A computer-aided system for automatic extraction of femur neck trabecular bone architecture using isotropic volume construction from clinical hip computed tomography images

Abstract

Hip fractures due to osteoporosis are increasing progressively across the globe. It is also difficult for those fractured patients to undergo dual-energy X-ray absorptiometry scans due to its complicated protocol and its associated cost. The utilisation of computed tomography for the fracture treatment has become common in the clinical practice. It would be helpful for orthopaedic clinicians, if they could get some additional information related to bone strength for better treatment planning. The aim of our study was to develop an automated system to segment the femoral neck region, extract the cortical and trabecular bone parameters, and assess the bone strength using an isotropic volume construction from clinical computed tomography images. The right hip computed tomography and right femur dual-energy X-ray absorptiometry measurements were taken from 50 south-Indian females aged 30–80 years. Each computed tomography image volume was re-constructed to form isotropic volumes. An automated system by incorporating active contour models was used to segment the neck region. A minimum distance boundary method was applied to isolate the cortical and trabecular bone components. The trabecular bone was enhanced and segmented using trabecular enrichment approach. The cortical and trabecular bone features were extracted and statistically compared with dual-energy X-ray absorptiometry measured femur neck bone mineral density. The extracted bone measures demonstrated a significant correlation with neck bone mineral density (r > 0.7, p < 0.001). The inclusion of cortical measures, along with the trabecular measures extracted after isotropic volume construction and trabecular enrichment approach procedures, resulted in better estimation of bone strength. The findings suggest that the proposed system using the clinical computed tomography images scanned with low dose could eventually be helpful in osteoporosis diagnosis and its treatment planning.

Keywords

Osteoporosis femur bone segmentation cortical thickness trabecular bone architecture image processing isotropic volume active contour model morphological parameters bone strength trabecular enrichment approach (TEA)

Get full access to this article

View all access options for this article.

References

Kanis

Delmas

Burckhardt

. Guidelines for diagnosis and management of osteoporosis. Osteoporos Int 1997; 7(4): 390–406.

Cooper

Melton

LJ.

Hip fractures in the elderly: a worldwide projection. Osteoporos Int 1992; 2: 285–289.

Kanis

Oden

Johnell

. The use of clinical risk factors enhances the performances of BMD in the prediction of hip and osteoporotic fractures in men and women. Osteoporos Int 2007; 18: 1033–1046.

Cheng

Levy

Lefaivre

. Geographic trends in incidence of hip fractures: a comprehensive literature review. Osteoporos Int 2011; 22(10): 2575–2586.

Link

Vieth

Langenberg

. Structure analysis of high resolution magnetic resonance imaging of the proximal femur: in vitro correlation with biomechanical strength and BMD. Calcif Tissue Int 2003; 72(2): 156–165.

Bauer

Kohlmann

Eckstein

. Structural analysis of trabecular bone of the proximal femur using multislice computed tomography: a comparison with dual X-ray absorptiometry for predicting biomechanical strength in vitro. Calcif Tissue Int 2006; 78(2): 78–89.

Akgundogdu

Jennane

Aufort

. 3D image analysis and artificial intelligence for bone disease classification. J Med Syst 2010; 34(5): 815–828.

Showalter

Clymer

Richmond

. Three dimensional texture analysis of cancellous bone cores evaluated at clinical CT resolutions. Osteoporos Int 2006; 17: 259–266.

Issever

Vieth

Lotter

. Local differences in the trabecular bone structure of the proximal femur depicted with high-spatial-resolution MR imaging and multisection CT. Acad Radiol 2002; 9(12): 1395–1406.

10.

Link

Majumdar

Lin

. A comparative study of trabecular bone properties in the spine and femur using high resolution MRI and CT. J Bone Miner Res 1998; 13(1): 122–132.

11.

Sapthagirivasan

Anburajan

Janarthanam

Extraction of 3D femur neck trabecular bone architecture from clinical CT images in osteoporotic evaluation: a novel framework. J Med Syst 2015; 39(8): 81.

12.

Majumdar

Genant

Grampp

. Correlation of trabecular bone structure with age, bone mineral density and osteoporotic status: in vivo studies in the distal radius using high resolution magnetic resonance imaging. J Bone Miner Res 1997; 12: 111–118.

13.

Baum

Carballido-Gamio

Huber

. Automated 3D trabecular bone structure analysis of the proximal femur–prediction of biomechanical strength by CT and DXA. Osteoporos Int 2010; 21(9): 1553–1564.

14.

Newitt

Rietbergen

Majumdar

Processing and analysis of in vivo high-resolution MR images of trabecular bone for longitudinal studies: reproducibility of structural measures and micro-finite element analysis derived mechanical properties. Osteoporos Int 2002; 13(4): 278–287.

15.

Bousson

LeBras

Roqueplan

. Volumetric quantitative computed tomography of the proximal femur: relationships linking geometric and densitometric variables to bone strength-role for compact bone. Osteoporos Int 2006; 17: 855–864.

16.

Soret

Bacharach

Buvat

Partial-volume effect in PET tumor imaging. J Nucl Med 2007; 48(6): 932–945.

17.

Meema

Cortical bone mineral density versus cortical thickness in the diagnosis of osteoporosis: a roentgenologic-densitometric study. J Am Geriatr Soc 1969; 17(2): 120–141.

18.

Poole

Treece

Mayhew

. Cortical thickness mapping to identify focal osteoporosis in patients with hip fracture. PLoS ONE 2012; 7(6): e38466.

19.

Kanis

Melton

Christiansen

. The diagnosis of osteoporosis. J Bone Miner Res 2004; 9: 1137–1141.

20.

Hefnawy

AA.

An efficient super-resolution approach for obtaining isotropic 3-D imaging using 2-D multi-slice MRI. Egypt Inform J 2013; 14(2): 117–123.

21.

Lekien

Marsden

Interpolation in three dimensions. J Numer Method Eng 2005; 63: 455–471.

22.

Kass

Witkin

Terzopoulos

Snakes: active contour models. Int J Comput Vis 1988; 1(4): 321–331.

23.

Wai-Pak

Kin-Man

Wan-Chi

An adaptive active contour model for highly irregular boundaries. Pattern Recogn 2001; 34(2): 323–331.

24.

Sapthagirivasan

Anburajan

Diagnosis of osteoporosis by extraction of trabecular features from hip radiographs using support vector machine: an investigation panorama with DXA. Comput Biol Med 2013; 43(11): 1910–1919.

25.

Levoy

Display of surfaces from volume data. IEEE Comput Graph 1988; 8(3): 29–37.

26.

Guo

Hall

RW.

Parallel thinning with two sub-iteration algorithms. Comm ACM 1989; 32(3): 359–373.

27.

Rutovitz

Pattern recognition. J R Stat Soc A 1966; 129(4): 504–530.

28.

Link

Vieth

Stehling

. High-resolution MRI vs. multislice spiral CT: which technique depicts the trabecular bone structure best?Eur Radiol 2003; 13(4): 663–671.

29.

Link

Majumdar

Lin

. Assessment of trabecular structure using high resolution CT images and texture analysis. J Comput Assist Tomogr 1998; 22: 15–24.

30.

Hotca

Ravichandra

Mikheev

. Precision of volumetric assessment of proximal femur internal architecture from high-resolution 3T MRI. Int J Comput Assist Radiol Surg 2015; 10(1): 35–43.

31.

Brenner

Eric

Hall

EJ.

Computed tomography: an increasing source of radiation exposure. N Engl J Med 2007; 357: 2277–2284.