Reconstruction of severe acetabular bone defects with porous metal augment in total hip arthroplasty: A finite element analysis study

Abstract

This study aims to evaluate the reconstructive stability for Paprosky III acetabular defects after total hip arthroplasty using three different reconstruction strategies with trabecular metal (TM) augments. The acetabular bone defects examined were located in the ilium, the sciatic ramus and the pubic ramus. Different scenarios of acetabular reconstructions were simulated, including the non-reconstruction model (NRM), the complete reconstruction model (CRM), the two-point reconstruction model (TRM) and the superior edge reconstruction model (SRM). A primary hip replacement model (HRM) was also investigated to compare the initial stability with different reconstruction models. The gait cycle was incorporated in the model to investigate the dynamic variation within the contact mechanics parameters. By comparing the SRM and the TRM, the acetabular cup translation was more pronounced when the superior defect on the acetabulum remained unfixed. Comparison of the acetabular cup displacement and the interface micromotion of both HRM and CRM demonstrated that the prosthetic implant provided good support for the reconstructed acetabulum. With the use of a press-fit cup, the cup displacement was reduced remarkably, while its Von-Mises stress increased significantly. The results show that the CRM was the best reconstruction option. In terms of acetabular defects, future improvements should focus on the reconstructive stability in stress concentration areas, to ensure no significant stress-shielding or other factors contributing to loosening of the prosthesis.