Modeling and optimization of A-GTAW process using Box–Behnken design and hybrid BPNN-PSO approach

Abstract

Gas tungsten arc welding (GTAW) is the most extensively used process capable of fabricating a wide range of alloys based on its distinctive merits has been introduced. However, some demerits have been reported among which shallow penetration is the most crucial ones. In order to deal with the poor penetration of the process, different procedures have been proposed among which activated gas tungsten arc welding (A-GTAW) is the most extensively used one. In this study effect of percentage of activating fluxes (TiO₂ and SiO₂) combination (F) and the most important process variables (welding current (C), welding speed (S)) on the most important process measures (weld bead width (WBW), depth of penetration (DOP), and consequently aspect ratio (ASR)) in welding of AISI316L austenite stainless steel parts have been investigated. Box-behnken design (BBD) has been used to design the experimental matrix required for date gathering, modeling, and statistical analysis purposes. A neural network with a back propagation algorithm (BPNN) in artificial neural network (ANN) modeling approach has been employed to relate the process input variables and output characteristics. The proper BPNN architecture (number of hidden layers and neurons/nodes in each hidden layer) has been determined using particle swarm optimization (PSO) algorithm. Moreover, process optimization in such a way that maximum DOP, minimum WBW, and desired ASR achieved has been carried out using PSO algorithm. Next, the performance of PSO algorithm has been checked using simulated annealing (SA) algorithm. Finally, to evaluate the performance of the proposed method a set of confirmation experimental test has been conducted. Results of experimental tests revealed that the proposed method is quite efficient in modeling and optimization (with less than 4% error) of A-GTAW process.

Keywords

activated gas tungsten arc welding (A-GTAW)Box-behnken design (BBD)artificial neural network (ANN)simulated annealing (SA) algorithm particle swarm optimization (PSO) algorithm

Get full access to this article

View all access options for this article.

References

Sivakumar

Vasudevan

Korra

. Effect of activated flux tungsten inert gas (A-TIG) welding on the mechanical properties and the metallurgical and corrosion assessment of inconel 625. Weld World 2021; 65: 1061–1077.

Neelima

Agilan

Saravanan

, et al. Optimisation of flux and weld parameters during flux bounded tungsten inert Gas welding (FBTIG) of nickel based superalloy inconel 600. Trans Indian Nat Acad Eng 2021; 6: 123–131.

Sivakumar

Korra

. Optimization of welding process parameters for activated tungsten inert welding of inconel 625 using the technique for order preference by similarity to ideal solution methodology. Arab J Sci Eng 2021; 46: 7409–7418.

Dhananjay

Bhagwan

Shrikant

, et al. Effect of different activated fluxes on mechanical properties of DSS 2205 in pulsed tungsten inert Gas welding. Adv Additive Manuf Joining 2021; 54: 619–629.

Vidyarthy

Dwivedi

. Microstructural and mechanical properties assessment of the P91 A-TIG weld joints. J Manuf Process 2018; 31: 523–535.

Lippold

Kotecki

. Welding metallurgy and weldability of stainless steels. WILEY, 2005.

Pamnani

Vasudevan

Vasantharaja

, et al. Optimization of A-GTAW welding parameters for naval steel (DMR 249 A) by design of experiments approach. J Mater Design Appl 2015; 34: 1–12.

Arivazhagan

Vasudevan

. Studies on A-TIG welding of 2.25 Cr–1Mo (P22) steel. Mater Manuf Processes 2015; 18: 55–59.

Arivazhagan

Vasudevan

. A comparative study on the effect of GTAW processes on the microstructure and mechanical properties of P91 steel weld joints. Mater Manuf Processes 2014; 16: 305–311.

10.

Kurtulmus

. Effects of welding parameters on penetration depth in mild steel A-TIG welding. Scientia Iranica B 2019; 26: 1400–1404.

11.

Kumar

Lucas

Howse

, et al. Investigation of the A-TIG Mechanism and the Productivity Benefits in TIG Welding. Fifteenth International Conference on the Joining of Materials, 15 December 2009.

