The influence of the inlet swirling flow on the regression rate of the fuel in the combustion chamber of the solid fuel ramjet is investigated in this study using numerical simulations. The finite-volume solver of the compressible turbulent reacting flow is developed to study the flow field where the burning rate is computed using the conjugate heat transfer method for the solid fuel. The correlation is found for the maximum regression rate versus an imposed inlet swirl when the linear distribution of the circumferential velocity is applied at the inlet stream. Although the regression rate augmentation is considerable due to the swirling flow field in the combustor, it is shown that the swirl is effective if is applied near the shear layer of the backstep flow in the combustor. The modified swirler with short blades is suggested to be used in solid fuel ramjets to increase the regression rate of the fuel and improve the performance, but with lower pressure loss.
NetzerDW. “Modeling solid fuel ramjet combustion”. Journal of Spacecraft and Rocket1977; 14(12): 762–766.
2.
SchadowKCCordesHFChiezeDJ. “Experimental studies of combustion processes in a tubular combustor with fuel addition along the wall”. Combustion Science and Technology1978; 19: 51–57.
3.
MetochianakisMENetzerDW. “Modeling solid fuel ramjet combustion, including radiation to the fuel surface”. Journal of Spacecraft and Rocket1983; 20(4): 405–406.
4.
RaghunandanBNRavichandranERMaratheAG. “Combustion related to solid fuel ramjets”. Journal of Propulsion and Power1985; 1(6): 502–504.
5.
SchulteG. “Fuel regression and flame stabilization studies of solid fuel ramjets”. Journal of Propulsion and Power1986; 2(4): 301–304.
6.
SchulteGPeinRHoglA. “temperature and concentration measurements in a solid fuel ramjet combustion chamber”. Journal of Propulsion and Power1987; 3(2): 114–120.
7.
KortingPAOGSchoyerHFRTimnatYM. “Advanced hybrid rocket motor experiments”. Acta Astronautica1987; 15(2): 97–104.
8.
ZvuloniRGanyALevyY. “Geometric effects on the combustion in solid fuel ramjets”. Journal of Propulsion and Power1989; 5(1): 32–37.
9.
NuscaMJ. “Steady flow combustion model for solid fuel ramjet projectiles”. Journal of Propulsion and Power1990; 6(3): 348–352.
10.
NatanBGanyA. “Ignition and combustion of boron particles in the flowfield of a solid fuel ramjet”. Journal of Propulsion and Power1991; 7(1): 37–43.
11.
Ben-AroshRGanyA. “Similarity and scale effects in solid fuel ramjet combustors”. Journal of Propulsion and Power1992; 8(3): 615–623.
YangJTLeeSCChaoYC. “Analysis of entrainment in a sudden expansion channel with wall mass transfer”. Journal of Propulsion and Power2003; 19(3): 514–516.
14.
LeeT. “Inlet air temperature effects on the performance of the solid fuel ramjet”. Journal of Thermophysics and Heat Transfer2006; 20(4): 937–939.
LiWHuangJZhangZ, et al.“Competition mechanism during oxidation of pyrolysis gases in nonequilibrium boundary layer on thermal protection performance of charring composites”. Polymer Composites2020; 41(7): 2732–2743. DOI: 10.1002/pc.25571.
17.
LiWHuangJZhangZ, et al.“Evaluation method and key factor analysis for thermal protection performance of multifunctional integrated ablative materials”. Polymer Composites2020; 41(12): 5043–5058. DOI: 10.1002/pc.25773.
18.
YangJTWuCYYDinSJ. “Ignition transient of a polymethylmethacrylate slab in a sudden expansion combustor”. Combustion and Flame1994; 98: 300–308.
19.
TahsiniAMFarshchiM. “Numerical study of solid fuel evaporation and auto-ignition in a dump combustor”. ACTA Astronautica2010; 67(7): 774–783.
TahsiniAM. “Piloted ignition of solid fuels in turbulent back-step flows”. Aerospace Science and Technology2012; 18(1): 8–14.
22.
DuesterhausDAHoglA. “Measurements in a solid fuel ramjet combustion with swirl”. In: AIAA 24th Joint Propulsion Conference, Boston, July 1988, pp. 3045–3055.
23.
CampbellWHKoBNLoweSR, et al.“Solid-fuel ramjet fuel regression rate/thrust modulation”. Journal of Propulsion and Power1992; 8(3): 624–629.
24.
PeinRVinnemeierF. “Swirl and fuel composition effects on boron combustion in solid-fuel ramjets”. Journal of Propulsion and Power1992; 8(3): 609–614.
25.
MusaOXiongCChangshengZ. “Combustion characteristics and turbulence modeling of swirling reacting flow in solid fuel ramjet”. ACTA Astronautica2017; 139: 1–17.
26.
MusaOXiongCChangshengZ, et al.“Effect of inlet conditions on swirling turbulent reacting flows in a solid fuel ramjet engine”. Applied Thermal Engineering2017; 113: 186–207.
27.
SpalartPRAllmarasSR. “A one equation turbulence model for aerodynamic flows”. In: 30th Aerospace Sciences Meeting and Exhibit, NV, Jan 1992, AIAA-92-439.
28.
LiouMS. “A sequel to AUSM: AUSM+”. Journal of Computational Physics1996; 129: 364–382.
29.
TahsiniAM. “Ignition delay time in swirling supersonic flow”. ACTA Astronautica2013; 83: 91–96.
30.
TahsiniAM. “Heat release effects on drag reduction in high speed flows”. International Journal of Heat and Mass Transfer2013; 57(2): 657–661.
31.
TahsiniAM. “Transient burning of non-charring materials in boundary layer diffusion flames”. Proceedings of the Institution of Mechanical Engineers, Part G: Journal of Aerospace Engineering2014; 228(4): pp. 586–593.
32.
TahsiniAM. “suppression of the detonation wave with the aid of a multi-component particle cloud”. Journal of Applied Mechanics and Technical Physics2020; 61(1): 54–60.
33.
TahsiniAM. “Combustion efficiency and pressure loss balance for the supersonic combustor”. Proceedings of the Institution of Mechanical Engineers, Part G: Journal of Aerospace Engineering2020; 234(6): 1149–1156.
