Abstract
Aiming at the influencing factors of spot welding quality and the shortcomings of the method of judging the spot welding quality based on the monitoring waveform curves: it is impossible to deeply analyze the differences between the corresponding monitoring waveform curves and spot welding qualities. In this study, according to the monitoring waveform curves of the welding current, inter-electrode voltage, electrode pressure and other signals when the spot welder executes the process parameters, by establishing the HMM model to realize the judgment of spot welding quality. The proposed method was also applied to the experiments of spot welding quality judgment for verifying the algorithm effectiveness.
Get full access to this article
View all access options for this article.
References
Supplementary Material
Please find the following supplemental material available below.
For Open Access articles published under a Creative Commons License, all supplemental material carries the same license as the article it is associated with.
For non-Open Access articles published, all supplemental material carries a non-exclusive license, and permission requests for re-use of supplemental material or any part of supplemental material shall be sent directly to the copyright owner as specified in the copyright notice associated with the article.
