An experimental investigation of the effects of blending camphor oil infused with jack fruit biodiesel and nanoparticles on the performance,combustion,and exhaust emissions of a compression ignition engine

Abstract

Growing urbanisation, higher standards of living, and population growth are all factors that will drive up global energy demand. The direct injection of jack fruit biodiesel in compression ignition engine to result in indigent performance and to overcome the addition of nanoparticles of zinc oxide, cerium oxide, and aluminium oxide to biodiesel-camphor blends is the focus of this research. The fuels’ soluble were tested at a temperature range of 30 °C, 50 °C, and 100 °C. One was picked to simulate a diesel engine's performance, combustion, and emissions. Equal parts of zinc oxide, cerium oxide, and aluminium oxide (100 ppm each) were included into the mixture. The inclusion of nanoparticles in the fuel increases its calorific value. Nanoparticles as catalysts enhanced brake-specific fuel consumption by 3.6%, 13.5%, and 17.5% for zinc oxide (ZnO), cerium oxide, (CeO₂) and aluminium oxide (Al₂O₃) compared to diesel at full load. ZnO, CeO₂, and Al₂O₃ nanofuels improved brake thermal efficiency by 15.3%, 10.8%, and 4% at higher loads than BD10C10 at full load. Max heat release increased 10.64%, 9.36%, and 8.8% for ZnO, CeO₂, and Al₂O₃ nanofuels. Carbon monoxide, hydrocarbons, nitrogen oxides, and smoke emissions were reduced when nano-fluid was added in diesel. Directions for using Nano-assisted renewable fuel sources to reduce fossil fuel use as a novel approach in the present study.