Numerical study on detonation initiation process in the chamber with characteristic structures of the dual-mode scramjet combustor

Abstract

In order to improve the performance of traditional ramjet, a ramjet based on pulse detonation (PD-Ramjet) instead of isobaric combustion was proposed. Several special-shaped detonation chambers which retained the characteristic structures of the dual-mode scramjet combustor were designed. Characteristic structures included the expansion channel and the cavity. The filling process and detonation initiation process of the stoichiometric hydrogen/air mixture under the incoming flow condition of the sub-combustion mode were studied in the detonation chambers with characteristic structures by two-dimensional numerical simulation method, and the influences of the characteristic structures on the filling process and detonation initiation process were analyzed. The simulation and analysis results indicated that the hydrogen concentration at both sides of the chamber near the outlet was low due to the structure of the expansion channel, and the pressure and velocity of the detonation wave decreased gradually after the expansion channel. The cavity had a significant influence on the filling process, which resulted in the uneven hydrogen concentration downstream the cavity, especially near the outlet of the chamber. The intensity of the detonation wave attenuated to a certain extent by reason of the cavity, where the peak pressure first decayed due to the sudden expansion of the flow path and then rose owing to the reflection at the cavity aft wall.