Abstract
A model study of unsteady stagnation-point flow of most important nanoparticles, that is, carbon nanotubes suspended nanofluid towards shrinking/expanding sheet with convective boundary condition is demonstrated. Two types of carbon nanotubes, namely, single-wall and multi-wall nanotubes are carefully considered. Numerical solutions of converted equations from governing equation of the problem are obtained and those are graphically presented. Similar to without carbon nanotubes case, dual and unique solutions in specific ranges of velocity ratio parameter are achieved. Analysis disclosures that the condition on range where dual solutions exist is unaltered with solid-volume fraction and type of carbon nanotubes. The surface drag-force and heat transfer rate from wall are larger for single-walled carbon nanotubes nanofluid than multi-walled carbon nanotubes nanofluid. An increment in the parameter related to convective boundary condition generates high rate of heat transfer. After stability analysis, it is identified that in case of dual solutions, upper branch is stable and lower branch is unstable, while unique solution is always stable.
Keywords
Get full access to this article
View all access options for this article.
References
Supplementary Material
Please find the following supplemental material available below.
For Open Access articles published under a Creative Commons License, all supplemental material carries the same license as the article it is associated with.
For non-Open Access articles published, all supplemental material carries a non-exclusive license, and permission requests for re-use of supplemental material or any part of supplemental material shall be sent directly to the copyright owner as specified in the copyright notice associated with the article.
