The overall cost associated with a product manufactured using electric discharge machine (EDM) incorporates tooling cost as one of the significant components. In the present study, process optimization was attempted for EDM parameters to minimize the electrode wear and cavity size variation and maximize the material removal rate. The machining was carried out using composite tool fabricated using a two-step methodology that involves an indirect 3D printing technique, rapid tooling, and pressureless microwave sintering. Composite samples having rectangular cross-section (35 mm× 25 mm × 10 mm) were fabricated. The central composite design technique was utilized to plan and conduct experiments. EDM process parameters—discharge current, pulse-on time, and duty factor—were considered to investigate their effect on electrode and material removal rate and cavity dimension deviation. Multi-objective optimization was performed using genetic algorithm, and an optimized set of machining parameters 6 A discharge current, 180 µs pulse-on time, and 75% duty factor was obtained. Machining of D2 steel was performed at these parameters, and an electrode wear rate of 1.81 mg/min, material removal rate of 97.35 mg/min, and dimensional deviation of 1.42% were obtained. To assess the process capability, a complex-shaped tool was fabricated and considered for machining. A dimensional comparison demonstrated an effective method for manufacturing intricately shaped composite electrodes, achieving both a low electrode wear rate and a high material removal rate.
SinghRSinghRPTrehanR. Electrical discharge machining of Fe-based shape memory alloy: parametric evaluation with microstructure analysis. Proc IMechE, Part E: J Process Mechanical Engineering2022; 237(6): 2475–2487. DOI: https://doi.org/10.1177/09544089221140636
2.
LakshmananSRajendranRShanmugakaniSK, et al.Analyzing the geometrical errors of silicon nitride-titanium nitride on performing electric discharge machining using response surface methodology. Proc IMechE, Part E: J Process Mechanical Engineering2023; 238(6): 1–24.
3.
SelvarajanLNarayananCSJeyapaulR. Optimization of EDM parameters on machining si 3N4-TiN composite for improving circularity, cylindricity, and perpendicularity. Mater Manuf Process2016; 31: 405–412.
4.
HoKHNewmanST. State of the art electrical discharge machining (EDM). Int J Mach Tools Manuf2003; 43: 1287–1300.
5.
KechagiasJIakovakisVKatsanosM, et al.Edm electrode manufacture using rapid tooling: a review. J Mater Sci2008; 43: 2522–2535.
6.
PriyankaPJayakumarVGiridharanPK. Investigation of machining performance of waspaloy using copper–graphite composite electrodes in electric discharge machining. Mater Res Express2024; 11(9).
SomaniNTyagiYKKumarP.Review on alternative approaches to fabricate the copper based electric discharge machining (EDM) electrodes. IOP Conf Ser Mater Sci Eng2021; 1116: 012105.
9.
LiLWongYSFuhJYH, et al.EDM performance of TiC/copper-based sintered electrodes. Mater Des2001; 22: 669–678.
10.
AyyappadasCShanuOSVijayanA, et al.Effect of graphene, SiC and graphite addition on hardness, microstructure and electrical conductivity of microwave sintered copper MMCs fabricated by powder metallurgy route. J Phys Conf Ser; 2019; 1355. Epub ahead of print 2019. DOI: https://doi.org/10.1088/1742-6596/1355/1/012035.
11.
SinghGPandeyPM. Rapid manufacturing of copper–graphene composites using a novel rapid tooling technique. Rapid Prototyp J2020; 26: 765–776.
12.
ChenFYingJWangY, et al.Effects of graphene content on the microstructure and properties of copper matrix composites. Carbon N Y2016; 96: 836–842.
13.
AyyappadasCMuthuchamyARaja AnnamalaiA, et al.An investigation on the effect of sintering mode on various properties of copper–graphene metal matrix composite. Adv Powder Technol2017; 28: 1760–1768.
14.
YuJWangLGuanY, et al.A high strength and high electrical conductivity graphene/Cu composite with good high-temperature stability. Mater Charact2023; 201: 112928.
15.
HopkinsonNHagueRJMDickensPM.Rapid manufacturing: an industrial revolution for the digital age. 2006. Epub ahead of print 2006. DOI: https://doi.org/10.1002/0470033991.
16.
PhillipsTJDoverJS. Reply. J Am Acad Dermatol1992; 27: 490–491.
17.
RosochowskiAMatuszakA. Rapid tooling: the state of the art. J Mater Process Technol2000; 106: 191–198.
18.
SinghSRamakrishnaSSinghR. Material issues in additive manufacturing: a review. J Manuf Process2017; 25: 185–200.
19.
El-WardanyTISheYJagdaleVN, et al.Challenges in three-dimensional printing of high-conductivity copper. J Electron Packag Trans ASME2018; 140(2): 1–12. DOI: https://doi.org/10.1115/1.4039974/368005
20.
YanagidaDNakamotoTMinamiH, et al.Electrical discharge machining using copper electrode made by additive manufacturing. Procedia CIRP2020; 95: 449–453.
21.
