Abstract
Differentiation of standing and walking based on plantar pressures is helpful in developing strategies to reduce health risks in the workplace. In order to improve the differentiation ability, the paper proposes a new metric for posture differentiation, that is, the pressure ratio on the two anatomical plantar regions. The plantar pressures were collected from 30 persons during walking and standing. After verifying the normal distribution of the pressure ratio by the Monte Carlo method, two-way repeated-measures ANOVA was conducted for the pressure ratios. The advantage of the pressure ratio over two conventional pressure metrics (the average pressure and the peak pressure) is demonstrated by its much larger size effect. Furthermore, the pressure ratio permits to establish value ranges corresponding to walking and standing, which are less influenced by specific person factors, thus facilitating the design of a standardized posture recognition system. The underlying mechanism underlying the pressure ratio is discussed from the aspect of biomechanics of movement.
Get full access to this article
View all access options for this article.
References
Supplementary Material
Please find the following supplemental material available below.
For Open Access articles published under a Creative Commons License, all supplemental material carries the same license as the article it is associated with.
For non-Open Access articles published, all supplemental material carries a non-exclusive license, and permission requests for re-use of supplemental material or any part of supplemental material shall be sent directly to the copyright owner as specified in the copyright notice associated with the article.
