This paper presents a mixed-fidelity model to investigate the effect of complex inlet distortion on aero gas turbine engines. The approach is developed by integrating a three-dimensional body force model of multistage compressors and a classical two-dimensional parallel engine model. The internal flow field of a high bypass ratio turbofan engine under different forms of total pressure distortion is simulated by the model. The simulations are discussed in depth to reveal the features of the distorted flow field in the compression components under the whole engine environment. The relationship between the overall performance of the engine and the intensity of inlet total pressure distortion is investigated quantitatively. It is evident that the mixed-fidelity model has the capability to quantitatively evaluate the effect of complex inlet distortion on the performance and the internal flow field of engines with low computational costs.
PearsonHMcKenzieAB. Wakes in axial compressors. J Roy Aeronaut Soc1959; 63: 415–416.
2.
Madani V and Hynes TP. Boundary layer ingesting intakes: design and optimization. In: XIX International Symposium on Air Breathing Engines 2009, Montreal, Canada, 7–11 September 2009, paper no.2009 -1346.
3.
RademakersRPMBindlSNiehuisR. Effects of flow distortions as they occur in S-duct inlets on the performance and stability of a jet engine. J Eng Gas Turbine Power2016; 138: 022605.
4.
Yao J, Gorrell SE and Wadia AR. A time-accurate CFD analysis of inlet distortion induced swirl in multistage fans. In: 43rd AIAA/ASME/SAE/ASEE Joint Propulsion Conference & Exhibit, Cincinnati, OH, 8–11 July 2007, paper no. AIAA 2007 -5059.
5.
FidalgoVJHallCAColinY. A study of fan-distortion interaction within the NASA Rotor 67 transonic stage. J Turbomach2012; 134: 051011.
6.
Soderquist DR, Gorrell SE and List MG. Radial variation in distortion transfer and generation through a highly loaded fan stage. In: ASME Turbo Expo 2018: Turbomachinery Technical Conference and Exposition, Oslo, Norway, 11–15 June 2018, paper no. GT2018-77221.
HaleAO' BrienW. A three-dimensional turbine engine analysis compressor code (TEACC) for steady state inlet distortion. J Turbomach1998; 120: 422–430.
9.
Gong YF, Tan CS, Gordon KA, et al. A computational model for short wavelength stall inception and development in multistage compressors. In: 43rd International Gas Turbine and Aeroengine Congress and Exhibition, Stockholm, Sweden, 2–5 June 1998, paper no. 98-GT-476.
10.
Chima RV. A three-dimensional unsteady CFD model of compressor stability. In: ASME Turbo Expo 2006: Power for Land, Sea, and Air, Barcelona, Spain, 8–11 May 2006, paper no. GT2006-90040.
11.
GuoJHuJ. A three-dimensional computational model for inlet distortion in fan and compressor. Proc IMechE, Part A: J Power and Energy2018; 232: 144–156.
12.
Chima RV, Arend DJ, Castner RS, et al. CFD models of a serpentine inlet, fan, and nozzle. In: 48th AIAA Aerospace Sciences Meeting Including the New Horizons Forum and Aerospace Exposition, Orlando, Florida, 4–7 January 2010, paper no. AIAA 2010-33.
13.
PetersASpakovszkyZSLordWK, et al.Ultrashort nacelles for low fan pressure ratio propulsors. J Turbomach2015; 137: 021001.
14.
HallDKGreitzerEMTanCS. Analysis of fan stage conceptual design attributes for boundary layer ingestion. J Turbomach2017; 139: 071012.
15.
MaYCuiJVadlamaniNR, et al.A mixed-fidelity numerical study for fan–distortion interaction. J Turbomach2018; 140: 091003.
16.
Follen G and Aubuchon M. Numerical zooming between a NPSS engine system simulation and a one-dimensional high compressor analysis code. Report no. NASA/ TM-2009-209913, 2009, NASA.
17.
Turner M, Reed J, Ryder R, et al. Multi-fidelity simulation of a turbofan engine with results zoomed into mini-maps for a zero-D cycle simulation. In: ASME Turbo Expo 2004: Power for Land, Sea, and Air, Vienna, Austria, 14–17 June 2004, paper no. GT2004-53956.
18.
Pachidis V, Pilidis P, Guindeuil G, et al. A partially integrated approach to component zooming using computational fluid dynamics. In: ASME Turbo Expo 2005: Power for Land, Sea, and Air, Reno, Nevada, USA, 6–9 June 2005, paper no. GT2005-68457.
19.
Pachidis V, Pilidis P, Talhouarn F, et al. A fully integrated approach to component zooming using computational fluid dynamics. In: ASME Turbo Expo 2005: Power for Land, Sea and Air, Nevada, USA, 6–9 June 2005, paper no. GT2005-68458.
20.
PachidisVPilidisPTemplalexisI, et al.Prediction of engine performance under compressor inlet flow distortion using streamline curvature. J Eng Gas Turbine Power2007; 129: 97–103.
21.
Yan W. Research and application of mathematic model for aerodynamic stability analysis on aviation engine. Doctor Dissertation, Nanjing University of Aeronautics and Astronautics, China, 2016.
22.
Johnsen IA and Bullock RO. Aerodynamic design of axial-flow compressors. Report no. NASA SP-36, 1965, NASA.
23.
Creveling HF and Carmody RH. Axial-flow compressor computer program for calculating off-design performance. Report no. NASA CR 72472, 1968, NASA.
24.
Reid L and Moore RD. Performance of a single stage axial-flow transonic compressor with rotor and stator aspect ratios of 1.19 and 1.26, respectively, and with design pressure ratio of 1.82. Report no.NASA TP-1338, 1978, NASA.
25.
Spakovszky ZS. Active control of rotating stall in NASA compressor stage 35 with inlet distortion. Doctor Dissertation, Massachusetts Institute of Technology, Cambridge, USA, 1998.
26.
Longley J P and Greitzer E M. Inlet distortion effects in aircraft propulsion system integration. In: Steady and transient performance prediction of gas turbine engines, Vol. 183 of AGARD Lecture Series, London: Specialised Printing Services Limited 40 Chigwell Lane. 1992, Chapter 6.
27.
Soeder RH and Bobula GA. Effect of steady-state pressure distortion on inlet flow to a high-bypass-ratio turbofan engine. Report no. NASA-TM-82964, 1982, NASA.
28.
Lee K, Lee B, Kang S, et al. Inlet distortion test with gas turbine engine in the altitude engine test facility. In: 27th AIAA Aerodynamic Measurement Technology and Ground Testing Conference, Chicago, Illinois, 28 June–1 July 2010, paper no. AIAA 2010-4337.
