Steps for studying pressure variation resulting from oscillatory flow in reciprocating compressors is the main subject of this article. These variations in pressure are referred to as “pulsation”. Interacting between plant piping and equipment, possibility of resonance conditions, high vibrations, support degradation, and high risk of fatigue failures caused by dynamic forces and induced by the pulsation, are the most commonly observed problems.
EberleKCycaM. Design challenges for reciprocating compressors in specialty gas services. In: Gas machinery conference, Calgary, Canada, 2010, pp. 4–5.
2.
RenTSunC. Influence of valve in pulsation of reciprocating compressor. In: International compressor conference, Indiana, USA, July 1998, pp. 403–404.
3.
HanlonPC. Compressor handbook, New York: McGraw-Hill, 2001, pp. 6.5–6.8.
4.
HongWJinJWuR. Theoretical analysis and realization of step less capacity regulation for reciprocating compressors. J Process Mech Eng2009; 2: 206–208.
5.
BlochHP. Compressor and modern process application, New Jersey: John Wiley, 2006.
6.
NoredMBrunK. Advanced pulsation analysis for reciprocating compressors. Pipeline Gas J2011; 238(9): 1–3.
7.
API Standards. Reciprocating compressor for petroleum, chemical and gas service industries, 5th ed. Washington, DC: American Petroleum Institute, 2007.
8.
EgasB. PULSIM, A powerful tool for the control of vibrations in pipe systems, The Netherlands: TNO Institute of Applied Physics, 2002, pp. 4–6.
9.
GiacomelliEPasseriMBattagliP. Pressure vessel design for reciprocating compressors applied in refinery and petrochemical plants. In: Conference proceedings of PVP2005 ASME pressure vessel division, Denver, Colorado, USA, 17–21 July 2005, pp. 1–8.
