Critical speed enhancement of a Korean high-speed train through optimization with measured wheel profiles

Abstract

This study describes the critical speed enhancement of the KTX-Sancheon, a Korean high-speed train, using measured wheel profiles. The wheel wear shape of the commercial high-speed train was measured according to mileage, and the relationship between conicity and mileage was investigated. The critical speed of the KTX-Sancheon power car was analyzed numerically with the measured wheel profiles. The suspension parameters were optimized to increase the critical speed of the KTX-Sancheon. As a result, the critical speed of the power car increased by 34.1% compared to its initial condition. The results are being used for a new design of the power bogie.

Keywords

Critical speed high-speed train KTX-Sancheon optimization suspension

Get full access to this article

View all access options for this article.

References

Shabana

Zaazaa

Sugiyama

. Railroad vehicle dynamics, Boca Raton, FL: CRC Press, 2008, pp. 24–31. .

Wickens

. Fundamentals of rail vehicle dynamics: guidance and stability, Lisse, the Netherlands; Exton, PA: Swets & Zeitlinger Publishers, 2003, pp. 6–10.

Hur

You

. A study on the wear characteristics of wheel profile for high speed rolling-stock. J Kor Soc Railway 2005; 8: 477–482.

Hur

Park

You

et al.

An analysis on the influence of wheel flange wear on the vibration of EMU. J Kor Soc Railway 2009; 12: 230–235.

Kim JC and Lee CW. A study on lateral vibration at the tail of train for KTX. In: Proceedings of the Korean Society for Precision Engineering Autumn conference, Gwangju, Republic of Korea, 20–21 October 2005, pp.17–22.

Lee CW, Kim JC and Moon KH. The analysis on the carbody vibration of wheel profiles for KTX. In: Proceedings of the Korean Society for Railway Spring conference, Busan, Republic of Korea, 28–30 May 2003, pp.730–733.

VAMPIRE Pro V6.20 users' manual. DeltaRail Group Limited, 2013.

Kalker

. Review of wheel/rail rolling contact theories, the general problem of rolling contact. Appl Mech Div 1980; 40: 77–92.

Sun JF and Li WX. Roller Rig test report for G7 power bogie used for Korean high-speed train. Beijing, China: China Academy Railway Sciences (CARS), 2002.

10.

Plackett

Burman

. The design of optimum multifactorial experiments. Biometrika 1946; 33: 305–325.

11.

Park

. Design of experiments, Seoul, Republic of Korea: Minyoung Publishing Co., 2009.

12.

Myers

Montgomery

Anderson-Cook

. Response surface methodology: process and product optimization using designed experiments, Hoboken, NJ: John Wiley & Sons, Inc., 2009.

13.

Rao

. Engineering optimization: theory and practice, Hoboken, NJ: John Wiley & Sons, Inc., 2009.