A finite element study on intra-operative corrective forces and evaluation of screw density in scoliosis surgeries

Abstract

Scoliosis is an abnormal sideways curvature of the spine and rib cage, which may need surgical treatments. Most of the corrective maneuvers in scoliosis surgeries are based on surgeon’s experience; hence, there is great interest of understanding how the correction ratio can be influenced by the magnitude of forces and moments. Therefore, the objective of this study was to develop and validate a detailed finite element model of the thoracolumbar which can be used to simulate the scoliosis surgeries based on patient-specific clinical images. The validated models of five patients were carefully developed, and the surgery procedures were simulated and the corrective forces were estimated using inverse finite element analysis during the surgery. Furthermore, parametric studies including the influences of the corrective force magnitude and screw density were evaluated. The results showed that the maximum estimated correction force and moment were 173 (±55.43) N and 10.67 (±2.02) N m, respectively, which were aligned with measured clinical observations. The sensitivity analysis on the magnitude of applied force to the screws showed that correction ratio was slightly increased in level 1 (i.e. F_B = 1.3 × F) but decreased in level 2 (i.e. F_B = 1.6 × F). In addition, the parametric study on increasing the number of pedicle screws showed that there was no significant difference between lower and higher screw density. However, the stress distribution was significantly greater using higher screw density during correction maneuvers. In conclusion, this study shows a direct relationship between the applied force/moment and screw density and the correction ratio up to a border line which should be defined accurately. This detailed computational modeling can be used in clinic in hope of achieving the optimum outcome of scoliosis surgery using individual patient-specific characterization.

Keywords

Scoliosis surgery finite element analysis intra-operative corrective forces stress distribution screw density

Get full access to this article

View all access options for this article.

References

Eardley-Harris

Munn

Cundy

et al . The effectiveness of selective thoracic fusion for treating adolescent idiopathic scoliosis: a systematic review protocol. JBI Database System Rev Implement Rep 2015; 13: 4–16.

Ohrt-Nissen

Dahl

Gehrchen

Choice of rods in surgical treatment of adolescent idiopathic scoliosis: what are the clinical implications of biomechanical properties?—a review of the literature. Neurospine 2018; 15: 123–130.

Dubousset

Chopin

Seringe

Have we made true progress in surgical indications and determining the limitations of spinal fusion in patients with idiopathic scoliosis?

Orthop Traumatol Surg Res 2018; 104: 555–556.

Fischer

Kim

Selective fusion for adolescent idiopathic scoliosis: a review of current operative strategy. Eur Spine J 2011; 20: 1048–1057.

Kuroki

Brace treatment for adolescent idiopathic scoliosis. J Clin Med 2018; 7: 136.

Akbarnia

Fogarty

Smith

Jr.

New trends in surgical stabilization of thoraco-lumbar spinal fractures with emphasis for sublaminar wiring. Paraplegia 1985; 23: 27–33.

Hongo

Ilharreborde

Gay

et al . Biomechanical evaluation of a new fixation device for the thoracic spine. Eur Spine J 2009; 18: 1213–1219.

Demir

Camuscuz

Design and performance of spinal fixation pedicle screw system. Proc IMechE, Part H: J Engineering in Medicine 2012; 226: 33–40.

Fairhurst

Little

Adam

. The measurement of applied forces during anterior single rod correction of adolescent idiopathic scoliosis. In: Proceedings of the Adelaide Centre for Spinal Research (ACSR)—spinal research symposium VII, Adelaide, SA, Australia, 25–27 August 2009. Queensland University of Technology (QUT) E-Prints.

10.

Wang

Larson

Crandall

et al . Biomechanical effect of pedicle screw distribution in AIS instrumentation using a segmental translation technique: computer modeling and simulation. Scoliosis Spinal Disord 2017; 12: 13.

11.

Bharucha

Lonner

Auerbach

et al . Low-density versus high-density thoracic pedicle screw constructs in adolescent idiopathic scoliosis: do more screws lead to a better outcome?Spine J 2013; 13: 375–381.

12.

Wang

Aubin

Larson

et al . Biomechanical analysis of pedicle screw density in spinal instrumentation for scoliosis treatment: first results. Stud Health Technol Inform 2012; 176: 303–306.

13.

Kim

Lee

Chae

SW.

Biomechanical analysis of pedicle screw instrumentation in a thoracic scoliosis spine finite element model. Open Spine J 2010; 2: 1–7.

14.

Watanabe

Nakamura

Iwanami

et al . Vertebral derotation in adolescent idiopathic scoliosis causes hypokyphosis of the thoracic spine. BMC Musculoskelet Disord 2012; 13: 99.

15.

Chang

Lenke

LG.

Vertebral derotation in adolescent idiopathic scoliosis. Oper Techn Orthop 2009; 19: 19–23.

16.

Di Silvestre

Lolli

Bakaloudis

et al . Apical vertebral derotation in the posterior treatment of adolescent idiopathic scoliosis: myth or reality?Eur Spine J 2013; 22: 313–323.