PogsonSRFoxPSutcliffeCJ, et al.The production of copper parts using DMLR. Rapid Prototyp J2003; 9: 334–343.
22.
TangYFuhJYHLuL, et al.Formation of electrical discharge machining electrode via laser cladding. Rapid Prototyp J2002; 8: 315–319.
23.
DürrHPilzREleserNS. Rapid tooling of EDM electrodes by means of selective laser sintering. Comput Ind1999; 39: 35–45.
24.
CzelusniakTAmorimFLHigaCF, et al.Development and application of new composite materials as EDM electrodes manufactured via selective laser sintering. Int J Adv Manuf Technol2014; 72: 1503–1512.
25.
YangQZhangPLuQ, et al.Application and development of blue and green laser in industrial manufacturing: a review. Opt Laser Technol2024; 170. Epub ahead of print 2024. DOI: https://doi.org/10.1016/j.optlastec.2023.110202.
26.
AsanoKTsukamotoMSechiY, et al.Laser metal deposition of pure copper on stainless steel with blue and IR diode lasers. Opt Laser Technol2018; 107: 291–296.
27.
SinghNSinghRAhujaIPS. On development of functionally graded material through fused deposition modelling assisted investment casting from Al2O3/SiC reinforced waste low density polyethylene. Trans Indian Inst Met2018; 71: 2479–2485.
28.
PrakashCSinghSPruncuCI, et al.Surface modification of Ti-6Al-4 V alloy by electrical discharge coating process using partially sintered Ti-Nb electrode. Materials (Basel)2019: 12: 1006-1–1006-16. DOI: https://doi.org/10.3390/ma12071006
29.
DimlaDEHopkinsonNRotheH. Investigation of complex rapid EDM electrodes for rapid tooling applications. Int J Adv Manuf Technol2004; 23: 249–255.
30.
RennieAEWBockingCEBennettGR. Electroforming of rapid prototyping mandrels for electro-discharge machining electrodes. J Mater Process Technol2001; 110: 186–196.
31.
GillotFMognolPFuretB. Dimensional accuracy studies of copper shells used for electro-discharge machining electrodes made with rapid prototyping and the electroforming process. J Mater Process Technol2005; 159: 33–39.
32.
FerreiraJCMateusASAlvesNF. Rapid tooling aided by reverse engineering to manufacture EDM electrodes. Int J Adv Manuf Technol2007; 34: 1133–1143. DOI: https://doi.org/10.1007/s00170-006-0690-4
33.
BaiYWilliamsCB. An exploration of binder jetting of copper. Rapid Prototyp J2015; 21: 177–185.
34.
YanXWangCXiongW, et al.Thermal debinding mass transfer mechanism and dynamics of copper green parts fabricated by an innovative 3D printing method. RSC Adv2018; 8: 10355–10360.
35.
RenLZhouXSongZ, et al.Process parameter optimization of extrusion-based 3D metal printing utilizing PW-LDPE-SA binder system. Materials (Basel)2017; 10. Epub ahead of print 2017. DOI: https://doi.org/10.3390/ma10030305.
36.
SinghJSinghGPandeyPM. Electric discharge machining using rapid manufactured complex shape copper electrode: parametric analysis and process optimization for material removal rate, electrode wear rate and cavity dimensions. Proc IMechE, Part C: J Mechanical Engineering Science2020; 234: 2459–2473.
37.
SinghGPandeyPM. Rapid manufacturing of copper components using 3D printing and ultrasonic assisted pressureless sintering: experimental investigations and process optimization. J Manuf Process2019; 43: 253–269.
38.
XuLSrinivasakannanCPengJ, et al.Study on characteristics of microwave melting of copper powder. J Alloys Compd2017; 701: 236–243.
39.
DasPPathakDKSharmaP, et al.A review on the mechanical and biocorrosion behaviour of iron and zinc-based biodegradable materials fabricated using powder metallurgy routes. Corros Rev.2024; 43(2). DOI: https://doi.org/10.1515/CORRREV-2023-0169/ASSET/GRAPHIC/J_CORRREV-2023-0169_CV_004.JPG
40.
SalehiMSeetHLGuptaM, et al.Rapid densification of additive manufactured magnesium alloys via microwave sintering. Addit Manuf2021; 37: 101655.
41.
AnklekarRMBauerKAgrawalD, et al.Improved mechanical properties and microstructural development of microwave sintered copper and nickel steel PM parts. Powder Metall2005; 48: 39–46.
42.
SaitouK. Microwave sintering of iron, cobalt, nickel, copper and stainless steel powders. Scr Mater2006; 54: 875–879.
43.
PeroglioMMeunierCFavreJ, et al.A parametric study of conventional and high-speed microwave sintering of robocast porcelain. Open Ceram2022; 9: 100246.
44.
GunnewiekRFKKiminamiRHGA. Effect of heating rate on microwave sintering of nanocrystalline zinc oxide. Ceram Int2014; 40: 10667–10675.
45.
