In the current research, a method for estimation of the durability of a structure based on an integrated calculation of static and fatigue strength according to the criterion of allowable strain is presented. The proposed technique is demonstrated for the upper stringer panel of the wing design. In the course of calculations, several combinations of design service objectives, levels of allowable strains, and levels of cyclic stresses were considered. As a result, the relative values of stiffness degradation and the required safety ratios of static strength were obtained.
GrinevichDYakovlevNSlavinA. The criteria of the failure of polymer matrix composites (review). Proceedings of VIAM. 2019; 7(79): 92–111.
2.
KomarovVKurkinESpirinaM. Use of the multilevel approach in the design of the spatial structures from short-fibrers reinofoced composites. Samara: Izvestiya of Samara Scientific Center of the Russian Academy of Sciences, 2017.
3.
Hart-SmithL. The truncated maximum strain composite failure model. Composites. 1993; 24(7): 587–591. doi:10.1016/0010-4361(93)90273-B.
4.
PanellaFPirinuA. Fatigue and damage analysis on aeronautical CFRP elements under tension and bending loads: two cases of study. Int J Fatig. 2021; 152: 106403. doi:10.1016/j.ijfatigue.2021.106403.
GunyaevGChursovaLKomarovaO, et al.Structural polymer carbon-nano-composites – new stream in material science. Web scientific journal “VIAM works” VIAM 2011-2057942011.
7.
BurhanIKimH. S-N curve models for composite materials characterisation: an evaluative review. J. Compos. Sci. 2018; 2(38): 38.
8.
StrizhiusV.Methods for approximate estimates of fatigue life of typical elements of composite aircraft structures. Civil Aviation High Technologies. 2015; 211: 23–28.
9.
MaierJArbeiterFStelzerS, et al.Stiffness based fatigue characterisation of CFRP. Adv Mater Res2014; 891-892: 166–171. DOI: 10.4028/www.scientific.net/AMR.891-892.166.
10.
ReifsniderK. Chapter 2 - damage and damage mechanics. In: ReifsniderKL (ed) Comp. Mat. Ser. Amsterdam: Elsevier, 1991, 4, pp. 11–77.
11.
StrizhiusV. Predicting the degradation of the residual strength in cyclic loading of layered composites. Mech Compos Mater2022; 58: 527–536. DOI: 10.1007/s11029-022-10047-w.
12.
ShokriehMLessardL. Progressive fatigue damage modeling of composite materials. Part I: modeling. Journal of Composite Materials, 2000, 34, pp. 1056–1080.
13.
Van PaepegemW. Development and finite element implementation of a damage model for fatigue of fibre-reinforced polymers. Ghent: Ghent University, 2002. Ph.D. thesishttps://hdl.handle.net/1854/LU-153455.
14.
FejgenbaumYDubinskijSBozhevalovD, et al. Ensuring the strength of composite aircraft structures taking into account random operational impact impacts. Moscow: TECHNOSPHERE, 2018.
15.
RouchonJ-FBosMJ. Fatigue and damage tolerance evaluation of structures: the composite materials response. Amsterdam: National Aerospace Laboratory NLR, 2009.
NijssenR.Phenomenological fatigue analysis and life modelling, Fatigue life prediction of composites and composite structures. by Vassilopoulos AP (ed) Sawston.Woodhead Publishing Limited and CRC Press LLC; 2010.
19.
JainAVerpoestIHackM, et al.Fatigue life simulation on fiber reinforced composites - overview and methods of analysis for the automotive industry. SAE Int J Mater Manf2012; 5: 205–214. DOI: 10.4271/2012-01-0730.
20.
Carrella-PayanDMagnevilleBHackM, et al.Implementation of fatigue model for unidirectional laminate based on finite element analysis. Theor Pract2016; 10.
21.
TuronACostaJCamanhoP, et al. Simulation of delamination in composites under high-cycle fatigue. Composites Part A. 2007; 38(11): 2270–2282.
22.
KassapoglouC. Modeling the effect of damage in composite structures: simplified approaches. Hoboken, NJ: John Wiley & Sons, 2015. DOI: 10.1002/9781119013228.
23.
NikitinIBuragoNNikitinA, et al. On kinetic model of damage development. Procedia Struct Integr. 2020; 28: 2032–2042.
24.
MirzaeiAShokriehM. Progressive fatigue damage modeling of laminated composites using strain-based failure criteria. J Compos Mater. 2024; 58(4): 519–531.
25.
DudchenkoA. Strength and design of aircraft structures elements made of composite materials. Moscow: MAI, 2000.
MindlinR.Influence of rotatory inertia and shear on flexural motions of isotropic, elastic plates. ASME J. of App. Mech. 1951; 18: 31–38.
28.
ReissnerE. The effect of transverse shear deformation on the bending of elastic plates. ASME J. of Appl. Mech1945; 12: 68–77.
29.
ZienkewiczO.The finite element method in engineering science. London: McGraw-Hill, 1971.
30.
PanteleevATurbinNNadorovI.Application of bioinspired global optimization algorithms in the problem of selecting coefficients for a model of fatigue stiffness degradation of a composite material. Modeling and Data Analysis. 2024; 14(1): 103–120.
