Dynamics of global instabilities in the vaneless diffuser: A numerical approach and its applications

Abstract

The effect of inviscid main flow and backflow boundary layer at diffuser walls both contribute to the instability of vaneless diffuser. This study is carried out to investigate the instability induced by the inviscid main flow. The biglobal instability analysis adopted here is focused on the large time scale growth of perturbations imposed on a base flow. The diffuser considered has two parallel walls, and the undisturbed flow is assumed to be circumferentially uniform, isentropic, and to have no axial velocity. In order to access the given state is stable or not, a linearized Euler’s equations for compressible base flow is used with a small-amplitude perturbation assumption. The eigenvalue problem is established through the spectral collocation discretization. Compared with experimental data, the stability model proposed in this paper is verified. Based on this numerical approach, the influence of inflow condition and geometric parameters, especially the compressibility effect on the stability of diffuser are investigated. And based on the results from some experiment measurement, the reliability of the stability analysis is verified through comparison. It is showed that diffuser instability increases rapidly and the stall rotation speed decreases quickly with the increase of diffuser radius ratio. The largest critical inflow angle can be obtained when the wave number m is around 3–5 for the radius ratio between 1.5 and 2.2. The present biglobal stability method has the capability to predict the onset of rotating stall, especially for wide diffusers.

Keywords

Instability vaneless diffuser eigenvalue problem spectral method

Get full access to this article

View all access options for this article.

References

Day

. Stall, surge, and 75 years of research. J Turbomach 2016; 138: 011001–011001.

Ubben

Niehuis

. Experimental investigation of the diffuser vane clearance effect in a centrifugal compressor stage with adjustable diffuser geometry – Part I: compressor performance analysis. J Turbomach 2015; 137: 031003–031003.

Everitt

Spakovszky

. An investigation of stall inception in centrifugal compressor vaned diffuser. J Turbomach 2013; 135: 011025–011025.

Spakovszky

Roduner

. Spike and modal stall inception in an advanced turbocharger centrifugal compressor. J Turbomach 2009; 131: 031012–031012.

Jansen

. Rotating stall in a radial vaneless diffuser. ASME J Basic Eng 1964; 86: 750–758.

Jansen

. Steady fluid flow in a radial vaneless diffuser. J Basic Eng 1964; 86: 607–617.

Senoo

Kinoshita

. Influence of inlet flow condition and geometries of a centrifugal vaneless diffuser on critical flow angle for reverse flow. J Fluids Eng 1977; 99: 98–103.

Senoo Y and Kinoshita Y. Limits of rotating stall and stall in vaneless diffuser of centrifugal compressors. ASME Paper 78-GT-19, 1978: V01AT01A019–V01AT01A019.

Senoo

Kinoshita

. Influence of inlet flow conditions and geometries of centrifugal vaneless diffusers on critical flow angle for reverse flow. ASME J Fluids Eng 1977; 99: 98–103.

10.

Frigne

Braembussche

RVD

. A theoretical model for rotating stall in the vaneless diffuser of a centrifugal compressor. J Eng Gas Turbine Power 1985; 107: 507–513.

11.

Tsujimoto

Yoshida

Mori

. Study of vaneless diffuser rotating stall based on two-dimensional inviscid flow analysis. J Fluids Eng 1996; 118: 123–127.

12.

Moore

. Weak rotating flow disturbances in a centrifugal compressor with a vaneless diffuser. J Turbomach 1989; 111: 442–449.

13.

Chen

Shen

Zhu

et al.

A 3D compressible flow model for weak rotating waves in vaneless diffusers – Part I: the model and Mach number effects. J Turbomach 2011; 134: 041010–041010.

14.

Abdelhamid

. Effects of vaneless diffuser geometry on flow instability in centrifugal compression systems. Can Aeronaut Space J 1983; 29: 259–266.

15.

Kinoshita Y and Matsumura T. Direct numerical simulation of rotating stall and stall induced in centrifugal vaneless diffusers. In: ASME Turbo Expo 2000: power for land, sea, and air, 2000, pp.V001T03A026–V001T03A026.

16.

Zhu X C, Jia K and Du Z H. Prediction of centrifugal compressor performance from choke through stall with a physical throttle. In: ASME Turbo Expo 2015: turbine technical conference and exposition. American Society of Mechanical Engineers, 2015, pp.V02CT44A014-V02CT44A014.

17.

Semlitsch

Mihăescu

. Flow phenomena leading to surge in a centrifugal compressor. Energy 2016; 103: 572–587.

18.

Liu

Zhu

et al.

A numerical approach to predict the rotating stall in the vaneless diffuser of a centrifugal compressor using the eigenvalue method. J Theor Appl Mech 2016; 55: 635–647.

19.

Canuto

Hussaini

Quarteroni

et al.

Spectral methods: evolution to complex geometries and applications to fluid dynamics, Springer-Verlag New York, Inc, 2007.

20.

Moler

Stewart

. An algorithm for generalized matrix eigenvalue problems. SIAM J Numer Anal 1973; 10: 241–256.

21.

Meerbergen

Roose

. The restarted Arnoldi method applied to iterative linear system solvers for the computation of rightmost eigenvalues. SIAM J Matrix Anal Appl 1997; 18: 1–20.

22.

Peters

Wilkinson

. Inverse iteration, ill-conditioned equations and Newton’s method. SIAM Rev 1979; 21: 339–360.

23.

Sleijpen

Der

. A generalized Jacobi–Davidson iteration method for linear eigenvalue problems. SIAM Rev 1994; 17: 267–293.

24.

Frigne

Van

. Distinction between different types of impeller and diffuser rotating stall in a centrifugal compressor with vaneless diffuser. ASME J Eng Gas Turbine Power 1984; 106: 468–474.

25.

Abidogun

. Effects of vaneless diffuser geometries on rotating stall. J Propul Power 2002; 22: 542–549.