Hydrothermal behavior in a water-to-air double-pipe heat exchanger is studied experimentally and numerically. To achieve fully developed conditions, the heat exchanger was built with additional lengths before and after the test section. Commercial code (ANSYS 14) is used for numerical section. In order to enhance rate of heat transfer, discontinuous helical fins is utilized. Results show that Nusselt number augments with the enhancement of Reynolds number and Prandtl number, which are calculated at bulk temperature. The use of square section helical fins also shows a higher heat transfer enhancement rate than that of the circular one. Thermal performance factor is an increasing function of the open area ratio.
VermahmoudiYPeyghambarzadehSMHashemabadiSHet al.Experimental investigation on heat transfer performance of Fe2O3/water nanofluid in an air-finned heat exchanger. Eur J Mech B/Fluids2014; 44: 32–41.
2.
LeungCWWongTTProbertSD. Enhanced forced-convection from ribbed or machine-roughened inner surfaces within triangular ducts. Appl Energy2001; 69: 87–99.
3.
OzceyhanVGunesSBuyukalacaOet al.Heat transfer enhancement in a tube using circular cross sectional rings separated from wall. Appl Energy2008; 85: 988–1001.
4.
BayrakFOztopHFHepbasliA. Energy and exergy analyses of porous baffles inserted solar air heaters for building applications. Energy Build2013; 57: 338–345.
5.
MaTWangQZengMet al.Study on heat transfer and pressure drop performances of ribbed channel in the high temperature heat exchanger. Appl Energy2012; 99: 393–401.
6.
AkansuSO. Heat transfers and pressure drops for porous-ring turbulators in a circular pipe. Appl Energy2006; 83: 280–298.
7.
BragaCVMSaboyaFEM. Turbulent heat transfer, pressure drop and fin efficiency in annular regions with continuous longitudinal rectangular fins. Exp Therm Fluid Sci1999; 20: 55–65.
8.
GarciaAVicentePGViedmaA. Experimental study of heat transfer enhancement with wire coil inserts in laminar-transition-turbulent regimes at different Prandtl numbers. Int J Heat Mass Transfer2005; 48: 4640–4651.
9.
DurmusADurmusAEsenM. Investigation of heat transfer and pressure drop in a concentric heat exchanger with snail entrance. Appl Therm Eng2002; 22: 321–332.
10.
PromvongePEiamsa-ardS. Heat transfer enhancement in a tube with combined conical-nozzle inserts and swirl generator. Energy Convers Manage2006; 47: 2867–2882.
11.
YakutKSahinB. Flow-induced vibration analysis of conical rings used of heat transfer enhancement in heat exchanger. Appl Energy2004; 78: 273–288.
12.
Bala Bhaskara RaoJRamachandra RajuVDeepakBBVL. A smart prediction tool for estimating heat transfer and overall pressure drop from shell-and-tube heat exchanger. Proc IMechE, Part E: J Process Mechanical Engineering. DOI: 0954408916656388.
13.
HughesJPShawGHTuckerGSet al.Numerical simulations and experimental measurements of the flow in a multi-tube heat exchanger. Proc IMechE, Part E: J Process Mechanical Engineering2005; 219: 319–326.
14.
HughesJPJonesTERJamesPW. Numerical simulations and experimental measurements of the isothermal flow in a model tubular heat exchanger. Proc IMechE, Part E: J Process Mechanical Engineering2006; 220: 109–119.
15.
Sheikholeslami M and Ganji DD. Nanofluid convective heat transfer using semi analytical and Numerical approaches: A review. J Taiwan Inst Chem Eng 2016; 65: 43–77.
16.
Kandelousi MS. Effect of spatially variable magnetic field on ferrofluid flow and heat transfer considering constant heat flux boundary condition. Eur Phys J Plus 2014; 129–248.
17.
Sheikholeslami M, Ganji DD and Gorji-Bandpy M. Experimental and numerical analysis for effects of using conical ring on turbulent flow and heat transfer in a double pipe air to water heat exchanger. Applied Thermal Engineering 2016; 100: 805–819.
18.
IncroperaFDewittPD. Introduction to heat transfer, 5th ed. New York: John Wiley & Sons Inc, 2006.
