The procedure for wing aerodynamic design based on the algorithm of simultaneous multiregime optimization of cruise and low-speed performance is considered. The method is based on the combination of fast direct methods for subsonic and transonic wing analysis, geometry variation module and the optimization procedure. The description of all the components and examples of practical application of the developed technique for design of the conventional medium-haul airplane wing and the ‘Flying Wing’ configuration are presented.
AGARD. Computational methods for aerodynamic design (inverse) and optimization. AGARD CP-463, 1990.
3.
БолсуновскийАЛБузоверяНПКарасьОВ. Развитие методов аэродинамического проектирования крейсерской компоновки дозвуковых самолетов. Трy∂ы ЦАГИ2002; 2655–2655.
4.
Wilhelm R. An inverse design method for engine nacelles and wings. In: 24th congress of international council of the aeronautical sciences, Yokohama, Japan, ICAS, 29 August–3 September 2004, 3.8.9.
DrelaM. Design and optimization method for multi-element airfoils. AIAA Paper1993; 93-0969.
7.
Wild J. Multi objective constrained optimization and high-lift applications. VKI Lecture Series 2004-07, 2004.
8.
van DamCP. The aerodynamic design of multi-element high-lift systems for transport airplanes. Progr Aerosp Sci2002; 38: 101–144.
9.
RumseyCLYingSX. Prediction of high lift: review of present CFD capability. Progr Aerosp Sci2002; 38: 145–180.
10.
Bolsunovsky AL, Buzoverya NP and Nikolaeva KS. Development of high-lift airfoils with desired aerodynamic characteristics by means of numerical optimization. In: 43rd Israel annual conference on aerospace sciences, Tel Aviv-Haifa, 2003.
11.
Kim S, Alonso JJ and Jameson A. Design optimization of high-lift configurations using a viscous continuous adjoint method. AIAA Paper 2002-0844, 2002.
12.
Nemec M and Zingg DW. Optimization of high-lift configurations using a Newton-Krylov algorithm. AIAA Paper 2003-3957, 2003.
13.
ReckzehD. Aerodynamic design of the high-lift-wing for a megaliner aircraft. Aerosp Sci Technol2003; 7: 107–119.
14.
JuppJ. Wing aerodynamics and the science of compromise. Aeronaut J2001; 105(1053): 633–641.
15.
Rudnik R. CFD assessment for high-lift flows in the European project EUROLIFT. AIAA Paper 2003-3794, 2003.
16.
NieldBN. An overview of the Boeing 777 high lift aerodynamic design. Aeronaut J1995; 99(989): 361–371.
17.
БолсуновскийАЛ. Расчет аэродинамических характеристик крыльев большого удлинения на больших углах атаки при малых скоростях. Мо∂елирование в механике1988; 2: 6–6.
18.
HendersonML. A solution to the 2-D separated wake modeling problem and its use to predict of arbitrary airfoil sections. AIAA Paper1978; 78–156.
JacobK. Computation of the flow around wings with rear separation. J Aircraft1984; 21: 97–98.
21.
Nagati MG and Rashidian B. Prediction of planform modification effects at high angles of attack. AIAA Paper 88-4353, 1988.
22.
Besnard E, Kural O and Cebeci T. Flow predictions about three-dimensional high lift systems. AIAA Paper 99-0543, 1999.
23.
Chen LT, Suciu EO and Morino L. A finite element method for potential aerodynamics around complex configurations. AIAA Paper 74-107, 1974.
24.
Maskew B. Prediction of subsonic aerodynamics – a case for low-order panel methods. AIAA Paper 81-0252, 1981.
25.
Bolsunovsky AL, Buzoverya NP and Chernyshev IL. Accelerated genetic optimization algorithm for aerodynamic design problems. In: 3rd international conference on advanced engineering design, Prague, 2003.
26.
Bolsunovsky AL, Buzoverya NP, Gubanova MA, et al. Multiobjective optimization procedure for the wing aerodynamic design of the medium-haul airplane. In: International conference on “Challenges in aeronautics” ASTEC’07, Moscow, 2007.
27.
Liebeck RH. Design of the blended-wing-body subsonic transport. VKI Lecture Series 2005-06, 2005.
28.
Bolsunovsky AL, Buzoverya NP, Gurevich BI, et al. Flying wings: problems and decisions. VKI Lecture Series 2005-06, 2005.
