Abstract
Friction Stir Incremental Forming (FSIF) is an innovative solid-state metal-forming technique that uses frictional heat and mechanical deformation to create complex shapes without dyes. It has found applications in industries like aerospace, automotive, and consumer goods. In this study, FSIF was applied to AA8079 alloy sheets to form cone and pyramid geometries. A detailed investigation of process parameters such as spindle speed, table feed, step size, and coatings was conducted to assess their effects on surface roughness and forming forces. Optimal parameters were identified using the Taguchi L27 orthogonal array and the TOPSIS method, which determined the best settings as a wall angle of 20°, a step size of 1 mm, a spindle speed of 1500 rpm, and a table feed of 2400 mm/min. Scanning electron microscopy was employed to study surface roughness, texture, and defects, revealing the influence of these parameters on surface quality. Additionally, Finite Element Method (FEM) analysis, performed using ABAQUS software, was used to predict formability and stress distribution during the forming process. Key results showed successful formation of cone and triangular pyramid shapes on AA8079 sheets, with FEM accurately predicting stress levels. This comprehensive study provides valuable insights into optimizing FSIF for improved material performance and structural integrity. The findings emphasize the importance of fine-tuning FSIF parameters to enhance surface finish and reduce defects, offering potential improvements for various industrial applications.
Get full access to this article
View all access options for this article.