This paper presents a report on the corrosion resistance behaviour of organic corrosion inhibitors like titan yellow (1) and hydroxyl naphthol blue (2) on API 5L X56 steel in 3.5% NaCl as a corrosive medium. Electrochemical impedance spectroscopy (EIS) and potentiodynamic polarisation methods were used in the investigation. The protective film-forming tendency of inhibitor 1 and 2 on steel surfaces was confirmed from scanning electron microscopy, energy dispersive X-ray spectroscopy and atomic force microscopy. The quantity of metallic iron dissolved in the corroding medium was validated through inductively coupled plasma–optical emission spectrometry. The adsorption behaviour of inhibitors 1 and 2 on steel surfaces in a corrosive environment follows the Langmuir isotherm. The electrochemical impedance spectroscopy and potentiodynamic polarisation results indicate that both 1 and 2 act as inhibitors in 3.5 wt.% NaCl solution. Further, an increase in the water contact angle as well as a decrease in iron content in the solution by inductively coupled plasma–optical emission spectrometry explains the corrosion resistance behaviour of the steel towards the protection of underground pipelines, and industrial equipment.
FirouzdorVSridharanKCaoG, et al.Corrosion of a stainless steel and nickel-based alloys in high temperature supercritical carbon dioxide environment. Corros Sci2013; 69: 281–291.
2.
SastriVS. Challenges in Corrosion Costs, Causes, Consequences, and Control. Wiely, 2015.
3.
AwasthiASaxenaKKArunV. Sustainable and smart metal forming manufacturing process. Mater Today Proc2021; 44: 2069–2079.
4.
AgarwalKMTyagiRKSaxenaKK. Deformation analysis of Al Alloy AA2024 through equal channel angular pressing for aircraft structures. Adv Mater Process Technol2022; 8: 828–842.
5.
ZhangZZhangJXieJ, et al.Developing a Mg alloy with ultrahigh room temperature ductility via grain boundary segregation and activation of non-basal slips. Int J Plast2023; 162: 103548.
6.
WangZHuLZhaoM, et al.Bamboo charcoal fused with polyurethane foam for efficiently removing organic solvents from wastewater: experimental and simulation. Biochar2022; 4: 1–16.
7.
PeabodyAW. Peabody’s control of pipeline corrosion: second edition. Peabody’s Control pipeline Corros Second Ed.
8.
Kumar SharmaSKumar SaxenaK. An outlook on the influence on mechanical properties of AZ31 reinforced with graphene nanoparticles using powder metallurgy technique for biomedical application. Mater Today Proc2022; 56: 2278–2287.
9.
SaxenaKKYadavSDSonkarS, et al.Effect of temperature and strain rate on deformation behavior of zirconium alloy: zr-2.5Nb. Procedia Mater Sci2014; 6: 278–283.
10.
HanCXZhiJQZengZ, et al.Synthesis and characterization of nano-polycrystal diamonds on refractory high entropy alloys by chemical vapour deposition. Appl Surf Sci2023; 623: 157108.
11.
LiuZFanBZhaoJ, et al.Benzothiazole derivatives-based supramolecular assemblies as efficient corrosion inhibitors for copper in artificial seawater: formation, interfacial release and protective mechanisms. Corros Sci2023; 212: 110957.
12.
WangZChenCLiuH, et al.Enhanced denitrification performance of Alcaligenes sp. TB by Pd stimulating to produce membrane adaptation mechanism coupled with nanoscale zero-valent iron. Sci Total Environ2020; 708: 135063.
13.
JhaPShaikshavaliGShankarMG, et al.A hybrid ensemble learning model for evaluating the surface roughness of AZ91 alloy during the end milling operation. Surf Rev Lett2022.
14.
LiuYFanBXuB, et al.Ambient-stable polyethyleneimine functionalized Ti3C2Tx nanohybrid corrosion inhibitor for copper in alkaline electrolyte. Mater Lett2023; 337: 133979.
15.
WangZDaiLYaoJ, et al.Enhanced adsorption and reduction performance of nitrate by Fe–Pd–Fe3O4 embedded multi-walled carbon nanotubes. Chemosphere2021; 281: 130718.
16.
LiYBaiQGuanY, et al.In situ plasma cleaning of large-aperture optical components in ICF. Nucl Fusion2022; 62: 076023.
17.
GuoKGouGLvH, et al.Jointing of CFRP/5083 aluminum alloy by induction brazing: processing, connecting mechanism, and fatigue performance. Coatings2022; 12: 1559.
18.
KumarPSSAllamrajuKV. A review of natural fiber composites [jute, sisal, kenaf]. Mater Today Proc2019; 18: 2556–2562.
19.
ChigondoMChigondoF. Recent natural corrosion inhibitors for mild steel: an overview. J Chem2016.
20.
DongPZhangYZhuS, et al.First-principles study on the adsorption characteristics of corrosive species on passive film TiO2 in a NaCl solution containing H2S and CO2. Met2022; 12: 1160.
21.
