An analytical and experimental study of a hybrid rocket motor

Abstract

The hybrid rocket motor is a kind of chemical propulsion system that has been recently given serious attention by various industries and research centers. The relative simplicity, safety and low cost of this motor, in comparison with other chemical propulsion motors, are the most important reasons for such interest. Moreover, throttle-ability and thrust variability on demand are additional advantages of this type of motor. In this paper, the result of an internal ballistic simulation of hybrid rocket motor in a zero-dimensional form is presented. Further to validate the code, an experimental setup was designed and manufactured. The simulation results are compared with the experimental data and good agreement is achieved. The effect of various parameters on the motor performance and on the combustion products is also investigated. It is found that increasing the oxidizer flow rate, increases the pressure and specific impulse of the motor; however, the slope of the specific impulse for the high flow rate case reduces. In addition, by increasing the combustion chamber pressure, the specific impulse is increased considerably. The initial diameter of the fuel port does not have significant effect on the pressure chamber and on the specific impulse. Addition of a percentage of an oxidizer like ammonium perchlorate to the fuel increases the specific impulse linearly.

Keywords

Hybrid rocket motor internal ballistic simulation fuel regression rate motor efficiency experimental setup

Get full access to this article

View all access options for this article.

References

Sutton

Biblarz

. Rocket propulsion elements, 7th ed. New York: John Wiley & Sons, 2001.

Cavalleri RJ and Loehr RD. Hybrid rocket propulsion performance prediction. 41st AIAA/ASME/SAE/ASEE Joint Propulsion Conference & Exhibit, July 2005, Tucson, Arizona, AIAA Paper 2005–3548.

Zilliac G and Karabeyoglu MA. Hybrid rocket fuel regression rate data and modeling. In: 42nd AIAA/ASME/SAE/ASEE joint propulsion conference & exhibit, Sacramento, CA, 9–12 July 2006, AIAA Paper 2006–4504.

Mangeot A and Gascoin N. 2-D Transient numerical code for hybrid rocket simulations with detailed chemistry. In: 20th AIAA computational fluid dynamics conference, Honolulu, Hawaii, 27–30 June 2011, AIAA Paper 2011–3212.

Novozhilov

Joseph

Ishiko

. Polymer combustion as a basis for hybrid propulsion: A comprehensive review and new numerical approaches. Energies 2011; 4: 1779–1839.

Chen Y-S, Lian YY, Yang L, et al. Combustion modeling and analysis of hybrid rocket motor internal ballistics. In: 48th AIAA/ASME/SAE/ASEE joint propulsion conference and exhibit, Atlanta, Georgia, 30 July to 1 August 2012, AIAA 2012–3749.

Connell TL and Santi SA. Experiment and semi-empirical modeling of lab-scale hybrid rocket performance. In: 45th joint propulsion conference, Denver, Colorado, 2–5 August 2009, AIAA Paper 2009–5086.

Peretz

Einav

Hashmonay

. Development of a laboratory-scale system for hybrid rocket motor testing. J Propul Power 2011; 27(1): 190–196.

Aoki A and Fukuchi A. Development of low cost fuels for hybrid rocket engine. In: 46th AIAA/ASME/SAE/ASEE joint propulsion conference & exhibit, 25–28 July 2010, Nashville, TN, AIAA Paper 2010–6638.

10.

Mungas

Das

Kulkrani

. Design, construction and testing of a low-cost hybrid rocket motor. Aircraft Eng Aerosp Technol 2003; 75(3): 262–271.

11.

Shannon

Stephen

. Correlation of hybrid rocket propellant regression measurements with enthalpy-balance model predictions. J Spacecraft Rockets 2008; 45(5): 1010–1020.

12.

Bonnie JM and Sanford G. Computer program for calculation of complex chemical equilibrium compositions and applications. NASA Reference Publications, 1994.

13.

Doran E, Dyer J, Lohner K, et al. Nitrous Oxide Hybrid Rocket Motor Fuel Regression Rate Characterization. In: 43rd AIAA joint propulsion conference, July 2007, Cincinnati, OH, AIAA Paper 2007–5352.

14.

Muzzy RJ. Applied hybrid combustion theory. In: Proceedings of the 8th AIAAISAE joint propulsion specialist conference, New Orleans, LA, November–December 1972, AIAA Paper 72–1143.

15.

Paul PJ, Mukunda HS and Jain VK. Regression rate in boundary layer combustion. In: 19th symposium on combustion, Combustion Institute, Pittsburgh, PA, 1982.

16.

Strand LD, Ray RL and Cohen NS. Hybrid rocket combustion study. In: 31st AIAA/ASME/SAE/ASEE joint propulsion conference and exhibit, Monterey, CA, 28–30 June 1993, AIAA Paper 93–2412.

17.

Fredrick RA, Moser MD, Knox LR, et al. Ballistic properties of mixed hybrid propellants. In: 40th AIAA/ASME/SAE/ASEE joint propulsion conference & exhibit, Fort Lauderdale, FL, AIAA Paper 2004–3824.

18.

Beckwith

Maraugoni

Lienhard

VJH

. Mechanical measurements, 5th ed. Cambridge, MA: Addison-Wesley Publishing Company, 1993, pp. 45–115.