KumarAPandeyPM. Study of the influence of microwave sintering parameters on the mechanical behaviour of magnesium-based metal matrix composite. Proc IMechE, Part C: J Mechanical Engineering Science2020; 235(13): 2416–2425. DOI: https://doi.org/10.1177/0954406220951236
46.
TsaiHCYanBHHuangFY. Edm performance of Cr/Cu-based composite electrodes. Int J Mach Tools Manuf2003; 43: 245–252.
47.
AyyappadasCMuthuchamyAKumarNN, et al.An investigation on tribological and electrical behaviour of conventional and microwave processed copper–graphite composites. Mater Res Express2019; 6: 6573-1–6573-16. DOI: https://doi.org/10.1088/2053-1591/ab1027
48.
MandalPMondalSC. Development and application of Cu-SWCNT nanocomposite–coated 6061Al electrode for EDM. Int J Adv Manuf Technol2019; 103: 3067–3076.
49.
DimlaDEHopkinsonNRotheH. Investigation of complex rapid EDM electrodes for rapid tooling applications. Int J Adv Manuf Technol2004; 23: 249–255.
50.
SinghJSinghGPandeyPM. Electric discharge machining using rapid manufactured complex shape copper electrode with cryogenic cooling channel. Proc IMechE, Part B: J Engineering Manufacture2021; 235: 173–185.
51.
KislyPS.Theoretical aspects of high pressure sintering BT - Science of Sintering: new directions for materials processing and microstructural control, https://doi.org/10.1007/978-1-4899-0933-6_24 (1989).
52.
LiWLiDFuQ, et al.Conductive enhancement of copper/graphene composites based on high-quality graphene. RSC Adv2015; 5: 80428–80433.
53.
SharifiMKarimzadehEEnayatiFHM. Fabrication and evaluation of mechanical and tribological properties of boron carbide reinforced aluminum matrix nanocomposites. Mater Des2011; 32: 3263–3271.
54.
AryaSPandeyPM. Rapid manufacturing of copper–graphene composite EDM electrode for improved machining performance. Mater Manuf Process2024; 39: 2266–2278.
55.
AryaSPandeyPM. Statistical modelling and process optimization of EDM electrode fabricated using pressureless microwave sintering and rapid tooling route. Proc IMechE, Part E: J Process Mechanical Engineering2024: 1–12. DOI: https://doi.org/10.1177/09544089231222682
56.
MondalAAgrawalDUpadhyayaA. Microwave heating of pure copper powder with varying particle size and porosity. J Microw Power Electromagn Energy2009; 43: 4315–43110.
KumarAPandeyPM. Development of Mg based biomaterial with improved mechanical and degradation properties using powder metallurgy. J Magnes Alloy2020; 8: 883–898.
59.
SharmaVPandeyPM. Experimental investigations and statistical modeling of surface roughness during ultrasonic-assisted turning with self-lubricating cutting inserts. Proc IMechE, Part E: J Process Mechanical Engineering2018; 232: 709–722.
60.
TripathiGPandeyPM. Experimental investigations into pressureless microwave sintering of iron – hydroxyapatite composite for biodegradable implants. Proceeding of institution of mechanical engineers, Part C: Journal of Mechanical Engineering Science2023; 237(24): 5933–5950. DOI: https://doi.org/10.1177/09544062231166488
PerumalAAzhagurajanABaskaranS, et al.Statistical evaluation and performance analysis of electrical discharge machining (EDM) characteristics of hard Ti-6Al-2Sn-4Zr-2Mo alloy. Mater Res Express2019; 6: 6552-1–6552-17. DOI: https://doi.org/10.1088/2053-1591/ab06da
63.
PatelKMPandeyPMVenkateswara RaoP. Study on machinabilty of Al2 O3 ceramic composite in EDM using response surface methodology. J Eng Mater Technol Trans ASME2011; 133: 1004-1–1004-10. DOI: https://doi.org/10.1115/1.4003100
64.
ChenYMahdavianSM. Parametric study into erosion wear in a computer numerical controlled electro-discharge machining process. Wear1999; 236: 350–354.
65.
SrivastavaVPandeyPM. Statistical modeling and material removal mechanism of electrical discharge machining process with cryogenically cooled electrode. Procedia Mater Sci2014; 5: 2004–2013.
66.
HabibSS. Study of the parameters in electrical discharge machining through response surface methodology approach. Appl Math Model2009; 33: 4397–4407.
67.
JabbaripourBSadeghiMHFaridvandS, et al.Investigating the effects of EDM parameters on surface integrity, MRR and TWR in machining of Ti-6Al-4 V. Mach Sci Technol2012; 16: 419–444.
Supplementary Material
Please find the following supplemental material available below.
For Open Access articles published under a Creative Commons License, all supplemental material carries the same license as the article it is associated with.
For non-Open Access articles published, all supplemental material carries a non-exclusive license, and permission requests for re-use of supplemental material or any part of supplemental material shall be sent directly to the copyright owner as specified in the copyright notice associated with the article.
