A novel four-caster manual vehicle manoeuvring investigation: Higher loading-weights require larger turning spaces

Abstract

Patient-hoists, goods-trolleys and other omni-directional manually operated vehicles are ubiquitous. Yet no substantive, empirically based dynamic analysis has been made of these four-caster vehicles despite manual handling concerns. A relationship between loading-weight and turning space is indicated by theoretical analysis which further shows that this effect is represented by only 11 different manoeuvres. A qualitative account of the theory is presented. These 11 manoeuvres were implemented experimentally. A total of 17 subjects selected a maximum comfortable loading-weight for the four-caster vehicle for each of the 11 manoeuvres. Vehicle displacement and handle forces were measured for different centres of zero velocity. The median loading-weight of the manoeuvre with the highest loading-weight selections was 101% greater than the mean loading-weight of the three manoeuvres with the lowest loading-weight selections. The manoeuvre with the highest loading-weight selections required a larger vehicle turning space: one dimension increased by 37% (173 mm) compared with the three lowest loading-weight selection manoeuvres and the other dimension increased by 17% (130 mm) compared with one of the lowest loading-weight selection manoeuvres. Higher loading-weights require larger turning spaces. These results can contribute to building designs which facilitate safe manual manoeuvring of four-caster vehicles.

Keywords

Caster manoeuvre turning space loading-weight

Get full access to this article

View all access options for this article.

References

Abraham

Johnson

. A quasi-static state examination of handle forces and translational acceleration at impending planar motion for the four-caster manually manoeuvred vehicle. Proc IMechE, Part K: J Multi-Body Dynamics 2010; 224: 143–156.

Ferreira

Boocock

Gray

. Review of the risks associated with pushing and pulling heavy loads. Sheffield: Health and Safety Laboratory, 2004.

Marras

Knapik

Ferguson

. Lumbar spine forces during manoeuvring of ceiling-based and floor-based patient transfer devices. Ergonomics 2009; 52(3): 384–397.

Abel

. Survey of attendant propelled mobile chairs used in hospitals. Health Bull 1983; 41(5): 275–277.

Frank

Abel

. Measurement of the turning, rolling and obstacle resistance of wheelchair castor wheels. J Biomed Eng 1989; 11: 462–466.

Inoue

Fernie

Santaguida

. Measurement of trajectory and push/pull force for maneuvering a wheeled lifting device. In: Proceedings of the RESNA 2000 annual conference, Orlando, FL, 28 June–2 July 2000. Orlando, FL: RESNA.

Hoozemans

MJM

Kuijer

PFM

Kingma

. Mechanical loading of the low back and shoulders during pushing and pulling activities. Ergonomics 2004; 47(1): 1–18.

Al-Eisawi

Kerk

Congleton

. Factors affecting minimum push and pull forces of manual carts. Appl Ergon 1999; 30(3): 235–245.

Wikinson

. Integrating human factors and engineering concepts into trolley design. In: Productivity ergonomics and safety – the total package. Proceedings of the international workplace health and safety forum and the 33rd ergonomics society of Australia conference, Gold Coast, Australia 24–27 November 1997, 1998. Downer ACT 2602: Australia: ESA.

10.

Petzäll

. Transportation with hospital beds. Appl Ergon 2003; 34(4): 383–392.

11.

King

. A comparative evaluation of three supermarket shopping carts. In: Proceedings of the ninth congress of the international ergonomics association, Bournemouth, 2–6 September 1985. London: Taylor & Francis

12.

Kauzlarich

Bruning TE

III

Thacker

. Wheelchair caster shimmy II: damping. J Rehabil Res Dev 2000; 37(3): 305–314.

13.

Kauzlarich

Bruning

Thacker

. Wheelchair caster shimmy and turning resistance. J Rehabil Res Dev 1984; 20(2): 15–29.

14.

Chénier

Bigras

Aissaoui

. An orientation estimator for the wheelchair’s caster wheels. IEEE T Contr Syst T 2011; 19(6): 1317–1326.

15.

Abel

Frank

. The design of attendant propelled wheelchairs. Posthet Orthot Int 1991; 15(1): 38–45.

16.

Abraham

Davidson

Johnson

. Theory and validation of the motion resistance mechanism of four-caster manual vehicles. Proc IMechE, Part K: J Multi-Body Dynamics 2013; 227(3): 313–326.

17.

Center for Inclusive Design and Environmental Access. Anthropometry of wheeled mobility project. New York: IDeA, 2010.

18.

Abraham

. Forces applied and space required relationship for four caster vehicle manoeuvres. PhD Thesis, Newcastle University, UK, 2012.

19.

Meriam

Kraige

. Engineering mechanics dynamics. 7th ed. Hoboken, NJ: John Wiley & Sons Inc., 2012.

20.

Cowan

Nash

Collinger

. Impact of surface type, wheelchair weight, and axle position on wheelchair propulsion by novice older adults. Arch Phys Med Rehabil 2009; 90(7): 1076–1083.

21.

Chaffin

Andersson

GBJ

Martin

. Occupational biomechanics. 4th ed. Hoboken, NJ: Wiley-Interscience, 2006.

22.

Abraham

Davidson

Johnson

. Adaptation planning guideline and constrained outline for shower chairs and other four-caster vehicles. Br J Occup Ther 2013; 76(10): 443–451.

23.

Snook

Ciriello

. The design of manual handling tasks: revised tables of maximum acceptable weights and forces. Ergonomics 1991; 34(9): 1197–1213.

24.

Kumar

Narayan

Bacchus

. Symmetric and asymmetric two-handed pull-push strength of young adults. Human Factors 1995; 37(4): 854–865.