Does surface wettability influence the friction and wear of large-diameter CoCrMo alloy hip resurfacings?

Abstract

The role of surface tension in the lubrication of metal-on-metal (CoCrMo alloy) hip resurfacings has been investigated to try to explain why all metal joints fail to be lubricated with simple water-based lubricants (sodium carboxymethyl cellulose), which have similar rheology to synovial fluid, but are lubricated with the same fluid with the addition of a proportion of bovine serum. As part of this study, surfactants, in the form of detergents, when added to carboxymethyl cellulose, have been shown to produce a predominantly fluid-film lubrication mechanism with friction even lower than the biological lubricant containing serum. Friction factors were reduced by 80% when a detergent was added to the lubricant. It is considered that the failure of the water-based fluids to generate fluid-film lubrication is due to the fact that ‘boundary slip’ takes place where the fluid does not fully attach to the bounding solid surfaces as assumed in Reynolds’ equation, thereby drawing in less lubricant than predicted from hydrodynamic theory. The addition of surfactants either in the form of natural materials such as serum or in the form of detergent reduces surface tension and helps the water-based lubricant to attach more fully to the bounding surfaces resulting in more fluid entrainment and thicker fluid-film formation. This was confirmed by up to 70% lower wear being found when these joints were lubricated in a detergent solution rather than 25% bovine serum.

Keywords

Metal-on-metal lubrication surface tension boundary slip wear in serum wear in detergent solutions

Get full access to this article

View all access options for this article.

References

Vassiliou

Elfick

APD

Scholes

. The effect of ‘running-in’ on the tribology and surface morphology of metal-on-metal Birmingham hip resurfacing device in simulator studies. Proc IMechE, Part H: J Engineering in Medicine 2006; 220(2): 269–277.

Scholes

Smith

Ash

. The lubrication and friction of conventional UHMWPE, novel compliant layer and hard bearing surfaces for use in total hip prostheses. In: Hutchings

(ed.) Friction, lubrication and wear of artificial joints. Professional Engineering Publishing, London, 2003, pp.59–74.

Dowson

Jin

. Metal-on-metal hip joint tribology. Proc IMechE, Part H: J Engineering in Medicine 2006; 220(2): 107–118.

Liu

Jin

Hirt

. Effect of wear of bearing surfaces on elastohydrodynamic lubrication of metal-on-metal hip implants. Proc IMechE, Part H: J Engineering in Medicine 2005; 219(5): 319–328.

Wood

RJK

Taylor

. The tribological behaviour of different clearance MOM hip joints with lubricants of physiological viscosities. Proc IMechE, Part H: J Engineering in Medicine 2011; 225(11): 1061–1069.

Langton

Jameson

Joyce

. Accelerating failure rate of the ASR total hip replacement. J Bone Joint Surg Br 2011; 93(8): 1011–1016.

Langton

Jameson

Joyce

. Early failure of metal-on-metal bearings in hip resurfacing and large diameter total hip replacement. J Bone Joint Surg Br 2010; 92(1): 38–46.

Reynolds

. On the theory of lubrication and its application to Mr. Beauchamp Tower’s experiments, including an experimental determination of the viscosity of olive oil. Philos Trans R Soc London 1886; 177: 157–235.

Bishop

Waldow

Morlock

. Friction moments of large metal-on-metal hip joint bearings and other modern designs. Med Eng Phys 2008; 30: 1057–1064.

10.

Cooke

Dowson

Wright

. The rheology of synovial fluid and synthetic lubricants for degenerate synovial joints. Eng Med 1978; 7: 66–72.

11.

Hamrock

Dowson

. Elastohydrodynamic lubrication of elliptical contacts for materials of low elastic modulus 1 – fully flooded conjunction. J Lubr Technol 1978; 100: 236–245.

12.

Unsworth

Pearcy

White

EFT

. Soft layer lubrication of artificial hip joints. In: Proceedings of the Institution of Mechanical Engineers international conference volume on tribology, Professional Engineering Publishing, London, UK, June 1987, London, UK pp.715–724.

13.

Paul

. Forces transmitted by joints in the human body. Proc Instn Mech Engrs Symposium 1966; 181: 8–15.

14.

Roberts

Unsworth

Mian

. Modes of lubrication in human hip Joints. Ann Rheum Dis 1982; 41: 217–224.

15.

Scholes

Unsworth

Hall

. The effects of material combination and lubricant on the friction of total hip prostheses. In: Proceedings of Institution of Engineers Australia, AUSTRIB’98 – tribology at work, 6th–9th December 1998, Brisbane, Australia pp.311–314. The Institution of Engineers Australia.

16.

Smith

Burgess

Unsworth

. Evaluation of a hip joint simulator. Proc IMechE, Part H: J Engineering in Medicine 1999; 213: 469–473.

17.

Unsworth

. Tribology of artificial hip joints. Proc IMechE, Part J: J Engineering Tribology 2006; 220: 711–718.

18.

Radin

Swann

Weisser

. Separation of a hyaluronate-free lubricating fraction from synovial fluid. Nature 1970; 228: 377–378.

19.

Spikes

. The half-wetted bearing. Part 1 – extended Reynolds equation. Proc IMechE, Part J: J Engineering Tribology 2003; 217: 1–14.

20.

Ehret

Dowson

Taylor

. On the transport conditions in elasto-hydrodynamic conjunctions. Proc R Soc Lond A Math Phys Sci 1998; 454: 763–787.

21.

Hills

. Boundary lubrication in-vivo. Proc IMechE, Part H: J Engineering in Medicine 2000; 214: 83–94.

22.

Bocquet

Barrat

J-L

. Flow boundary conditions from nano-to micro-scales. Soft Matter 2007; 3: 685–693.