Body-powered prostheses are known for their advantages of cost, reliability, training period, maintenance, and proprioceptive feedback. This study primarily aims to analyze the work related to the improvement of upper limb body-powered prostheses prior to 2016. A systematic review conducted via the search of the Web of Science electronic database, Google Scholar, and Google Patents identified 155 papers from 1921 to 2016. Sackett’s initial rules of evidence were used to determine the levels of evidence, and only papers categorized in the design and development category and patents were analyzed. A total of 40 papers in the sixth level of “Design and Development” of an upper limb body-powered prosthesis were found. Approximately 81% were categorized under mechanical alteration. Most papers were patent-type documents (48%), with the Journal of Rehabilitation Research and Development publishing most of the articles related to the design and development of body-powered prostheses. Papers in the scope of the study were published once every 3 years in almost a century, proving that only a few studies were conducted to improve body-powered arms compared with myoelectric technology. Further research should be carried out mainly in areas that have received less attention.
CarlsonLE.Improved control of body-powered prehension. J Prosthet Orthot1999.
20.
CupoMESheredosSJ.Clinical evaluation of the modular electromechanical lock actuator (MELA) for above-elbow prostheses: a final report. J Rehabil Res Dev1996; 33: 56–67.
21.
KitayamaIMatsudaMNakajimaSet al. Improvement of control cable system of trans-humeral body-powered prostheses. Prosthet Orthot Int1999; 23: 123–129.
FreyDCarlsonL.A body powered prehensor with variable mechanical advantage. Prosthet Orthot Int1994; 18: 118–123.
31.
De VisserHHerderJL. Force-directed design of a voluntary closing hand prosthesis. J Rehabil Res Dev2000; 37: 261–271.
32.
SitekAJYamaguchiGTHerringDEet al. Development of an inexpensive upper-extremity prosthesis for use in developing countries. J Prosthet Orthot2004; 16: 94–102.
33.
WinfreyRC.Prosthetic hand having a conformal, compliant grip and opposable, functional thumb. US7361197-B2 Patent, 2008.
34.
VeatchBDScottJD.Prehensor device and improvements of same. US7341295-B1 Patent, 2008.
35.
JohnsonAPVeatchB.Upper-extremity prostheses: a renewed approach. In: Proceedings of the international design engineering technical conferences and computers and information in engineering conference, San Diego, CA, 30 August–2 September 2009, pp.649–656. New York: The American Society of Mechanical Engineers.
VeatchBD.Prosthetic split hook terminal device with adjustable pinch force, functional grasping contours and illumination. US8052761-B2 Patent, 2011.
38.
BarilMLalibertéTGosselinCet al. On the design of a mechanically programmable underactuated anthropomorphic prosthetic gripper. J Mech Des2013; 135: 121008.
39.
LiarokapisMVZisimatosAGBousiouMNet al. Open-source, low-cost, compliant, modular, underactuated fingers: towards affordable prostheses for partial hand amputations. In: Proceedings of the 36th annual international conference of the IEEE engineering in medicine and biology society, Chicago, IL, 26–30 August 2014, pp.2541–2544. New York: IEEE.
40.
SensingerJ.Gripping device with switchable opening modes. US20140081425-A1 Patent, 2014.
41.
SmitGPlettenburgDHVan Der HelmFC.The lightweight delft cylinder hand: first multi-articulating hand that meets the basic user requirements. IEEE Trans Neural Syst Rehabi Eng2015; 23: 431–440.
CupoMSheredosS.Clinical evaluation of the modular electromechanical lock actuator for above-elbow prostheses: a preliminary report. J Rehabil Res Dev1993; 31: 148–152.
47.
VeatchBDRadocyR.Hybridizing body power & batteries: development of the electromechanical sure-lok cable control system. In: Proceedings of the myoelectric symposium, New Brunswick, Canada, 14–19 August 2011. University of New Brunswick.
48.
LatourDA.Method for anchoring prosthetic and orthotic devices. US8821588-B2 Patent, 2014.
49.
MustafaSKYangGYeoSHet al. Development of a bio-inspired wrist prosthesis. In:Proceedings of the IEEE conference on robotics, automation and mechatronics, Bangkok, Thailand, 1–3 June 2006, p.16. New York: IEEE.
50.
RouseJHFarquharsonRHBettsCG.Multi-function body-powered prosthetic wrist unit and method. US7048768-B1 Patent, 2006.
51.
RazakNAAOsmanNAAGholizadehHet al. Development and performance of a new prosthesis system using ultrasonic sensor for wrist movements: a preliminary study. Biomed Eng Online2014; 13: 49.
52.
Le GDO. Artificial arm and hand. US1225415-A Patent, 1921.
53.
LandsbergerSShapermanJSetoguchiYet al. Child prosthetic hand design: no small challenge. In: Proceedings of the WESCON/96, Anaheim, CA, 22–24 October1996, pp.236–140. New York: IEEE.
TolouNSmitGNikooyanAAet al. Stiffness compensation mechanism for body powered hand prostheses with cosmetic covering. J Med Devices2012; 6: 011004.
60.
ChuaLKMartinezJACelikO.Haptic body-powered upper-extremity prosthesis simulator with tunable stiffness and sensitivity. In: Proceedings of the IEEE haptics symposium, Houston, TX, 23–26 February 2014, pp.545–159. New York: IEEE.
