball bearings. J Tribology2010; 132: 1–6.
190.
KankarPKSharmaSCHarshaSP. Fault diagnosis of ball bearings using continuous wavelet transform. J Appl Soft Computing2011; 11: 2300–2312.
191.
JingLYiminSTeikCL. Vibration analysis of ball bearings with a localized defect applying piecewise response function. J Mech Machine Theory2012; 56: 156–169.
192.
BrianTHRobertXG. Vibration analysis of a sensor-integrated ball bearing. J Vib Acoust2000; 122: 384–392.
193.
KankarPKSharmaSCHarshaSP. Fault diagnosis of high-speed rolling element bearings due to localized defects using response surface method. J Dynam Syst Meas Control2011; 133: 1–14.
194.
AshtekarASadeghiFStackeL. A new approach to modeling surface defects in bearing dynamics simulations. J Tribology2008; 130: 1–8.
195.
SidraKDuttJKTandonN. Extracting rolling element bearing faults from noisy vibration signal using Kalman filter. J Vib Acoust2014; 136: 1–11.
196.
El-ThaljiIJantunenE. A summary of fault modeling and predictive health monitoring of rolling element bearings. J Mech Syst Signal Pr2015; 60(61): 252–272.
197.
PatilVRPatilABPatilSM, et al. Vibration signature analysis technique for detection of faults in gearbox system. Int J Trend Res Develop2016; 3(3): 627–629.
198.
KumbharSGDesavaleRGShindeAA. Theoretical and experimental studies on vibrations produced by defects in taper roller bearing using vibration signature analysis. Int J Eng Res Technol2014; 3(5): 1270–1283.
199.
ShindeAADesavaleRGKumbharSG. Theoretical and experimental studies on vibrations produced by defects in double row ball bearing using response surface method. Int J Res Eng Technol2014; 3(7): 140–145.
200.
KumbharSGPatilVRJadhavPV. Vibration response of double row ball bearing on local defects using multivariable regression analysis. In: International conference on materials manufacturing, and design, Dr. Babasaheb Ambedkar Technological University, Lonere, India, 20–21 December 2016.
201.
PandyaDHUpadhyaySHHarshaSP. Fault diagnosis of rolling element bearing by using multinomial logistic regression and wavelet packet transform. J Soft Comput2013; 18(1): 255–266.
202.
MingboZXiaohangJZhaoZ, et al. Fault diagnosis of rolling element bearings via discriminative subspace learning: visualization and classification. J Expert Syst Appl2014; 41(7): 3391–3401.
203.
Choon-SuPYoung-ChulCYang-HannK. Early fault detection in automotive ball bearings using the minimum variance cepstrum. J Mech Syst Signal Pr2013; 38(2): 534–548.
204.
MarcoCLucaBCristianS, et al. An algorithm to diagnose ball bearing faults in servomotors running arbitrary motion profiles. J Mech Syst Signal Pr2012; 27(1): 667–682.
205.
GrylliasKCAntoniadisIA. A support vector machine approach based on physical model training for rolling element bearing fault detection in industrial environments. J Eng Appl Artif Intell2012; 25(2): 326–344.
206.
BubathiMSanjithMAKrishnakumarB, et al. Roller element bearing fault diagnosis using singular spectrum analysis. J Mech Syst Signal Pr2012; 35(1): 150–166.
207.
HuaqingWPengC. Intelligent diagnosis method for rolling element bearing faults using possibility theory and neural network. J Comput Ind Eng2011; 60(4): 511–518.
208.
SugumaranVRamachandranKI. Fault diagnosis of roller bearing using fuzzy classifier and histogram features with focus on automatic rule learning. J Expert Syst Appl2011; 38(5): 4901–4907.
209.
PanYJinCXinglinL. Bearing performance degradation assessment based on lifting wavelet packet decomposition and fuzzy CMeans. J Mech Syst Signal Pr2010; 24(2): 559–566.
210.
Chun-ChiehWYuanKPing-ChenS, et al. Applications of fault diagnosis in rotating machinery by using time series analysis with neural network. J Expert Syst Appl2010; 37(2): 1696–1702.
211.
SurajkumarGEdwin SudhagarPDesavaleR. G. Theoretical and experimental studies to predict vibration responses of defects in spherical roller bearings using dimension theory. Measurement2020; 161: 107846.
212.
WhileMF. Rolling element bearing vibration transfer characteristics: effect of stiffness. J Appl Mech1979; 46(3): 677–684.
213.
MassiFRocchiJCullaA, et al. Coupling system dynamics and contact behaviour: modelling bearings subjected to environmental induced vibrations and “false brinelling” degradation. Mech Syst Signal Pr2010; 24(4): 1068–1080.
214.
HouLChenYFuY, et al. Application of the HB-AFT method to the primary resonance analysis of a dual-rotor system. Nonlinear Dyn2017; 88(4): 25312551.
215.
HouLChenYFuY, et al. Nonlinear vibration of dual-rotor system with surface waviness in inter-shaft bearing. J Aerosp Power2017; 32(3): 714–722.
216.
SlackTSadeghiF. Explicit finite element modeling of subsurface initiated spalling in rolling contacts. Tribol Int2010; 43(9): 1693–1702.
217.
RenZGlodezSFajdigaG, et al. Surface initiated crack growth simulation in moving lubricated contact. Theoret Appl Fract Mech2002; 38(2): 141–149.