12.

Venkatesan

George

Sowmyasri

, et al. Effect of ternary fluxes on depth of penetration in A-TIG welding of AISI 409 ferritic stainless steel. Proc Mater Sci 2014; 5: 2402–2410.

13.

Chern

Tseng

Tsai

. Study of the characteristics of duplex stainless steel activated tungsten inert gas welds. Mater Des 2011; 32: 255–263.

14.

Tathgir

Bhattacharya

. Activated-TIG welding of different steels: influence of various flux and shielding gas. Mater Manuf Processes 2015; 31: 335–342.

15.

Martínez

Gomez-Gil

, et al. An artificial neural network based expert system fitted with genetic algorithms for detecting the status of several rotary components in agro-industrial machines using a single vibration signal. Expert Syst Appl 2015; 42: 6433–6441.

16.

Markopoulos

Manolakos

Vaxevanidis

. Artificial neural network models for the prediction of surface roughness in electrical discharge machining. J Intell Manuf 2008; 12: 283–292.

17.

Sahin

Topal

. Impact of information technology on business performance: integrated structural equation modelling and artificial neural network approach. Scientia Iranica B 2018; 25: 1272–1280.

18.

Kurtulmus

Kiraz

. Artificial neural network modelling for polyethylene FSSW parameters. Scientia Iranica B 2018; 25: 1266–1271.

19.

Kou

. Welding metallurgy. Hoboken, New Jersey, New Jersey, USA: John Wiley & Sons, 2003/9.

20.

Magudeeswaran

Sreehari

Sundarb

Harikannana

. Optimization of process parameters of the activated tungsten inert gas welding for aspect ratio of UNS S32205 duplex stainless steel welds. Defense Technology 2014; 10: 251–260

21.

Beheshti

Mariyam

Shamsuddin

. A review of population-based meta-heuristic algorithm. Int J Adv Soft Comput 2013; 5: 1–36.

22.

Jahromi

MHMA

Tavakkoli Moghaddam

Makui

, et al. Solving a one-dimensional cutting stock problem by simulated annealing and tabu search. J Indust Eng Int 2012; 8: 1–8.

23.

Ayubi Rad

. Comparison of artificial neural network and coupled simulated annealing based least square support vector regression models for prediction of compressive strength of high-performance concrete. Scientia Iranica A 2017; 24: 487–496.

24.

Lee

Kim

. Performance comparison of particle swarm optimization and genetic algorithm for inverse surface radiation problem. Int J Heat Mass Transfer 2015; 88: 330–337.

25.

Zhi

Jia

Zhang

, et al. Normal parameter reduction in soft set based particle swarm optimization algorithm. Appl Math Model 2015; 39: 4808–4820.

26.

Azadi Moghaddam

Kolahan

. Modeling and optimization of the electrical discharge machining process based on a combined artificial neural network and particle swarm optimization algorithm. Scientia Iranica B 2020; 27: 1206–1217.

27.

Hasheminejad

Sohankar

Hajiannia

. Predicting the collapsibility potential of unsaturated soils using adaptive neural fuzzy inference system and particle swarm optimization. Scientia Iranica A 2018; 25: 2980–2996.

28.

Azadi Moghaddam

Golmezergi

Kolahan

. Multi-variable measurements and optimization of GMAW parameters for API-X42 steel alloy using a hybrid BPNN–PSO approach. Measurement 2016; 92: 279–287.

29.

Korra

Vasudevan

Balasubramanian

. Optimization of A-TIG welding of duplex stainless steel alloy 2205 based on response surface methodology and experimental validation. Proc IMechE Part L: J Materials: Design and Applications 2018; 12: 1–10.

30.

Lugade

Deshmukh

. Optimization of process parameters of activated tungsten inert Gas (A-TIG) welding for stainless steel 304L using taguchi method. Int J Eng Res Gen Sci 2015; 3: 2091–2730.