Sage Journals: Discover world-class research

Abstract

With the development of industrial manufacturing, flexible manufacturing system provides an effective way to improve the machining quality and efficiency, as well as reduce the manufacturing cost. Fflexible manufacturing system reliability has been one focus of recent studies. But a systematic, effective and executable reliability evaluation method has not yet proposed in existing researches. This work firstly presented a three-layer index system for flexible manufacturing system reliability evaluation, which is composed of the whole layer indexes, subsystem layer indexes and equipment layer indexes determined by system composition and running features analysis. Time-varying weights of each layer are calculated through the modelling of the reliability and reliability importance based on the classical two-state failure hypothesis. Then, considering multi-state failure modes of elements, a fuzzy evaluation model of flexible manufacturing system reliability is established based on fault grading and statistics, considering grade and number distributions of faults within a certain statistical period. Moreover, through a simulation case of a box-parts finishing flexible manufacturing system, the influence of failure rates and service time on the index weights distribution is firstly revealed, which can provide theoretical basis for the improvement of flexible manufacturing system reliability; then the effectiveness of the proposed method is verified through the comparison of results obtained by the previous model based on two-state failure and the proposed model based on multi-state failure.

Keywords

Evaluation index system flexible manufacturing system reliability time-varying weights multi-state failure fuzzy evaluation

Get full access to this article

View all access options for this article.

References

Zhu

Yuan

Wang

Hou

Scheduling a Single-Arm Two-Cluster Tool With a Process Module Failure Subject to Wafer Residency Time Constraints. IEEE Transactions on Automation Science and Engineering, early access at https://10.1109/TASE.2023.3275703, 2023.

Zverkina

Farkhadov

. On an estimate of the rate of convergence for regenerative processes in queuing theory and related problems. Preprint at https://10.48550/arXiv.2111.09310, 2021.

Wang

Tian

. The FMS optimal scheduling based on Petri net model. Syst Eng Theory Pract 2014; 34: 2716–2721.

Zhang

Wang

Hong

Reliability modeling and analysis of reactor protect system based on Petri net. J Phys Confe Ser 2021; 1754: 012059.

Wang

Gao

. Process modeling and performance analysis of flexible manufacture system using GSPN approach. J Syst Simul 2008; 20: 5258–5261.

Huang

Shi

Qian

. Reliability analysis of solar array drive assembly by dynamic fault tree[J]. Safety Reliab Model Appl: Adv Reliab Sci 2021; 31–42.

Mrm

. Dynamic reliability analysis framework using fault tree and dynamic Bayesian network: a case study of NPP. Nucl Eng Technol 2022; 54: 1213–1220.

Buzacott

Yao

. Flexible manufacturing systems: a review of analytical models. Manage Sci, INFORMS 1986; 32: 890–905.

Mayr

. An algorithm for the general Petri net reachability problem. Proceedings of the 13th Annual ACM Symposium on Theory of Computing 1981; None(None): 238–246.

10.

Wang

Xiao

Cao

. Exploring energy conservation of two-machine-one-buffer manufacturing system. Mech Sci Technol Aerosp Eng 2019; 38: 551–557.

11.

Miriyala

Viswanadham

. Reliability analysis of flexible manufacturing systems. Int J Flex Manuf Syst 1989; 2: 145–162.

12.

Cui

. Reliability Analysis and Assessment of Engine Head Product Line Equipment, thesis, Dalian University of Technology, 2013.

13.

Sethia

. Enhancing reliability of a continuous manufacturing system using wip buffers. Int J Simul Model 2008; 7: 61–70.

14.

Dui

Bai

. System reliability and the importance analysis in multi-state protection systems. Oper Res Manage Sci 2020; 29: 98–104.

15.

Yao

Zhang

Wang

Chen

Importance analysis method of fuzzy fault tree based on T-S model. Chinese Mech Eng 2011; 22: 1261–1268.

16.

Zhao

Hong

Sun

Shan

Yin

Zhang

Chen

. System reliability evaluation method and system based on sub-component reliability function. CN202110402020.1[P], 2021.

17.

Yang

Cai

Dui

. A new and efficient computation method of IM (integrated importance measures) for components in binary coherent systems. J Northwest Polytechnical Univ 2011; 29: 939–947.

18.

Luo

Chen

Zhang

. Evaluation method of aviation equipment’s structure contribution rate to system-of-systems based on fault tree analysis. J Nat Univ Def Technol 2021; 43: 155–162.

19.

Kumar

Swati

. The α, β-cut intervals and weakest t-norm based importance measure for criticality analysis in intuitionisitic fuzzy fault tree analysis of LNG-ESD system. Int J Uncertain Fuzz Knowl-Based Syst 2021; 29: 119–143.

20.

Lai

Liu

. Reliability estimation and prediction of multi-state components and coherent systems. Reliab Eng Syst Safety 2005; 88: 93–98.

21.

Zhang

Peng

. Reliability of intelligent management of research infrastructure based on internet of things. Control Decis 2019; 34: 1116–1120.

22.

Zarezadeh

Asadi

. Network reliability modeling under stochastic process of component failures. IEEE Trans Reliab 2013; 62: 917–929.

23.

Zhou

Zhu

Wang

. Reliability-based design optimization strategy for structures by universal generating functions. China Mech Eng 2021; 32: 1442–1448.

24.

Zhou

Zhai

. System performance reliability assessment based on performance degradation and Monte-Carlo simulation. Chinese J Sci Inst 2014; 35: 1185–1191.

25.

Jing

. Multi-state system reliability: a new and systematic review. Procedia Eng 2012; 29: 531–536.

26.

Zeng WB, Shen GX, Frenkel IB, Khvatsckin L, Bolvashenkov I, Kammermann J and Herzog HG, et al. On non-homogeneous Markov reward model to availability and importance analysis for CNC machine tools. Int J Math, Eng Manage Sci 2020; 6: 30–43.

27.

Xiahou

. Importance Measurements and Reliability Assessment of Multi-State Systems Under Epistemic Uncertainty. Master thesis, University of Electronic Science and Technology of China., 2018.

28.

Xiahou

Liu

Zhang

, et al. Birnbaum importance measure of multi-state systems under epistemic uncertainty. J Mech Eng 2018; 54: 223–232.

29.

Qiu

Huang

. Dynamic reliability metric and importance analysis of multi-state systems. J South China Univ Technol (Natural Science Edition) 2017; 45: 52–58.

30.

Phuc

Emanuele

. Conditional reliability-based importance measures. Reliab Eng Syst Safety 2020; 193: 106633.

Supplementary Material

Please find the following supplemental material available below.

For Open Access articles published under a Creative Commons License, all supplemental material carries the same license as the article it is associated with.

For non-Open Access articles published, all supplemental material carries a non-exclusive license, and permission requests for re-use of supplemental material or any part of supplemental material shall be sent directly to the copyright owner as specified in the copyright notice associated with the article.

0.00 MB

0.21 MB

Reliability evaluation of flexible manufacturing systems based on three-layer index system with time-varying weights

Abstract

Keywords

Get full access to this article

References

Supplementary Material