FuZHYangBJShanML, et al.Hydrogen embrittlement behavior of SUS301L-MT stainless steel laser-arc hybrid welded joint localized zones. Corros Sci2020; 164: 108337.
22.
ZhuQChenJGouG, et al.Ameliorated longitudinal critically refracted—attenuation velocity method for welding residual stress measurement. J Mater Process Technol2017; 246: 267–275.
23.
ShenZZhouYGuoY, et al.Tuning the concentration of surface/bulk oxygen vacancies in CeO2 nanorods to promote highly efficient photodegradation of organic dyes. Chinese Chem Lett2021; 32: 2524–2528.
24.
LuoJXieZZouJ, et al.Efficient dye-sensitized solar cells based on concerted companion dyes: systematic optimization of thiophene units in the organic dye components. Chinese Chem Lett2022; 33: 4313–4316.
25.
AryaSBBhattacharjeeARoyM. Electrochemical corrosion behavior of Ti-10V-2Fe-3Al in different corrosive media. Mater Corros2018; 69: 1025–1038.
26.
BudarapuPRSudhir SastryYBNatarajanR. Design concepts of an aircraft wing: Composite and morphing airfoil with auxetic structures. Front Struct Civ Eng2016; 10: 394–408.
27.
BhardwajARVaidyaAMMeshramPD, et al.Machining behavior investigation of aluminium metal matrix composite reinforced with TiC particulates. Int J Interact Des Manuf2023.
28.
GuptaTKBudarapuPRChappidiSR, et al.Advances in carbon based nanomaterials for bio-medical applications. Curr Med Chem2018; 26: 6851–6877.
29.
FinšgarM. Advanced surface analysis using GCIB-C60++-tandem-ToF-SIMS and GCIB-XPS of 2-mercaptobenzimidazole corrosion inhibitor on brass. Microchem J2020; 159: 105495.
30.
yadavPBeniwalGSaxenaKK. A review on pore and porosity in tissue engineering. Mater Today Proc2021; 44: 2623–2628.
31.
BudarapuPRYbSSJavvajiB, et al.Vibration analysis of multi-walled carbon nanotubes embedded in elastic medium. Front Struct Civ Eng2014; 8: 151–159.
32.
JafferyHASabriMFMSaidSM, et al.Electrochemical corrosion behavior of Sn-0.7Cu solder alloy with the addition of bismuth and iron. J Alloys Compd2019; 810: 151925.
33.
BalguriPKSamuelDGHThumuU. A review on mechanical properties of epoxy nanocomposites. Mater Today Proc2021; 44: 346–355.
34.
SudhirsastryYBKrishnaYBudarapuPR. Parametric studies on buckling of thin walled channel beams. Comput Mater Sci2015; 96: 416–424.
35.
MadkourLHKayaSGuoL, et al.Quantum chemical calculations, molecular dynamic (MD) simulations and experimental studies of using some azo dyes as corrosion inhibitors for iron. Part 2: Bis–azo dye derivatives. J Mol Struct2018; 1163: 397–417.
36.
BandhuDKumariSPrajapatiV, et al.Experimental investigation and optimization of RMDTM welding parameters for ASTM A387 grade 11 steel. Mater Manuf Process2021; 36: 1524–1534.
37.
KorpiAGŢǎluŞBramowiczM, et al.Minkowski functional characterization and fractal analysis of surfaces of titanium nitride films. Mater Res Express2019; 6: 086463.
38.
KrishnajaDCheepuMVenkateswarluD. A review of research progress on dissimilar laser weld-brazing of automotive applications. IOP Conf Ser Mater Sci Eng2018; 330: 012073.
39.
AnushreeCPhilipJ. Efficient removal of methylene blue dye using cellulose capped Fe3O4 nanofluids prepared using oxidation-precipitation method. Colloids Surfaces A Physicochem Eng Asp2019; 567: 193–204.
40.
MuvvalaPBandhuD. The influence of flow blockage elements at the orifice exit on the hydrodynamic and thermal performances of impinging square jets - an experimental investigation. Heat Mass Transfer2023.
41.
PareekSJainDHussainS, et al.A new insight into corrosion inhibition mechanism of copper in aerated 3.5 wt.% NaCl solution by eco-friendly Imidazopyrimidine Dye: experimental and theoretical approach. Chem Eng J2019; 358: 725–742.
42.
El BoraeiNFHalimSAIbrahimMAM. Effective corrosion inhibition of mild steel in acidic medium using inexpensive kermes natural dye: experimental and quantum chemical study. Anti-Corrosion Methods Mater2018; 65: 626–636.
43.
PemeTOlasunkanmiLOBahadurI, et al.Adsorption and corrosion inhibition studies of some selected dyes as corrosion inhibitors for mild steel in acidic Medium: gravimetric, electrochemical, quantum chemical studies and synergistic effect with iodide ions. Mol2015; 20: 16004–16029.
44.
BandhuDThakurAPurohitR, et al.Characterization & evaluation of Al7075 MMCs reinforced with ceramic particulates and influence of age hardening on their tensile behavior. J Mech Sci Technol2018; 32: 3123–3128.
