Design and characterizing of blower wind tunnel using experimental and numerical simulation

Abstract

A new subsonic blower wind tunnel design has been studied both numerically and experimentally; it is also referred to as “blower” wind tunnel. This paper is initially aimed to address each sequential stage of the wind tunnel design process. Rather than applying the standard method of modelling solely the flow in the test section, a large-scale CFD model of the whole wind tunnel was employed. The loss of every constituent element was calculated and then all the losses are added up to determine the power needed for the wind tunnel operation which is used as “intake fan” boundary conditions in the CFD model. Then, flow uniformity and turbulent intensity measurements in an empty test section using a pitot static tube and hot wire anemometer (HWA) were introduced to validate the CFD results. The results showed that flow quality was significantly affected by flow conditioners (uniformity devices) (honeycomb and mesh screens) in the settling chamber and wide-angle diffuser. Investigations were also conducted to evaluate the flow deficit in the wake area behind a convex hump model using both HWA and particle image velocimetry PIV. This was additional experimental tests carried out to validate the suitability of the wind tunnel designed for aerodynamic research.

Keywords

blower wind tunnel design CFD boundary layer controller turbulent intensity validation power spectral density particle image velocimetry

Get full access to this article

View all access options for this article.

References

Barlow

Rae

Pope

. Low-speed wind tunnel testing. Hoboken, NJ: John Wiley & Sons, 1999, DOI: 10.1017/S0001924000025379

Azzawi

Mao

Jaworski

. Design, fabrication and characterization of low speed open-jet wind tunnel, In: Proceedings of World Congress on Engineering. London, UK: Newswood Limited, 2016, pp. 883–888.

Azzawi

Hasan

. Comparison and optimization design methodology for open-loop subsonic wind tunnel. International scientific conference of engineering sciences-3rd scientific conference of Engineering Science (ISCES) Diyala, Iraq. 2018 Jan 10 (pp. 186-191). IEEE. 10.1109/ISCES.2018.8340551

Mehta

Bradshaw

. Design rules for small low speed wind tunnels. Aeronaut J 1979; 83(827): 443–453, DOI: 10.1017/S0001924000031985

Sathapornnanon

Wattanawanichakorn

Trakulmaipol

, et al. The design and development of the fmrl 60 x 18 cm2 wide-angle screened-diffuser blower tunnel, part ii: the screened diffuser. In: Proceeding of the 13th National Mechanical Engineering Conference 2-3 December 1999, Thailand, 1999, pp. 2–3.

Clauser

. Turbulent boundary layers in adverse pressure gradients. J Aeronaut Sci 1954; 21(2): 91–108, DOI: 10.2514/8.2938

Westphal

Eaton

Pauley

. Interaction between a vortex and a turbulent boundary layer in a streamwise pressure gradient. In Turbulent Shear Flows 5: Selected Papers from the Fifth International Symposium on Turbulent Shear Flows, Cornell University, Ithaca, New York, USA, (pp. 266-277). Springer Berlin Heidelberg. DOI: 10.1007/BF00193423

Schwarz

Bradshaw

. Measurements in a pressure-driven three-dimensional turbulent boundary layer during development and decay. AIAA journal 1993; 31(7): 1207–1214.

Calautit

Chaudhry

Hughes

, et al. A validated design methodology for a closed-loop subsonic wind tunnel. J Wind Eng Ind Aerod 2014; 125: 180–194. DOI: 10.1016/j.jweia.2013.12.010

10.

Nader

dos Santos

Jabardo

, et al. Characterization of low turbulence wind tunnel. InXVIII IMEKO World Congress-Metrology for a sustainable development. São Paulo, Brazi: Instituto de Pesquisas Tecnológicas do Estado de São Paulo, 2014, pp. 17–22, https://www.imeko.org/index.php/imeko-news-events/world-congresses/200-imeko-xviii.

11.

Mehta

. The aerodynamic design of blower tunnels with wide-angle diffusers. Prog Aero Sci 1979; 18: 59–120.

12.

Barlow

Rae

Pope

. Low speed wind tunnel testing. INCAS Bulletin 2015; 7(1): 133.

13.

FLUENT Incorporated: FLUENT . Available from: www1.ansys.com (accessed 01.02.12),2022.

14.

Gartmann

Fister

Schwanghart

, et al. CFD modelling and validation of measured wind field data in a portable wind tunnel. Aeolian Research 2011; 3(3): 315–325.

15.

Moonen

Blocken

Roels

, et al. Numerical modeling of the flow conditions in a closed-circuit low-speed wind tunnel. J Wind Eng Ind Aerod 2006; 94(10): 699–723.

16.

The engineering toolbox: roughness and surface coefficients of ventilation ducts. Available from: http://www.engineeringtoolbox.com (accessed 01.02.2022).

17.

Smith

. Pertubation of vortex wakes for amelioration of the vortex wake hazard (Doctoral dissertation. London: Imperial College London (University of London)), 2003.

18.

Chong

Joseph

Davies

, “Design and characterization of a quiet, low turbulence open jet blow down wind tunnel in ISVR,” ISVR technical report No. 322. Southampton, UK: University of Southampton, 2008.