The goal of this paper is to present both the development of an intelligent sensor that can be used to obtain information about the existence of rolling contact fatigue cracks created by wheel–rail interactions and also the data obtained in a real-world study performed for its validation. The design of a bogie-mounted instrumentation system to detect and measure wheel rolling in railway units is introduced, and experimental results are presented. The system is designed to analyse and compare the angular velocity of the wheels of a railway unit. It uses photodiodes to acquire information about rolling conditions and a radio frequency link to send that information to a data logger, which acquires and saves the data for post-processing and analysis.
SmithRA. The wheel-rail interface – some recent accidents. Fatigue Fract Engng Mater Struct2003; 26(10): 901–907.
2.
TelliskiviT. Wheel-rail interaction analysis. PhD Thesis, Department of Machine Design, Royal Institute of Technology, KTH, Stockholm, Sweden2003.
3.
ISO 2631-4:2001. Mechanical vibration and shock devaluation of human exposure to whole-body vibration. Part 4: guidelines for the evaluation of the effects of vibration and rotational motion on passenger and crew comfort in fixed guideway transport systems.
4.
DememillyDBrunelJCharkalulE. Methodology for the analysis of rolling contact fatigue of railway wheels and comparison of different steel grades. In: International wheelset congress. Cape Town, South Africa, March 2010.
5.
ClayronPHillDN. Rolling contact fatigue of a rail steel. Wear1987; 117: 319–334.
6.
RingsbergJ. Life prediction of rolling contact fatigue crack initiation. Int J Fatigue2001; 23: 575–586.
7.
GrassleSI. Rail corrugation: characteristics, causes, and treatments. Proc IMechE, Part F: J Rail Rapid Transit2009; 223: 581–596. DOI: 10.1243/09544097JRRT264.
8.
ClarkR. Rail flaw detection: overview and needs for future developments. NDT&E Int2004; 37(2): 111–118.
9.
DeutschlEGasserCNielAWerschonigJ. Defect detection on rail surfaces by a vision based system. In IEEE Intelligent Vehicles Symposium. Parma, Italy, 14–17 June 2004 (IEEE Press, Piscataway, New Jersey), pp. 507–511.
10.
HillmansenSSmithRA. The management of fatigue crack growth in railway axles. Proc IMechE, Part F: J Rail Rapid Transit2004; 218: 327–336. DOI: 10.1243/0954409043125879.
11.
LewisRDwyer-JoyceRS. Wear at the wheel/rail interface when sanding is used to increase adhesion. Proc IMechE, Part F: J Rail Rapid Transit2006; 220: 29–41. DOI: 10.1243/095440905X33260.
12.
MelTXYuJHWilsonDA. A mechatronic approach for effective wheel slip control in railway traction. Proc IMechE, Part F: J Rail Rapid Transit2009; 223: 295–304. DOI: 10.1243/09544097JRRT249.
13.
LewisRGallardo-HernandezEAHiltonTArmitageT. Effect of oil and water mixtures on adhesion in the wheel/rail contact. Proc IMechE, Part F: J Rail Rapid Transit2009; 223: 275–283. DOI: 10.1243/09544097JRRT248.
14.
BaopingCGuoquingLRonghuaH. Intelligent speed and mileage measurement system for vehicles based on Hall sensor. In First international workshop on education technology and computer science, Wuhan, Hubei, China, 7–8 March2009, vol. 2; 272–274. DOI: 10.1109/ETCS.2009.321.
15.
OlarescuNVMusuroiSSorandaruCAtanasiuG. Enhanced current-sensorless drive system for PMSMS using two Hall-effect sensors for wide speed range. In 11th international conference on optimization of electrical and electronic equipment, Brasov, Romania, 22–24 May2008; 87–92.
16.
VogelgesangBBauerCRettigRBoschR. Performance of GMR-elements in sensors for automotive application. In: ValldorfJGessnerW (eds) Advanced microsystems for automotive applications2005; 435–446 (Springer).
17.
FreitasPPSilvaFBMeloLV. Giant magnetoresistive sensors for rotational speed control and current monitoring applications. In IEEE international conference on electronic, circuits and systems, Instituto Superior Tecnico, Lisboa, Portugal, 7–10 September 1998, vol. 3 (IEEE Press, Piscataway, New Jersey), pp. 267–269, pp. 267–269.
Ahlbeck DR and Daniels LE. A review of rail corrugation processes under different operating modes. In Technical Papers Presented at the 1990 ASME/IEEE Joint Railroad Conference, Chicago, Illinois, 17–19 April 1990, pp. 13–17.
20.
LongX-YWeiQ-CZhengF-Y. Dynamic analysis of railway transition curves. Proc IMechE, Part F: J Rail Rapid Transit2009; 224: 1–14. DOI: 10.1243/09544097JRRT287.
