Indirect engine sizing via distributed hybrid-electric unmanned aerial vehicle state-of-charge-based parametrisation criteria

Abstract

This paper presents a design process for the challenging problem of sizing the engine pack for a distributed series hybrid-electric propulsion system of unmanned aerial vehicle. Sizing the propulsion system for hybrid-electric unmanned aerial vehicles is a demanding problem because of the two different categories of propulsion (the engine and the motor), and the electrical system characteristics. Furthermore, what adds to the difficulty is that the internal combustion engine does not directly drive the propellers, but it is connected to an electrical generator and therefore provides electrical power to the electric motors and propellers. Hence there is a clear distinction from the traditional engine solutions which are mechanically coupled to the propeller. This paper addresses this specific distinction and proposes an indirect solution based on properties on the electrical part of the system. In particular, a novel parametric characterisation engine sizing approach is presented using the battery pack state-of-charge during a realistic unmanned aerial vehicle flight scenario. Five candidate engine options were considered with different starting conditions for the electrical system. The results show that by using the state-of-charge properties it is possible to select an appropriate size of engine pack while carrying a suitable electrical propulsion pack. However, the solutions are not unique and are appropriate for given design criteria clearly indicated in the paper.

Keywords

Hybrid unmanned aerial vehicle hybrid system design series hybrid distributed hybrid system

Get full access to this article

View all access options for this article.

References

Koster J, Velazco A and Munz C. Hyperion UAV: an international collaboration. In: 50th AIAA aerospace sciences meeting including the new horizons forum and aerospace exposition, aerospace sciences meetings, Nashville, TN, USA, January 2012.

Glassock R, Hung J and Gonzalez L. Multimodal hybrid powerplant for unmanned aerial systems (UAS) robotics. In: Twenty-fourth Bristol international unmanned air vehicle systems conference, Bristol, UK, March 2009.

Ausserer J and Harmon F. Integration validation and testing of a hybrid-electric propulsion system for a small remotely piloted aircraft. In: 10th international energy conversion engineering conference, Atlanta, GA, USA, 2012.

Xie Y, Savvaris A and Tsourdos A. Modelling and control of a hybrid electric propulsion system for unmanned aerial vehicles. In: 2018 IEEE aerospace conference, Big Sky, MT, USA, 2018.

Talbert T. The EcoEagle. Washington DC: National Aeronautics and Space Administration, 2012.

Siemens, Diamond Aircraft and EADS. World's first serial hybrid electric aircraft to fly at Le Bourget, Siemens, Diamond Aircraft and EADS, Munich, 2011.

Friedrich

Robertson

. Hybrid-electric propulsion for aircraft. J Aircraft 2015; 52: 176–189.

National Aeronautics and Space Administration. Overview of subsonic fixed wing project: technical challenges for energy efficient, environmentally compatible subsonic transport aircraft. In: 3rd NASA Glenn propulsion control & diagnostics workshop, Cleveland, OH, USA, 2012.

Welstead J and Felder JL. Conceptual design of a single-aisle turboelectric commercial transport with fuselage boundary layer ingestion. In: 54th AIAA aerospace sciences meeting, AIAA SciTech Forum, California, USA, 2016.

10.

Moore MD. Distributed electric propulsion (DEP) aircraft. Washington DC: National Aeronautics and Space Administration, 2014.

11.

Bradley MK and Droney CK. Subsonic Ultra Green Aircraft Research Phase II: N+4 advanced concept development. Washington DC: National Aeronautics and Space Administration, 2012.

12.

Siemens, Airbus and Rolls-Royce. Airbus, Rolls-Royce, and Siemens team up for electric future, London, 2017.

13.

Yang

Zhou

. A novel optimization sizing model for hybrid solar-wind power generation system. Solar Energy 2007; 81: 76–84.

14.

Seeling-Hochmuth

. A combined optimisation concept for the design and operation strategy of hybrid-PV energy system. Solar Energy 1997; 61: 77–87.

15.

Zou

Sun

. Combined optimal sizing and control for a hybrid tracked vehicle. Energies 2012; 5: 4697–4710.

16.

Deere KA, Viken JK and Viken S. Computational analysis of a wing designed for the X-57 distributed electric propulsion aircraft. In: 35th AIAA applied aerodynamics conference, AIAA Aviation Forum, 2017. Reston, VA: AIAA.

17.

Stoll AM, Bevirt J and Moore MD. Drag reduction through distributed electric propulsion. In: 14th AIAA aviation technology, integration, and operations conference, AIAA Aviation Forum, 2014. Reston, VA: AIAA.

18.

Papathakis KV. NASA Armstrong Flight Research Center Distributed Electric Propulsion Portfolio, Safety and Certification Considerations, 2017.

19.

Brelje BJ and Martins JRRA. Development of a conceptual design model for aircraft electric propulsion with efficient gradients. In: 2018 AIAA/IEEE electric aircraft technologies symposium (EATS), Cincinnati, OH, USA, 2018.

20.

Wheeler

Clare

Trentin

, et al. An overview of the more electrical aircraft. Proc IMechE, Part G: J Aerospace Engineering 2013; 227: 578–585.

21.

Naayagi RT. A review of more electric aircraft technology. In: 2013 international conference on energy efficient technologies for sustainability, Nagercoil, India, 2013.

22.

Hafez AAA and Forsyth A. A review of more-electric aircraft. In: 13th international conference on aerospace sciences and aviation technology, ASAT-13, Cairo, Egypt, 2009.

23.

Dunne A. Aerodynamic analysis and optimization of the Aegis UAV. MSc Thesis, UK, 2012.

24.

Friedrich C and Robertson PA. Design of hybrid-electric propulsion systems for light aircraft. In: 14th AIAA aviation technology, integration, and operations conference, AIAA Aviation Forum, 2004. Reston, VA: AIAA.

25.

Lukic

Emadi

. Effects of drivetrain hybridization on fuel economy and dynamic performance of parallel hybrid electric vehicles. IEEE Trans Veh Technol 2004; 53: 385–389.