45.
Al-MoubarakiAH. Corrosion protection of mild steel in acid solutions using red cabbage dye. Chem Eng Commun2015; 202: 1069–1080.
46.
PalanisamyKKannanPSekarA. Evaluation of chromotrope FB dye as corrosion inhibitor using electrochemical and theoretical studies for acid cleaning process of petroleum pipeline. Surf Interf2018; 12: 50–60.
47.
BedairMAEl-SabbahMMBFoudaAS, et al.Synthesis, electrochemical and quantum chemical studies of some prepared surfactants based on azodye and Schiff base as corrosion inhibitors for steel in acid medium. Corros Sci2017; 128: 54–72.
48.
VermaCQuraishiMAEbensoEE. Quinoline and its derivatives as corrosion inhibitors: A review. Surf Interf2020; 21: 100634.
49.
TanJKEBirbilisNChoudharyS, et al.Corrosion protection enhancement of Mg alloy WE43 by in-situ synthesis of MgFe LDH/citric acid composite coating intercalated with 8HQ. Corros Sci2022; 205: 110444.
50.
KayaFSolmazRHalil Geçibeslerİ. The use of methanol extract of Rheum Ribes (işgın) flower as a natural and promising corrosion inhibitor for mild steel protection in 1 M HCl solution. J Ind Eng Chem2023; 122: 102–117.
51.
de OliveiraMCLCorreaOVda SilvaRMP, et al.Structural, adhesion and electrochemical characterization of electroless plated Ni-P-carbon black composite films on API 5L X80 steel. J Mater Eng Perform2019; 28: 4751–4761.
52.
KairySKZhouSTurnbullA, et al.Corrosion of pipeline steel in dense phase CO2 containing impurities: A critical review of test methodologies. Corros Sci2023; 214: 110986.
53.
YousifQAFadelZAbuelelaAM, et al.Insight into the corrosion mitigation performance of three novel benzimidazole derivatives of amino acids for carbon steel (X56) in 1 M HCl solution. RSC Adv2023; 13: 13094–13119.
54.
DeyabMA. Adsorption and inhibition effect of Ascorbyl palmitate on corrosion of carbon steel in ethanol blended gasoline containing water as a contaminant. Corros Sci2014; 80: 359–365.
55.
MartinezSSternI. Thermodynamic characterization of metal dissolution and inhibitor adsorption processes in the low carbon steel/mimosa tannin/sulfuric acid system. Appl Surf Sci2002; 199: 83–89.
56.
El-ShamyAMEl-HadekMANassefAE, et al.Optimization of the Influencing Variables on the Corrosion Property of Steel Alloy 4130 in 3.5 wt.% NaCl Solution. J Chem2020.
57.
UsmanBJGasemZMUmorenSA, et al.Eco-friendly 2-Thiobarbituric acid as a corrosion inhibitor for API 5L X60 steel in simulated sweet oilfield environment: Electrochemical and surface analysis studies. Sci Reports2019; 9: 1–17.
58.
YadavMSinhaRRKumarS, et al.Corrosion inhibition effect of spiropyrimidinethiones on mild steel in 15% HCl solution: Insight from electrochemical and quantum studies. RSC Adv2015; 5: 70832–70848.
59.
KolasinskiKW. Surface Science Foundations of Catalysis and Nanoscience. Wiley Interscience, New York, 2002.
60.
ZhuYFreeMLChoJH. Integrated evaluation of mixed surfactant distribution in water-oil-steel pipe environments and associated corrosion inhibition efficiency. Corros Sci2016; 110: 213–227.
61.
LeeSMLeeWGKimYH, et al.Surface roughness and the corrosion resistance of 21Cr ferritic stainless steel. Corros Sci2012; 63: 404–409.
62.
AminMAIbrahimMM. Corrosion and corrosion control of mild steel in concentrated H2SO4 solutions by a newly synthesized glycine derivative. Corros Sci2011; 53: 873–885.
63.
FajardoSLlorenteIJiménezJA, et al.Effect of Mn additions on the corrosion behaviour of TWIP Fe-Mn-Al-Si austenitic steel in chloride solution. Corros Sci2019; 154: 246–253.
64.
FekryAMEl-SherifRM. Electrochemical corrosion behavior of magnesium and titanium alloys in simulated body fluid. Electrochim Acta2009; 54: 7280–7285.
65.
AlizadehMBordbarS. The influence of microstructure on the protective properties of the corrosion product layer generated on the welded API X70 steel in chloride solution. Corros Sci2013; 70: 170–179.
66.
XiangTLiuJLiuQ, et al.Self-healing solid slippery surface with porous structure and enhanced corrosion resistance. Chem Eng J2021; 417: 128083.
Supplementary Material
Please find the following supplemental material available below.
For Open Access articles published under a Creative Commons License, all supplemental material carries the same license as the article it is associated with.
For non-Open Access articles published, all supplemental material carries a non-exclusive license, and permission requests for re-use of supplemental material or any part of supplemental material shall be sent directly to the copyright owner as specified in the copyright notice associated with the article.
