An anatomical stem should be short enough to avoid distal locking and distal load transfer but long enough to ensure adequate primary stability of the stem. In this in vitro study, the cortical strains in the femur and the primary stability of the stem were measured after insertion of Anatomic Benoist Girard-I anatomical stems with gradually reduced stem length in six human cadaver femurs in order to find the optimal stem length. A shortening of 40–50 mm, corresponding to a stem extending 30–40 mm below the lesser trochanter, did not affect stem stability but nearly normalized the load distribution in the lower metaphysis and upper diaphysis. The large strain shielding observed in the calcar region was not influenced by shortening of the stem.
MullenderMGHuiskesR. Proposal for the regulatory mechanism of Wolff’s law. J Orthop Res1995; 13(4): 503–512.
2.
FrostHM. A 2003 update of bone physiology and Wolff’s law for clinicians. Angle Orthod2004; 74(1): 3–15.
3.
JastyMO’ConnorDOHenshawRM. Fit of the uncemented femoral component and the use of cement influence the strain transfer the femoral cortex. J Orthop Res1994; 12(5): 648–656.
4.
WalkerPSRobertsonDD. Design and fabrication of cementless hip stems. Clin Orthop Relat Res1988; 235: 25–34.
5.
HerreraACanalesVAndersonJ. Seven to 10 years followup of an anatomic hip prosthesis: an international study. Clin Orthop Relat Res2004; 423: 129–137.
6.
LaineHJPuolakkaTJMoilanenT. The effects of cementless femoral stem shape and proximal surface texture on ‘fit-and-fill’ characteristics and on bone remodeling. Int Orthop2000; 24(4): 184–190.
7.
ToninoAJRahmyAI. The hydroxyapatite-ABG hip system: 5- to 7-year results from an international multicentre study. The International ABG Study Group. J Arthroplasty2000; 15(3): 274–282.
8.
OstbyhaugPOKlaksvikJRomundstadP. An in vitro study of the strain distribution in human femora with anatomical and customised femoral stems. J Bone Joint Surg Br2009; 91(5): 676–682.
9.
AlbaneseCVSantoriFSPavanL. Periprosthetic DXA after total hip arthroplasty with short vs. ultra-short custom-made femoral stems. Acta Orthop2009; 80(3): 291–297.
10.
MorreyBFAdamsRAKesslerM. A conservative femoral replacement for total hip arthroplasty. A prospective study. J Bone Joint Surg Br2000; 82(7): 952–958.
11.
Van der WalBCDe KramerBJGrimmB. Femoral fit in ABG-II hip stems, influence on clinical outcome and bone remodeling: a radiographic study. Arch Orthop Trauma Surg2008; 128(10): 1065–1072.
12.
PilliarRMLeeJMManiatopoulosC. Observations on the effect of movement on bone ingrowth into porous-surfaced implants. Clin Orthop Relat Res1986; 208: 108–113.
13.
SoballeKHansenESBrockstedt-RasmussenH. Tissue ingrowth into titanium and hydroxyapatite-coated implants during stable and unstable mechanical conditions. J Orthop Res1992; 10(2): 285–299.
14.
BobynJDMortimerESGlassmanAH. Producing and avoiding stress shielding. Laboratory and clinical observations of noncemented total hip arthroplasty. Clin Orthop Relat Res1992; 274: 79–96.
15.
SumnerDRGalanteJO. Determinants of stress shielding: design versus materials versus interface. Clin Orthop Relat Res1992; 274: 202–212.
16.
McLeishRDCharnleyJ. Abduction forces in the one-legged stance. J Biomech1970; 3(2): 191–209.
17.
AamodtALund-LarsenJEineJ. Changes in proximal femoral strain after insertion of uncemented standard and customised femoral stems. An experimental study in human femora. J Bone Joint Surg Br2001; 83(6): 921–929.
18.
OstbyhaugPOKlaksvikJRomundstadP. Primary stability of custom and anatomical uncemented femoral stems: a method for three-dimensional in vitro measurement of implant stability. Clin Biomech (Bristol, Avon)2010; 25(4): 318–324.
19.
BlandJMAltmanDG. Multiple significance tests: the Bonferroni method. BMJ1995; 310(6973): 170.
20.
BergmannGDeuretzbacherGHellerM. Hip contact forces and gait patterns from routine activities. J Biomech2001; 34(7): 859–871.
21.
HuiskesR. Failed innovation in total hip replacement. Diagnosis and proposals for a cure. Acta Orthop Scand1993; 64(6): 699–716.
22.
Van RietbergenBHuiskesR. Load transfer and stress shielding of the hydroxyapatite-ABG hip: a study of stem length and proximal fixation. J Arthroplasty2001; 16(8 Suppl. 1): 55–63.
23.
JastyMBragdonCBurkeD. In vivo skeletal responses to porous-surfaced implants subjected to small induced motions. J Bone Joint Surg Am1997; 79(5): 707–714.
24.
TaylorMTannerKEFreemanMA. Cancellous bone stresses surrounding the femoral component of a hip prosthesis: an elastic-plastic finite element analysis. Med Eng Phys1995; 17(7): 544–550.