17.

Lou

Hill

Raso

et al . Instrumented rod rotator system for spinal surgery. Med Biol Eng Comput 2002; 40: 376–379.

18.

Aubin

Labelle

Chevrefils

et al . Preoperative planning simulator for spinal deformity surgeries. Spine 2008; 33: 2143–2152.

19.

Gohari

Nikkhoo

Haghpanahi

et al . Analysis of different material theories used in a FE model of a lumbar segment motion. Acta Bioeng Biomech 2013; 15: 33–41.

20.

Khalaf

Nikkhoo

El-Rich

et al . Development of a parametric subject-specific finite element model to investigate the lumbar spine response before and after one-level posterior fusion. In: Proceedings of the 8th world congress of biomechanics, Dublin, 8–12 July 2018. Oxford Abstracts Ltd.

21.

Nikkhoo

Haghpanahi

Parnianpour

et al . Dynamic responses of intervertebral disc during static creep and dynamic cyclic loading: a parametric poroelastic finite element analysis. Biomed Eng: Appl Bas C 2013; 25: 1350013.

22.

Gohari

Haghpanahi

Parnianpour

et al . Numerical analysis (finite element method) of brace effects on the adolescent idiopathic scoliosis during 24 hours. Biomed Eng: Appl Bas C 2014; 26: 1450046.

23.

Nikkhoo

Haghpanahi

Wang

et al . A poroelastic finite element model to describe the time-dependent response of lumbar intervertebral disc. J Med Imag Health In 2011; 1: 246–251.

24.

Ritzel

Amling

Posl

et al . The thickness of human vertebral cortical bone and its changes in aging and osteoporosis: a histomorphometric analysis of the complete spinal column from thirty-seven autopsy specimens. J Bone Miner Res 1997; 12: 89–95.

25.

AmjadiKashani

Nikkhoo

Khalaf

et al . An in silico parametric model of vertebrae trabecular bone based on density and microstructural parameters to assess risk of fracture in osteoporosis. Proc IMechE, Part H: J Engineering in Medicine 2014; 228: 1281–1295.

26.

Hsu

Kuo

Chang

et al . Rheological and dynamic integrity of simulated degenerated disc and consequences after cross-linker augmentation. Spine 2013; 38: E1446–E1453.

27.

Schmidt

Heuer

Simon

et al . Application of a new calibration method for a three-dimensional finite element model of a human lumbar annulus fibrosus. Clin Biomech 2006; 21: 337–344.

28.

Rohlmann

Zander

Schmidt

et al . Analysis of the influence of disc degeneration on the mechanical behaviour of a lumbar motion segment using the finite element method. J Biomech 2006; 39: 2484–2490.

29.

Schmidt

Heuer

Drumm

et al . Application of a calibration method provides more realistic results for a finite element model of a lumbar spinal segment. Clin Biomech 2007; 22: 377–384.

30.

Ruberte

Natarajan

Andersson

GB.

Influence of single-level lumbar degenerative disc disease on the behavior of the adjacent segments: a finite element model study. J Biomech 2009; 42: 341–348.

31.

Nikkhoo

Hsu

Y-C

Haghpanahi

et al . A meta-model analysis of a finite element simulation for defining poroelastic properties of intervertebral discs. Proc IMechE, Part H: J Engineering in Medicine 2013; 227: 672–682.

32.

Ziv

Maroudas

Robin

et al . Human facet cartilage: swelling and some physicochemical characteristics as a function of age. Spine 1993; 18: 136–146.

33.

Panjabi

Oxland

Yamamoto

et al . Mechanical behavior of the human lumbar and lumbosacral spine as shown by three-dimensional load-displacement curves. J Bone Joint Surg 1994; 76: 413–424.

34.

Guvenc

Akyoldas

Senturk

et al . How to reduce stress on the pedicle screws in thoracic spine? Importance of screw trajectory: a finite element analysis. Turk Neurosurg. Epub ahead of print 25 December 2017. DOI: 10.5137/1019-5149.JTN.21895-17.2.

35.

Ahn

Chen

Lee

et al . Comparison of the load-sharing characteristics between pedicle-based dynamic and rigid rod devices. Biomed Mater 2008; 3: 044101.

36.

Thesleff

The effect of anesthetic agents on skeletal muscle membrane. Acta Physiol Scand 1956; 37: 335–349.

37.

Ginz

Zorzato

Iaizzo

et al . Effect of three anaesthetic techniques on isometric skeletal muscle strength. Br J Anaesth 2004; 92: 367–372.

38.

Nikkhoo

Wang

Abdollahi

et al . A regenerative approach towards recovering the mechanical properties of degenerated intervertebral discs: genipin and platelet-rich plasma therapies. Proc IMechE, Part H: J Engineering in Medicine 2017; 231: 127–137.

39.

Nikkhoo

Wang

Parnianpour

et al . Biomechanical response of intact, degenerated and repaired intervertebral discs under impact loading—ex-vivo and in-silico investigation. J Biomech 2018; 70: 26–32.