The present paper describes a system-level thermo-fluid network analysis for the secondary air system analysis of a typically film-cooled nozzle guide vane with multiple actions of jet impingement. The one-dimensional simulation was done with the help of the commercially available Flownex 2015 software. The system-level thermo-fluid network results were validated with both the computational fluid dynamics results and experimentally available literature. The entire nozzle guide vane geometry was first mapped to a thermo-fluid network model and the pressure conditions at different nodes. The discharge and heat transfer coefficients obtained from the Ansys FLUENT were specified as inputs to the thermo-fluid network model. The results show that the one-dimensional simulation of the coolant mass flow rates and jet Nusselt number values are in good agreement with the three-dimensional computational fluid dynamics results.
HayNHenshallSEManningA. Discharge coefficients of holes angled to the flow direction. ASME J Turbomach1994; 116: 92–96.
2.
KutzKJSpeerTM. Simulation of the secondary air system of aero engines. ASME J Turbomach1994; 116: 306–315.
3.
EbenhochESpeerTM. Simulation of cooling systems in gas turbines. ASME J Turbomach1996; 118: 301–306.
4.
StuttafordPJRubiniPA. Preliminary gas turbine combustor design using a network approach. ASME J Eng Gas Turbines Power1997; 119: 546–552.
5.
MartinTJDulikravichGS. Analysis and multidisciplinary optimization of internal coolant networks in turbine blades. AIAA J Propul Power2002; 18: 896–906.
6.
Rama KumarBVNPrasadBVSSS. A combined CFD and network approach for a simulated turbine blade cooling system. Indian J Eng Mater Sci2006; 13: 195–201.
7.
PretoriusJJMalanAGVisserJA. A flow network formulation for compressible and incompressible flow. Int J Numer Meth Heat Fluid Flow2008; 18: 185–201.
8.
GreyvensteinGP. The application of system CFD to the design and optimization of high-temperature gas-cooled nuclear power plants. J Eng Gas Turbines Power2008; 130: 032901–032901.
9.
Bonini A, Andreini A, Carcasci C, et al. Conjugate heat transfer calculations on GT rotor blade for industrial applications. Part I: equivalent internal fluid network setup and procedure description. In: ASME turbo expo 2012: turbine technical conference and exposition, Copenhagen, Denmark, 11–15 June 2012, ASME Paper No. GT2012-69846.
10.
BrkicD. An improvement of Hardy Cross method applied on looped spatial natural gas distribution networks. Appl Energy2009; 86: 1290–1300.
11.
AndreiLAndreiniAFacchiniB, et al.A decoupled CHT Procedure: application and validation on a gas turbine vane with different cooling configurations. Energy Procedia2014; 45: 1087–1096.
12.
YanPCuriYShiL, et al.Application of conjugate heat transfer and fluid network analysis to improvement design of turbine blade with integrated cooling structures. Proc IMechE, Part G: J Aerospace Engineering2014; 228: 2286–2299.
13.
TranLVKapatJS. Coupled zero-dimensional/one-dimensional model for hybrid heat transfer measurements. AIAA J Thermophys Heat Transfer2014; 28: 236–250.
14.
Jin H, Riddle A and Cooke LA Compressible flow network analysis for deign upgrade of industrial aero derivative HP turbine blades. In: Proceedings of ASME turbo expo, Berlin, Germany, 9–13 June 2008, Paper ID: GT2008-50431.
15.
Aidin P and Mehrabian MA. Predicting the coolant flow and heat transfer in radial turbine. In: International symposium on heat transfer in gas turbine systems, ICHMT2009, Antalya, Turkey, 9–14 August 2009, Paper No. 17.
16.
MajumdarAKRavindranSS. Fast, nonlinear network flow solvers for fluid and thermal transient analysis. Int J Numer Meth Heat Fluid Flow2010; 20: 617–637.
17.
MajumdarAKRavindranSS. Numerical prediction of conjugate heat transfer in fluid network. AIAA J Propul Power2011; 27: 620–630.
18.
Abba L, Abram R, Barigozzi G, et al. Design validation and verification of film cooling on gas turbine rotor endwall. In: Proceedings of ASME turbo expo, Düsseldorf, Germany, 16–20 June 2014, ASME Paper No. GT2014-25621.
19.
Chowdhury NHK, Zirakzadeh H and Han JC. A Predictive model for preliminary gas turbine blade cooling analysis. In: Proceedings of ASME turbo expo, Montréal, Canada, 15–19 June 2015, Paper ID: GT2015-42205.
20.
ChandranDPrasadB. Conjugate heat transfer study of combined impingement and showerhead film cooling near NGV leading edge. Int J Rotating Mach2015; 2015: 1–13.
21.
Mazzei L, Andreini A, Facchini B, et al. A 3D coupled approach for the thermal design of aero-engine combustor liners. In: Proceedings of ASME turbo expo, Seoul, South Korea, 13–17 June 2016, GT2016-56605.
22.
KukutlaPRPrasadBVSSS. Secondary flow visualization on stagnation row of a combined impingement and film cooled high-pressure gas turbine nozzle guide vane using PIV technique. J Visualization2017; 20: 817–832.
23.
KukutlaPRPrasadBVSSS. Numerical study on the secondary air performance of the film holes for the combined impingement and film cooled first stage of high-pressure gas turbine nozzle guide vane. Int J Turbo Jet Engines. Epub ahead of print 26 July 2017. DOI: https://doi.org/10.1515/tjj-2017-0022.
